xiaomi S1 Smart Watch User Manual
- October 30, 2023
- Xiaomi
Table of Contents
S1 Smart Watch
User Manual
S1 Smart Watch
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Product Overview
Read this manual carefully before use and retain it for future reference. For more detailed information about the watch, please connect it with the app and view the instructions. Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
How to Connect
Download and install the app to better manage your watch and log in to your
Xiaomi account for more services.
Note: The version of the app might have been updated, please follow the
instructions based on the current app version.
- Press and hold the function button to turn on the watch. Scan the QR code displayed on the watch with your phone, then download and install the app. You can also download and install the app from app stores.
- Open the app, then log in your Xiaomi account. Select Add device and follow the instructions to add your watch.
https://watch.iot.mi.com/download.html?region=cn
Pairing
When an identical pairing code is displayed on both the phone and the
watch, tap Pair to complete the pairing.
Notes:
- During pairing, make sure the Bluetooth is enabled on your phone and the watch is well connected with your phone.
- If the pairing code appears on the watch but not on the phone, please check whether there is a pairing request in the notifications of the phone.
- If the watch cannot be found while adding it to the app, or cannot connect with your phone during use, please press and hold the function button of the watch for approximately 3 seconds to restore it to factory settings, then try again.
How to Use
- View notifications: Swipe down from the top on the home screen
- Open control panel: Swipe up from the boom on the home screen
- Switch widget: Swipe left or right when on the home screen page
- Go back: Swipe from the left edge to the right when on other screen pages
Power Button:
- Press and hold for about 3 seconds: Turn on the watch. When the watch is on, the screen will show the options to turn off, restart and restore to the factory settings.
- Press and hold for about 15 seconds: Force restart.
- Press when on the home screen: Enter the function list.
- Press when on other pages: Go back to the home screen.
Shortcut Button:
- Press when on the home screen: Enter the shortcut function (workout list by default).
GPS and A-GPS
The watch supports the Global Position System (GPS) tracking. When you do
outdoor exercises like running, the GPS will automatically start working and
notify you when the positioning is successful and quit tracking once you stop
exercises. The open field outdoor is the best place for the GPS tracking;
whereas when you are in a dense crowd, raising your arm up can better help GPS
to the positioning. It is recommended to start your workout only when the GPS
starts working.
The watch has an Assisted GPS (A-GPS) feature which can accelerate GPS
positioning via the data directly from the GPS satellites. Make sure your
watch is connected with the phone via the Bluetooth, the data can be
automatically synchronized from app to your watch, and the A-GPS data
automatically updated as well. In case the data has not been synchronized for
seven consecutive days, the A-GPS data will expire. If so, the positioning
information will need to be re-acquired. You can go to the page of outdoor
exercises on your watch to update the positioning information.
Charging
Recharge your band immediately when the battery level is low.
Safety Precautions
For daily use, comfortably tighten the watch around your wrist about one-
finger width away from your wrist bone. Adjust the strap to ensure the heart
rate sensor can collect data normally.
When using the watch to measure your heart rate, please hold your wrist still.
The watch has a water resistance rating of 5ATM (50 meters in depth). It can
be worn in the swimming pool, while swimming near the shore, or during other
shallow-water activities.
However, it cannot be used in hot showers, sauna, or diving. Furthermore,
remember to avoid the watch being directly impacted by swift currents during
water sports. The water-resistant function is not permanent and may decline
over time.
The touchscreen of the watch does not support underwater operations. When the
watch comes into contact with water, use a soft cloth to wipe away excess
water from its surface before use.
During daily use, avoid wearing the watch too tightly. Keep its contact area
dry and regularly clean the strap with water. Immediately stop using the watch
and seek medical assistance if the contact area on your skin shows signs of
redness or swelling.
The product information is listed on the back case of the watch for your
reference.
Please use the included charging dock to charge the watch. Only use the power
adapters that comply with the local safety standards or certified and supplied
by qualified manufacturers.
Keep the power adapter, charging dock, and watch in a dry environment while
charging. Do not touch the power adapter or charging dock with wet hands. Do
not expose the power adapter, charging dock, and watch to rain or other
liquids.
The operating temperature of the watch is 0oC to 45oC. If the ambient
temperature is too high or too low, the watch may malfunction.
The watch has a built-in battery. To avoid damage to the battery or the watch,
do not disassemble and replace the battery by yourself. Only the authorized
service providers can replace the battery; otherwise, it will cause potential
dangers even personal injuries if a wrong type of battery is used.
Do not disassemble, strike, crush or throw the watch into a fire. Stop using
the battery immediately if there is any swelling or fluid leakage.
Never throw the watch or its battery into a fire so as to avoid an explosion.
This watch is not a medical device, any data or information provided by the
watch should not be used as a basis for diagnosis, treatment, and prevention
of diseases.
The watch and its accessories may contain small parts. To avoid choking or
other hazards or damages caused by the children, keep the watch out of the
reach of children.
The watch is not a toy. Keep it out of reach of children.
If the watch will not be used for an extended period, turn it off after fully
charging and then store it in a cool and dry place. Recharge the watch at
least once every 3 months.
Do not put the battery in trash that is disposed of in landfills. When
disposing of the battery, comply with local laws or regulations.
Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
Keep the product’s indicator away from the eyes of children and animals while
the product is in use.
Please use the original charging cable in accordance with the specifications
described in the manual. The charging cable cannot be used to charge other
products, nor can it be used with chargers that exceed the input
specifications.
Replacement of a battery with an incorrect type that can defeat a safeguard
(such as catching fire, explosion, leakage of corrosive electrolyte etc).
Specifications
Product: | Smart Watch |
---|---|
Name: | Xiaomi Watch S1 |
Model: | M2112W1 |
Wireless Connectivity: | Bluetooth® 5.2; Wi-Fi IEEE 802.11b/g/n 2.4 GHz |
Battery Capacity: | 470 mAh |
Water Resistance: | 5 ATM Transmitting Frequency of GPS/GLONASS/Galileo/ |
BeiDou: | 1559–1610 MHz |
Watch Net Weight: | 69 g (Including strap) |
Strap Materials: | Calfskin leather/Fluorine rubber |
Buckle Material: | SUS316L |
Adjustable Length: | 157–241 mm |
Battery Type: | Lithium-ion polymer battery |
Input Current: | 1 A |
Input Voltage: | 5 V ( This symbol indicates DC voltage) |
Wireless Charging Operating Frequency: | 110–148 KHz |
Wi-Fi Operation Frequency: | 2400–2483.5 MHz |
Wi-Fi Maximum Output Power: | <20 dBm |
Bluetooth Operation Frequency: | 2400–2483.5 MHz |
Bluetooth Maximum Output Power: | <13 dBm |
Maximum Output Power: | -16.95 dBuA/m@10m |
Operating Temperature: | 0°C to 45°C |
Compatible with: | This watch only supports certain Android or iOS systems. For |
detailed information, please check this watch’s product page on www.mi.com or consult sales/customer service staff before purchasing.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2
years. If you need repair or other services during the warranty period,
contact the product seller directly, you must provide the original proof of
purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
This product complies with the legal requirements of the following European
Union directives: Directive No. 2014/53/EU.
WEEE
This product must not be disposed of as normal household waste in
accordance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase
or handed over to a public collection point for the recyclable waste. By
ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in
accordance with national regulations.
References
- Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
- alza.at
- Alza | Alza.co.uk
- alza.de
- alza.hu
- alza.sk
- Mi United States
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>