NINGBO 7122-19WH 5000 mAh Power Bank with iWatch Charger Instruction Manual
- September 12, 2024
- Ningbo
Table of Contents
5000 mAh Power Bank with
iWatch Charger/Type-C tip
Instruction Manual
Item AST-WR281
Model 7122-19WH
Features:
- Power bank ON/OFF Button
- 2-in-1 Tip
- Type-C built-in cable
- Type-C Input&output
- LED Indicator
- iWatch Wireless Charging Surface
What’s included:
– 1 x 5,000 mAh Wireless Power Bank
– 1 x Instruction Manual(Electronic manual)
Tech Specifications
- Capacity: 5000mAh/3.6V/18Wh
- Type-C Input&output: DC 5V/2A
- Type-C Built-in Cable Input&Output: DC5V/2A
- 2-in-1 Tip Output: DC 5V/2A
- Wireless Output: 2W (Max.)
LED Indicators
- Press the Power bank ON/OFF Button(1) once to view the remaining power capacity.
- Long press the button to turn OFF the Power bank.
| 1 | 2 | 3 | 4 |
|---|---|---|---|
| 1%-25% | 25%-50% | 50%-75% | 75%-100% |
Instructions:
-
Charging the Power bank:
• Charge the power bank fully before usage.
• Connect the built-in Type-C cable(3) to a power source.
• Once connected the LED Indicator(5) will begin to flash WHITE color when charging, once fully charged, WHITE LED will stop flashing. -
Charging Electronic Devices with the Power Bank:
• Connect the charging cable to your mobile phone/device using the appropriate Connector.
• Connect the Type-C part of the cable to the Type-C port(4) or use the built- in Type-C cable to contact your device , the LED Indicator will illuminate WHITE when charging.
• Remove the cable from your mobile device when it is fully charged. -
Charging iWatch with the Wireless Charging:
• Press the Power bank ON/OFF button(1) to turn on the wireless charging function,the green indicator will flash 3 times.
• LED indicator will glow green when in standby mode.
• Place the iWatch on the wireless charging surface(6).
• The device will automatically begin to charge, LED will flash GREEN when device is charging.
SAFETY PRECAUTIONS:
WARNING-When using this product, basic precautions should always be followed, including the following:
-
Read all the instructions before using the product.
-
Charge the power bank fully before initial use.
The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles. -
To reduce the risk of injury, close supervision is necessary when the product is used near children.
-
Do not expose the device to moisture.
-
Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury.
-
Do not use the device if damaged or modified.
-
Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
-
Do not disassemble the device. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury.
-
Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 212℉ may cause explosion.
-
Have servicing performed by a qualified repair person using only identical replacement parts.
-
This will ensure that the safety of the product is maintained.
-
Do not overcharge Phone.Unit may get hot With excessive use.Remove Phone when it is fully charged. Never charge for more than 7 hours at a time.
-
Attachments on the back of your phone can Impede the effectiveness of the wireless charger, And lead to overheating.Please remove attachments from the phone before charging on this device.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
※Warning:
Changes or modifications not expressly Approved by the party responsible for
compliance could void the user’s authority To operate the equipment.
NOTE:This equipment has been tested and found to comply with the limits
for Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
IC Statement
This device contains licence-exempt transmitter (s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 10cm between the radiator & body.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
Name of the Distributor:
Leedsworld Inc
Address of the Distributor:
400 Hunt Valley Road,
New Kensington,
PA 15068 USA.
WWW.PCNA.COM
FCC ID: 2A92I-AST-WR281
Made in China www.fsc.org
MIX
Paper Supporting responsible forestry
FSC® C170910
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>