RC4WD V8 Small Block Engine Bay Instruction Manual
- September 3, 2024
- RC4WD
Table of Contents
RC4WD V8 Small Block Engine Bay
Chevrolet Blazer and K10
Instruction Manual Symbols Key
Recommended Tools
Tips for Assembly
- Use good quality hex drivers to avoid stripping screw heads.
- Use “Step” index for quantity and size of hardware to be used for assembly.
- Do not overtighten screws.
Recommendations for building your Dress up Kit for Engine Bay.
- Carefully remove all pieces from parts trees with a hobby knife or side cutters. Take care to trim the injection point from the parts.
- Test fit everything before gluing. Many areas will require extra attention to detail to ensure proper alignment.
Warranty
RC4WD non-electrical products are warranted to be free of defects in materials and workmanship when new. Our limited warranty does not cover damages due to normal wear and tear, user error of assembly or installation, user modifications, user’s failure to perform routine maintenance, addition of aftermarket parts or option parts. This warranty lasts 30 days after arrival for original purchaser. In the event of a defect under this warranty, RC4WD will, at our discretion, replace the product, provided our inspection indicates that an original defect exists. RC4WD reserves the right to replace any product which is no onger available with a product of comparable value and function. If RC4WD determines the repair is not covered under warranty guidelines, we will contact you to discuss your options. If you have any questions, please contact us via email at support@rc4wd.com. RC4WD warranties its electronics for 30 days from date of arrival. This covers all electrical items except items that are already noted on the individual product page.
Parts List
Dress Up Kit for Chevrolet Blazer and K10
Instruction Manual Symbols Key
Recommended Tools
Tips for Assembly
- Use good quality hex drivers to avoid stripping screw heads.
- Use “Step” index for quantity and size of hardware to be used for assembly
- Do not overtighten screws.
Recommendations for building your Dress up Kit for Engine Bay.
- Carefully remove all pieces from parts trees with a hobby knife or side cutters. Take care to trim the injection point from the parts.
- Test fit everything before gluing. Many areas will require extra attention to detail to ensure proper alignment.
Warranty
RC4WD non-electrical products are warranted to be free of defects in materials and work-manship when new. Our limited warranty does not cover damages due to normal wear and tear, user error of assembly or installation, user modifications, user’s failure to perform routine maintenance, addition of aftermarket parts or option parts. This warranty lasts 30 days after arrival for original purchaser. In the event of a defect under this warranty, RC4WD will, at our discretion, replace the product, provided our inspection indicates that an original defect exists. RC4WD reserves the right to replace any product which is no longer available with a product of comparable value and func-tion. If RC4WD determines the repair is not covered under warranty guidelines, we will contact you to discuss your options. If you have any questions, please contact us via email at sup-port@rc4wd.com. RC4WD warranties its electronics for 30 days from date of arrival. This covers all electrical items except items that are already noted on the individual product page.
Parts List
- Due to some parts needing to be permanently glued in place, we recommend that the RC4WD Small Block V8 Engine Bay Dress Up Kit for Chevrolet Blazer and K10 (Z-S0205) be purchased and installed first.
Accessories for Chevrolet Blazer and K10
Instruction Manual Symbols Key
Recommended Tools
Tips for Assembly
- Use good quality hex drivers to avoid stripping screw heads.
- Use the “Step” index for the quantity and size of hardware to be used for assembly.
- Do not overtighten screws.
Recommendations for building your Dress-up Kit for Engine Bay.
- Carefully remove all pieces from parts trees with a hobby knife or side cutters. Take care to trim the injection point from the parts.
- Test fit everything before gluing. Many areas will require extra attention to detail to ensure proper alignment.
- Paint 3d printed parts and allow 1 day of drying time before installing.
Warranty
RC4WD non-electrical products are warranted to be free of defects in materials
and workmanship when new. Our limited warranty does not cover damages due to
normal wear and tear, user error of assembly or installation, user
modifications, user’s failure to perform routine maintenance,the or addition
of aftermarket parts or option parts. This warranty lasts 30 days after
arrival for the original purchaser. In the event of a defect under this
warranty, RC4WD will, at our discretion, replace the product, provided our
inspection indicates that an original defect exists. RC4WD reserves the right
to replace any product that is no longer available with a product of
comparable value and function. If RC4WD determines the repair is not covered
under warranty guidelines, we will contact you to discuss your options. If you
have any questions, please contact us via email at
support@rc4wd.com. RC4WD warrants its electronics
for 30 days from the date of arrival. This covers all electrical items except
items that
are already noted on the individual product page.
OPTIONAL DECAL PLACEMENT
Placement optionnel des autocollants
737 N. Gateway St. Visalia, CA 93291 Web: www.rc4wd.com – Email: support@rc4wd.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>