NITELIGHTER NLTL6W Interior Touch Lights Instructions
- June 9, 2024
- NITELIGHTER
Table of Contents
NITELIGHTER NLTL6W Interior Touch Lights Instructions
CAUTIONS/WARNING
- Do not allow children to install the light
- Do not allow children to change or install batteries
- Do not use light in areas that are wet or may become wet
- Use new batteries
- Do not mix old and new batteries or battery types
- Be mindful of wires, pipes or other objects behind the wall where the light is installed
- Adhesive pads may lift paint off walls if the pads are removed after installation
CONTENTS (Per Light)
- (4) Velcro Pad
- (1) Plastic Sheetrock Anchor
- (1) Screw
INSTALLATION
- Install 3, new AAA batteries in the back of the light.
- There are two ways to install the light.
A – Attach the Velcro to the 4 corners of the light. Lift the adhesive cover and press firmly into place.
B – Mark the location and install the anchor and screw into the wall. Hang the light from the hole support.
For questions, please contact SPQ Brands, M-F, 9am – 5pm, EST: 609-212-0221
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>