HAVIT Lightning HCP-602002-L Proline Pendant Connectors Instruction Manual
- June 3, 2024
- HAVIT LIGHTNING
Table of Contents
Lightning HCP-602002-L Proline Pendant Connectors
Instruction Manual
Product Specifications
Model No.| HCP-602002-L| HCP-603002-L| HCP-602002-T|
HCP-603002-T| HCP-602002-X| HCP-603002-X
---|---|---|---|---|---|---
Material| Aluminium|
Connector Type| L-Shape| T-Shape| X-Shape
Colour| Black| White| Black| White| Black| White
IP Rating| IP20
Input Voltage| 240v AC
Lamp Base| Built in LED
Lamp Wattage| 1x 12w| lx 15w| 1 x 20w
Colour Temp| TRI Colour – 3000k, 4000k, 5000k
Lumens| 1080Im, 11401m, 12001m| 13001m, 14001m, 15001m| 18001m, 19001m, 20001m
CRI| > 80
Wiring| Parallel
Dimmable| Yes -Triac or 0-1/10v
Warranty| 5 Years Replacement*
L-Shape Dimensions
T-Shape Dimensions
X-Shape Dimensions
Important Safety Issues:
- This product must be installed by a qualified electrician according to AS/NZS 3000.
- Ensure all electrical mains are disconnected before any installation.
- Modification of this product will void any warranty.
- Havit Commercial does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
- Aluminium and 304SS fittings must not be installed within 2km of any salt water environments.
- This form may be updated at any time due to product improvements, please check online installation form for most current version.
Steps for Installation for connecting lengths together:
- Make sure that the electrical circuit is free of voltage (master switch off )
- Remove end caps from pendant and or connector.
- Insert Joiners into postions on top and inside aluminium profile and tighten allen screws with tools provided
- Locate Connector cables on the inside of both fittings
- Connect cables together, If both cables have same connection, Remove internal piece by pulling gently on end to allow for connection.
- Slide fittings together and tighten allen screws on other fitting.
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Must be installed by a licensed electrician
Contact Details:
8/133 Beauchamp Road
Matraville NSW 2036
Australia
Tel: 02 9381 8383
Email:
sales@havitcommercial.com.au
Web: www.havitcommercial.com.au
| **Warranty Terms & Conditions*** | Additional Information |
|---|---|
| 
https://havitcommercial.com.au/pages/warranty-terms-and-conditions|
https://havitcommercial.com.au/