goobay 65885 GaN Multi Port Fast Charger Instruction Manual

goobay 65885 GaN Multi Port Fast Charger Instruction Manual

Product Overview

Specifications

socket, 1x USB-A QC (Quick Charge) socket
Input| 100-240 V          , 50/60 Hz, 2.5 A max.
Output PD1| 3.3-21.0 V , 5.0 A. 105.0 W max. or 5.0 V , 3.0 A, 15.0 W max. or9.0 V , 3.0 A, 27.0 W max. or 12.0 V , 3.0 A, 36.0 W max. or15.0 V , 3.0 A, 45.0 W max. or 20.0 V , 5.0 A, 100.0 W max. or28.0 V ____ , 5.0 A, 140.0 W max.
Output PD2/PD3| 3.3-21.0 V , 5.0 A. 105.0 W max. or 5.0 V , 3.0 A, 15.0 W max. or9.0 V , 3.0 A, 27.0 W max. or 12.0 V , 3.0 A, 36.0 W max. or15.0 V , 3.0 A, 45.0 W max. or 20.0 V , 5.0 A, 100.0 W max.
Output QC| 5.0 V , 3.0 A, 15.0 W max. or 9.0 V , 3.0 A, 27.0 W max. or12.0 V , 2.5 A, 30.0 W max. or. 20.0 V , 1.5 A, 30.0 W max.
Total output| 240.0 W max.
Average active efficiency| 86.2 %
Efficiency at low load (10 %)| 67.1 %
No-load power consumption| 0.03 W
Protection class| II
Dimensions| 113 x 86.0 x 32.5 mm
Weight| 533 g
Power cable
Connectors| Hybrid plug (Type E+F, CEE 7/7), C5 device socket (female)
Length| approx. 1 m
Weight| 130 g

Symbols used

Safety instructions

• The user manual is part of the product and contains important information for correct use.

• Read the user manual completely and carefully befo- re use.
  The user manual must be available for uncertainties and passing the product.

• Keep this user manual.
  Notes for network separation
  The product has no power switch and may be used only in easily accessible outlets to quickly remove it in an emergency and after use Voltage-free only with pulled plug.

• In case of emergency, during thunderstorms and after use, pull the product on its plug housing!

• Do not open the housing.

• Do not modify product and accessories.

• Do not short-circuit connectors and circuits.
  Risk of injury and stumbling.

• Mind placing cables in a way that nobody will be disabled and the cable not be damaged.
  A defective device may not be put into operation, but must be disconnected from mains and protected against further use.

• Use product, product parts and accessories only in perfect condition.

• Never use the device with defective mains cable!

• Do not kink or stretch the mains cable.

• Do not repair defective products yourself.

• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.

Not meant for children. The product is not a toy!

• Secure packaging, small parts and insulation against accidental use.
• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.
• Do not cover the product.

Description and function

Product
This product is a table charger including power cable for charging and operating up to four mobile devices via two USB-C™ PD ports and two USB-A QC ports. The product supports the USB PD (Power Delivery) standard and the USB QC (Quick Charge) standard.

Scope of delivery
USB-C™ PD GaN Multi-Port Fast Charger (240 W), Power cable, User Manual

Operating Elements
See Fig. 1.

1. USB-C™ PD1 socket (PD 3.1)
2. USB-C™ PD2 socket
3. USB-C™ PD3 socket
4. USB-A QC socket
5. C6 device inlet plug (male)
6. Safety plug
7. C5 device socket (female)

Intended use

We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

Preparation

1. Check the scope of delivery for completeness and in- tegrity.
2. Compare the specifications of all used devices and ensure compatibility.

Connection and operation

1. Connect the table charger to a power socket via the mains cable.
2. Connect your mobile devices to the table charger via suitable USB charging cables.
3. Disconnect all plug connections after use.
   USB charging cables are not included in the scope of delivery.
   The output voltage is automatically regulated and adapted to the respective connected device.
   The charger does not contain any controls to be operated during use.

Maintenance, Care, Storage and Transportation

The product is maintenance-free.

NOTICE Material damage

• Always unplug the product from the wall socket befo- re cleaning.
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.

Disposal instructions

According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can damage the health and pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection.
WEEE No: 82898622

EU Declaration of conformity

With the CE sign Goobay®, a registered trademark of the Wentronic GmbH ensures, that the product is conformed to the basic European standards and directives.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>