Xiaomi 8 lug 2024 Electric Scooter 4 Ultra User Manual

XIAOMI Electric Scooter 4 Ultra
User Manual

Read this manual carefully before use, and retain it for future reference.

Safety Reminder

Avoid hitting your head on door frames, elevators, and other overhead obstacles.

Watch out for Safety Risk

Always steer clear of obstacles
Do not press the acond alongside the sopoter aconlerator when you are walking

Do not Try Dangerous Actions

Unless otherwise authorized by the local lawes it is forbidden and illegal to ride forbidden and motorways, and expressways, e on public roads
Do not abruptly change the staring direction at high speed.

Do not hang bags or other heavy stuff on the handlebar. Do not ride on one foot. Do not use mobile phone or wear earphones when operating the scooter. Do not ride in the rain. Do not ride through puddles or any other (water) obstacles. Do not accelerate when going downhill, and brake in time to slow down. When on a steep slope, you need to step off the scooter and push. Do not ride with anyone else, including children. Do not keep your feet on the rear mudguard, Do not let go of the handlebar while riding. Do not try riding up or down stairs, nor try jumping over obstacles. Do not directly ride through puddles. If there is a puddle, avoid it at a low speed. Do not touch the mechanical brake.

Product Overview

1 Right Winglight
2 Handlebar
3 Buckle
4 Scooter Bell
5 Headlight
6 Brake Lever
7 Stem
8 Quick Release Lever
9 Quick Release Lever Lock
10 Front Reflector
11 Charging Port
12 Front Fork
13 Front Mudguard
14 Mechanical Brake
15 Front Rocker Arm (Built-in)| 16 Accelerator
17 Control Panel & Power Button
18 Bell Lever
19 Left Winglight
20 Winglight Buttons
21 Deck
22 Hook
23 Rear Mudguard
24 Taillight & Rear Reflector
25 Wheel Motor
26 Rear Rocker Arm (Built-in)
27 Number Plate
28 Side Reflector
29 Battery Compartment
30 Kickstand
---|---

Control Panel & Power Button

31 Speedometer. It displays the current speed when the scooter is working. When the scooter has an issue, it displays an error code. When the scooter is charging, it displays the current battery level.
32 Bluetooth: When the icon lights up, it indicates that the scooter has been successfully connected to the mobile device.
33 Temperature Warning: If the battery temperature is too high or too low, the thermometer icon will be on. This will result in reduced acceleration and possibly charging issues. Use or charge the scooter after its battery temperature returns to the normal operating range.
34 Winglight Indicating: When the scooter is on, press the left or right winglight button, then the corresponding winglight and the indicator on the control panel will blink. Meanwhile, the buzzer will respond at the same frequency. Press the button again to turn off the winglight.
35 Power Button: Press the button to turn the scooter on, and hold the button for 2 to 3 seconds to turn the scooter off. When the scooter is on, press the button to turn on/off the headlight and taillight, and press twice to cycle through the modes.
Note: The scooter will turn off automatically when it enters standby mode for more than 10 minutes. The standby mode means that the scooter is being charged or not locked when it is on and not running.| 36 Battery Level: The battery power is indicated by 5 bars, each representing approximately 20% of a full battery.
37 Inflation: When the inflation icon is on, it means that it is time to maintain the tires. Check the tire pressure and inflate the tires immediately to avoid tire damage caused by inadequate tire pressure. The recommended tire pressure is 40-45 psi.
Note: After performing maintenance, follow the instructions in the app to disable the inflation reminder.
38 Error Notification: When the wrench icon displays red, it indicates that the scooter has an error.
39 Lock: When the icon lights up, it indicates that the scooter is locked. You can lock/unlock the scooter via the Mi Home/Xiaomi Home app.
40 Modes: is for walking mode, and its maximum speed is 6 km/h; the headlight and the taillight will remain on when this mode is enabled. D is for standard mode. S is for sport mode. S+ is for sport plus mode, which has the same maximum speed as the sport mode and greater acceleration.
---|---

Package Contents

Elcetric Scooter

| User Manual
---|---
| Important Information
| Specifications
| Extension Nozzle (Connect the pump to the valve for easy pumping)
| Allen Key
| Screw 5
| Battery Charger

Assembly and Set-up

1. Put down the kickstand, and hold up the stem until it is completely in an upright position. Then lift the quick release lever lock, and push the quick release lever inward to the end.
2. Install the handlebar onto the stem, and make sure to install the handlebar in the correct direction.
3. Follow the number order as illustrated to pre-tighten the four screws with the included Allen key. Make sure the handlebar is correctly installed and then tighten the screws thoroughly.

Charge Your Scooter

1. Lift up the rubber flap.
2. Connect the battery charger to the charging port.
3. Disconnect the battery charger from the charging port when charging is completed.
4. Put back the rubber flap.

The scooter is fully charged when the LED on the battery charger changes from red (charging) to green (fully charged). sleep made in this case, the scooter cannot be tumed on. To wait the sleeps mode, charge the scooter for activate the battery

Connect with Mi Home/Xiaomi Home App,

1. Before being activated, the scooter w keep beeping when turned on and la Bimited to 10 km/h. When the scooter is used for the first time, it must be activated via the Mi Home/Klasmi Home app
2. Scan the QR code on the label attached to the control panel, on the right side of the deck, or un the back cover of the user manual to download the Mi Home/Xiaomi Home app, Note: The QR code is unique to your scootac pasa kaso it safe,
3. Open the Mi Home/Xiaomi Home app.
4. Tap”” on the top right corner and open “Scan” to scan the QR code on the label attached to the control panel, on the right side of the deck, or on the back cover of the user manual again. Then follow the instructions in the app to add the scooter.
5. Watch the riding guide video. Do not exit the video before finishing it. Otherwise, the activation will fail.
6. Tap “Activate” to activate the scooter. Once the scooter is activated, the beeping will stop and the speed restriction will be lifted.

Notes:
The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
The version of the app might have been updated, please follow the instructions based on the current app version.

Reset Bluetooth

Make sure the scooter is turned on. Press the accelerator and simultaneously press the power button 5 times to reset. When the scooter beeps, it has been reset successfully.

Restore Factory Settings

Make sure the scooter is turned on. Squeeze the brake lever, and simultaneously press and hold the accelerator and the power button for 7 seconds, When you hear a beep, the scooter has been restored to factory settings. This operation will completely delete the data stored in the scooter, please proceed with caution.
Note: The scooter cannot be restored to factory settings during riding or when locked.

How to Ride

1. Before Riding
   Wear a helmet, elbow pads and knee pads before riding. Note: Check the tire pressure before riding. The recommended tire pressure is 40-45 psi.

2. Starting & Accelerating
   Step on the deck with one foot, and slowly kicks off the other on the ground. When the scooter starts to coast, put both feet on the deck and gently press the accelerator. The accelerator can be used once the scooter is going over 5 km/h.

3. Steering
   Tilt your body to the steering direction as you turn, and slowly turn the handlebar.

4. Decelerating & Braking & Parking/
   Release the accelerator to slow down, and you can enable the energy recovery function to help reduce the speed. Squeeze the brake firmly to make an emergency stop. When the scooter slows down or stops, put one foot on the ground to get off the scooter. Put down the kickstand when parking the scooter. To avoid others using the scooter without your permission, you can lock the scooter when it is parked.

Lock & Unlock Your Scooter

When the scooter is locked the motor is locked and all the items on the control panel will automtheally go except the Bl, etooth ioms and the lickicom. If the uces beyond the lututection neng, the launch will dorminted will After the scooter is acted in the app the motor willbe locked and the power button will not function. If the scoater is moved torsibly ta real wheel cannot move normally, and wilmave a rolling resistance sccompanied by the buzzer alarm and a vibrating alert on the phone The function cannot prevent the sonoter from being inden de keep your acomer cafe. The scooter will automatically tum off after 24
The pione vibrate only if the page of The sector in the Mi Hamertiacmi Home ap

F old/Unfold & Carry,

1. Make sure the scooter a turned off and not being charged beform folding. Hold the stem, lift the quick rolesse lever look, and pull the quick release fever outward
2. Lift the quick release lever lock again, and pull the quick release lever outwards to pop the bottom folding hook out. Then fold the stem.
3. Align the buckle with the hook and secure them together.
4. Hold the stem with either one hand or both hands to carry.
5. When unfolding the scooter, pull the buckle upwards to release it from the hook.
6. Hold up the stem in an upright position, and make sure the folding hook is attached to the stem. Lift the quick release lever lock as indicated by ©, and then push the quick release lever inward to the end as indicated by 2.

Adjust the Mechanical Brake

Tool: 14 mm T-handle socket wrench (the tool needs to be prepared by the user).
Before adjustment, make sure the scooter is powered off and not charging. When the brake is too tight, use the tool to turn the nut on the screw rod counterclockwise, so as to slightly shorten the brake cable’s exposed bottom part. When the brake is too loose, use the tool to turn the nut on the screw rod clockwise, so as to slightly lengthen the brake cable’s exposed bottom part.

Inflate the Tire

Connect the pump to the extension nozzle. Remove the tire valve cap, and connect the extension nozzle and the valve securely together. Inflate the tire. Remove the extension nozzle, and install the valve сар. Check the tire pressure every month, and inflate the tires if the pressure is too low. The recommended tire pressure is 40-45 psi.

Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
For further information, please go to www.mi.com For detailed e-manual, please go to www.mi.com/global/service/userguide

This QR code is unique to your scooter and can also be found on the labels attached to the control panel and to the right side of the deck. It is used to connect the scooter with the Mi Home/Xiaomi Home app and contains important information about activating your scooter. Please keep this code safe.
Do Not Remove Made in China
Original instructions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>