xiaomi Temperature and Humidity Monitor 2 User Manual
- October 30, 2023
- Xiaomi
Table of Contents
Mi Temperature and
Humidity Monitor 2
User Manual
Temperature and Humidity Monitor 2
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Read this manual carefully before use and retain it for future reference.
Product Overview
Front:
Note: To use the lanyard hole, remove the back
cover of the monitor first.
Rear:
Accessory:
Installation
Installing the Battery
Remove the cover from the cover opening of the monitor, and place a CR2032
battery with the positive (+) side facing upwards, then reinstall the cover.
Note: Battery is not included and sold separately. You can use and
install your monitor in the following ways:
a. Placing: Directly place the monitor on the surface of the furniture
such as table, bookshelf.
b. Using the adhesive sticker: Remove the release liner from one side of
the adhesive sticker to stick it on the back of the monitor, then remove the
release liner from the other side to stick it at the desired place on the
wall. c. Hanging: Remove the back cover of the monitor and lead the
lanyard’s loop through the hole and around the hook. Reinstall the back cover,
then hang the monitor.
Note: Lanyard is not included and sold separately.
Display Description
Symbol
Instructions
Humidity / Temperature| Less than 19 °C| Between 19 °C and 27
°C| More than 27 °C
---|---|---|---
Less than 20 %| | ****|
Between 20 and 85 %| | |
More than 85 %| | |
Low Battery Notification
When the battery is at a low level, this symbol appears on the display.
Please replace the battery.
Smart Connection
Connect with Mi Home / Xiaomi Home App
This product works with Mi Home/Xiaomi Home app *. Control your device, and
interact it and other smart home devices with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search “Mi
Home/Xiaomi Home” in the app store to download and install it.
http://home.mi.com/do/index.html?model=miaomiaoce.sensor_ht.t2
Open Mi Home/Xiaomi Home app, tap “+” on the upper right, and then follow
prompts to add your device.
*** The app is referred to as Xiaomi Home app in Europe (except for
Russia). The name of the app displayed on your device should be taken as the
default.
Note:** The version of the app might have been updated, please follow the
instructions based on the current app version.
Connect with Other Devices
Make sure your temperature and humidity monitor is connected with Mi
Home/Xiaomi Home app. Tap ” ” on the upper right corner of the monitor’s user
interface, then follow the onscreen instructions to connect with other smart
devices.
Note: The monitor can
only connect with these devices supporting the function of Mi Bluetooth
Gateway. Please contact the customer service for detailed information.
Restore Factory Settings
Remove the back cover when the monitor is working normally and use a
conductive material to connect the two contact points above the battery for
about 5–8 seconds. Once the monitor restarts, the factory settings have been
restored and previously saved data has been cleared. Daily Car and
Maintenance
Please prevent water from getting into the monitor when cleaning it.
When the surface of the monitor is dirty, it can be wiped clean using a damp
soft cloth with some neutral detergent.
Precautions
Do not immerse the ventilation holes into any liquid.
Do not remove the monitor from a wall with force if it is attached with the
adhesive sticker, so as to avoid damage to the wall or the monitor.
This monitor is not suitable for use in environments with temperatures below
0°C. Please keep it away from harsh environments with high temperatures or
high humidity.
This monitor is designed to facilitate a healthy lifestyle but should not be
used as a measuring tool.
Specifications
| Name: | Mi Temperature and Humidity Monitor 2 |
|---|---|
| Model: | LYWSD03MMC |
| Materials: | ABS & PMMA |
| Dimensions: | 43 × 43 × 12.5 mm |
| Net Weight: | 18 g |
| Operating Voltage: | DC 2.5–3 V |
| Battery Type: | CR2032 (Not included) |
| Wireless Connectivity: | Bluetooth 4.2 Bluetooth Low Energy |
| Frequency Range: | 2402MHz-2480MHz |
| Maximum Output Power: | 4.16dBm |
| Temperature Measurement Range: | 0°C to 60°C |
| Temperature Accuracy: | ± 0.1°C |
| Humidity Measurement Range: | 0–99% RH |
| Humidity Accuracy: | ± 1% RH |
Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2
years. If you need repair or other services during the warranty period,
contact the product seller directly, you must provide the original proof of
purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
This product complies with the legal requirements of the following European Union directives: Directive No. 2014/30/EU.
WEEE
This product must not be disposed of as normal household waste in accordance
with the EU Directive on Waste Electrical and Electronic Equipment (WEEE –
2012/19 / EU). Instead, it shall be returned to the place of purchase or
handed over to a public collection point for the recyclable waste. By ensuring
this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. Contact
your local authority or the nearest collection point for further details.
Improper disposal of this type of waste may result in fines in accordance with
national regulations.
****
References
- Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
- alza.at
- Alza | Alza.co.uk
- alza.de
- alza.hu
- alza.sk