KSIX BXTW10N Meteor Wireless Earphones User Manual

KSIX BXTW10N Meteor Wireless Earphones

Product Information

Specifications

• Earphones playtime: 4 hours
• Case playtime: 28 hours
• Earphone battery: 30 mAh
• Case battery: 300 mAh
• Frequency range: 20 Hz – 20 kHz
• Protection rating: IPX4 (splashproof)
• Operation range: 10 meters
• Technology: TWS (True Wireless Stereo)
• Noise cancelling: ENC, Dual Mic
• Sensitivity: -85 dBm
• Impedance: 32
• Earphone charging time: 1.5 hours
• Case charging time: 2.5 hours
• Case dimensions: 4.8 x 4.8 x 2 cm
• Earphones weight: 6.3 g (both)
• Case weight: 49.4 g
• Material: ABS earphones, metal case

Product Usage Instructions

Earphones LED Indicators
The earphones LED indicator provides information about various states:

• Pairing: Alternating white and red light on the right earphone
• Connected/Power on/Power off/Charging: Blue light every 5 seconds or fixed red light while charging

Turn On/Off the Earphones
The earphones turn on automatically when taken out of the charging case and turn off automatically when placed back in the case for charging.

Pairing the Earphones
To pair the earphones, activate Bluetooth on your device, search for “KSIX METEOR” in available devices, and select it. Once connected, the earphones will pair automatically when taken out of the case.

Troubleshooting
If earphones don’t turn on automatically, charge them. If only one earphone works, reset as instructed in the manual.

Usage Method
Use touch control for various functions:

• Play/Pause/Previous/Next song: Tap left/right earphone once or thrice
• Volume -/+: Tap left/right earphone twice
• Answer/Hang up calls/Reject calls: Tap left/right earphone once or press for 2 seconds
• Voice assistant: Press left/right earphone for 2 seconds

Resetting the Earphones
To reset, disconnect, unpair from Bluetooth settings, place in the charging case, and repeat pairing process.

Frequently Asked Questions (FAQ)

• Q: How do I know when the earphones are fully charged?
  A: The earphones have a fixed red light while charging, which turns off once fully charged.

• Q: Can I use only one earphone at a time?
  A: Yes, you can use either the left or right earphone independently.

Technical specifications

• Earphones playtime: 4 hours
• Case playtime: 28 hours
• Earphones battery: 30 mAh
• Case battery: 300 mAh
• Frequency range: 20 Hz – 20 kHz
• Protection rating: IPX4 (splashproof)
• Operation range: 10 meters
• Technology: TWS (True Wireless Stereo
• Noise cancelling: ENC, Dual Mic
• Sensitivity: -85 dBm
• Impedance: 32 Ω
• Earphones charging time: 1,5 hours
• Case charging time: 2,5 hours
• Case dimensions: 4.8 x 4.8 x 2 cm
• Earphones weight: 6,3 g (both)
• Case weight: 49,4 g
• Material: ABS earphones, metal case

IN THE BOX

• 1 x Pair of earphones
• 1 x Charging case
• 1 x USB-A to USB-C cable (25 cm)
• 2 x Pairs of earpads

Product details

• Earphones with touch control, LED indicators, microphone and charging pins.
• Charging case with LED indicator.
• Case USB-C charging port.
• 2 x pairs of included earpads.

Earphones LED indicators

The earphones LED indicator informs about the state of the connection, among other aspects:

Pairing| An alternating white and red light will flash quickly on the right earphone.
---|---
Connected| A blue light will flash every 5 seconds.
Power on| The earphones cannot be turned on manually.
Power off| The earphones cannot be turned off manually.
Charging| A fixed red light will show while charging.

Turn on/off the earphones

The earphones turn on automatically when taken out of the charging case. To turn them off automatically, place the earphones into the charging case. Once they are in the charging case, they will start to charge automatically.
Note: The earphones cannot be turned on or off manually.

How to pair the earphones

Take the earphones out of the charging chase to activate the pairing mode automatically. Activate the Bluetooth on your device, search for KSIX METEOR on the available devices list and select it. Once the connection has been successful, you will hear the word “Connected”. Once the earphones have been connected to a device, they will pair with it automatically when taken out of the charging case.
Troubleshooting: If the earphones do not turn on automatically, it should be due to low battery. Please, charge the earphones and the charging case. If only one earphone is working, it should be due to a connection failure. Please, reset the earphones as instructed later on in this manual.

Usage method

Use the touch control to make use of all the functions of the device:

times. To play the next song, tap the right earphone 3 times.
Volume -/+| To decrease the volume, tap the left earphone twice. To increase the volume, tap the right earphone twice.
Answer/Hang up calls| To answer an incoming call, tap the left or right earphone once.
Reject calls| To reject an incoming call, tap the left or right earphone during 2 seconds.
Voice assistant| To activate the voice assistant, tap the left or right earphone during 2 seconds.
---|---

How to reset the earphones

To reset the earphones disconnect them, access your smartphone’s Bluetooth settings, tap on KSIX METEOR and tap on “Unpair”. Place them on the charging case, take them out and repeat the pairing process.

Charging the earphones

To charge the earphones, simply place both inside the charging case, close the cover and they will start to charge automatically. The LED charging case indicators will light up for 5 seconds and the earphones LED indicators will flash red and blue 3 times. Make sure that both earphones are properly introduced in the case.
It takes about 1 and a half hours to charge the earphones up to full.

Charging the charging case
The charging case incorporates a USB-C port. The green LED charging case indicator will light up for 5 seconds when charging the earphones. When the charging case’s battery is low, this LED indicator will flash green light for 5 seconds.
It takes about 2 and a half hours to charge the charging case up to full. With the charging case being fully charged, you will be able to charge your earphones up to full about 7 times.
Troubleshooting: If the charging case LED indicator does not turn on during its charge, it should be due to a power supply issue. Please, check if the charging cable is correctly connected to the charging case. Check both ends of the cable, as well as the power supply state and the device you are using to charge, whether it is a wall charger, a powerbank or a PC port.

Maintenance recommendations

• Regularly clean the product with a dry cloth. The product must be disconnected or switched on when you clean it.
• Keep the connectors and/or ports free from dust, lint, etc. to prevent improper connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
• If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.

Safety information

Please read the following instructions before using the device for the first time:

• When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
• If the product is wet or damaged do not use it.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot weather)
• Do not throw the product into fire.
• Keep the product away from children.
• Disconnect or switch o_ the product if you are not going to use it for a long period of time.
• Do not use the device if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.
• Do not dismount or modify the product. These actions will invalidate the Warranty.

Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product.
For electronical devices with Bluetooth: Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.

• This product is designated for separate collection at an appropriate collection point. Do not dispose of it as household waste.
• The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
• If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
• Separate collection and recycling help conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• For more information, contact the retailer or the local authorities in charge of waste management.

CE Declaration of Conformity

We hereby declare that the product (s) listed below satisfies the provision for CE-marking according to the following European directive(s):

ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-17 V3.2.5 (2022-08)
EN 55032:2015/A11:2020
EN 55035:2017/A11:2020
ETSI EN 300 328 V2.2.2 (2019-07)
EN 62479: 2010
EN 50663: 2017
EN IEC 62368-1:2020+A11:2020

Article: BXTW10N_BXTW10R_BXTW10PL EAN: 8427542130750_8427542130767_8427542130743

Manufacturer: ATLANTIS INTERNACIONAL, S.L.

Address: Carrer del Crom, 53, 08907 L’Hospitalet de Llobregat, Barcelona (Spain)
Place and date of the declaration July, 29th 2023

Atlantis Internacional, S.L.
C. Crom, 53. L’Hospitalet de Llobregat
08907 Barcelona (Spain)
T.- (+34) 93 336 97 97
F.- (+34) 93 264 04 04
www.atlantistelecom.com
www.ksixmobile.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>