DOCK EDGE DE99002F Dock2Go DIY Floating Dock Kit Instruction Manual

DOCK EDGE DE99002F Dock2Go DIY Floating Dock Kit

Dimension

11
Float Fastener Kit (8-pack Lag Bolts & Flat Washers)| DE85125F| 6
LUMBER REQUIRED:| LENGTH| QTY.
---|---|---
1 – End Stringers| 2″ x 6″ x 96″| 2
2 – Center Stringers| 2″ x 6″ x 189″| 6
3 – Cross Stringer| 2″ x 6″ x 21″| 2
4 – Deck Boards| 5/4″ x 6″ x (At least 96″)| 32
Deck Screws (approx.)| #10 x 3″| 432

• IMPORTANT: CMP Group Ltd. assumes no responsibility or liability for the accuracy or representation of the graphic illustrations shown in this hardware guide.
• These graphic illustrations are not intended to be architectural drawings and are not to be substituted for engineered drawings. Each is intended as a guideline ONLY.
• CMP Group Ltd. does not warrant the quantities and/ or bill of materials to be accurate in all uses and applications. Individual dock structures may vary by necessity, preference, or design.
• It may be necessary to vary the amount of materials listed in this guide depending on dock size, material usage, necessity, and/ or the severity of the conditions to which the dock structure is subjected.
• All graphic illustrations are based on the use of a conventional framework of 2” x 6” lumber and decking lumber. The freeboard may be adjusted by using 2” x 8” or 2” x 10” lumber.
• Substitutions in lumber and hardware placement may affect floatation.
• 300 New Huntington Rd, Woodbridge, ON, L4H 0R4800-295-3625
• www.dockedge.com

Documents / Resources

| DOCK EDGE DE99002F Dock2Go DIY Floating Dock Kit [pdf] Instruction Manual
DE99002F, DE99006F, DE93122F, DE92104F, DE99013F, DE99242F, DE85100F, DE85125F, DE99002F Dock2Go DIY Floating Dock Kit, Dock2Go DIY Floating Dock Kit, DIY Floating Dock Kit, Floating Dock Kit, Dock Kit, Kit
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>