LAVEI 600CT1627WD Fully Welded Steel Utility Cart Instruction Manual
- June 13, 2024
- LAVEI
Table of Contents
LAVEI 600CT1627WD Fully Welded Steel Utility Cart
Product Information
| Part | Description | Quantity |
|---|---|---|
| A | Steel Utility Cart | 1 |
| B | Rigid Caster | 2 |
| C | Swivel Caster w/ Brake | 2 |
| D | Steel Hex Screws | 16 |
| E | Split Washer | 16 |
| F | Normal Washer | 16 |
Product Usage Instructions
- Check for any damages and make sure to have all correct pieces before assembly.
- With the help of another person, flip the cart upside down so that the top shelf is touching the ground. The bottom of the cart will have four raised metal rectangles in each corner where the casters will go.
- Align a swivel caster with the corner below the handle of the cart and make sure all four holes are lined up correctly.
- To attach to the cart, place a split washer on the steel hex screw and then add a normal washer. Then, insert the screw with washers into one of the holes using a wrench. Repeat this process for the other three holes.
- Repeat steps 3 and 4 for the other swivel caster. Ensure both swivel casters are aligned with the handle at the back of the cart.
- For the two rigid casters, repeat the same process of attaching to the cart, but make sure they are aligned to the front of the cart.
- Check that all screws are tightly secured.
- Flip your cart over with the help of another person.
- Assembly is complete.
PARTS
- Check for any damages and make sure to have all correct pieces before assembly
- With the help of another person, flip the cart upside down so that the top shelf is touching the ground. The bottom of the cart will have four raised metal rectangles in each corner where the casters will go. See figure 1.
ASSEMBLY INSTRUCTIONS
- Align a swivel caster with the corner below the handle of the cart and make sure all four holes are lined up correctly. See figure 2.
- To attach to the cart, place a split washer on the steel hex screw and then add a normal washer.
- Then, insert the screw with washers into one of the holes using a wrench. Repeat this process for the other three holes. See figure 3.
- Repeat steps 3 and 4 for the other swivel caster.
- NOTE: Ensure both swivel casters are aligned with the handle at the back of the cart.
- For the two rigid casters, repeat the same process of attaching to the cart, but make sure they are aligned to the front of the cart. See figure 4.
- Check that all screws are tightly secured.
- Flip your cart over with the help of another person.
- ASSEMBLY COMPLETE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>