KSIX BLUEX08 Executive Handsfree Earset User Manual

September 10, 2024
KSIX

KSIX BLUEX08 Executive Handsfree Earset

Characteristics

Technical specifications

  • Playtime: Up to 20 hours
  • Battery: 120 mAh
  • Frequency range: 20 Hz – 20 kHz
  • Protection rating: IP64 (water-jet proof)
  • Operation range: 10 meters
  • Frequency range: 2.402GHz-2.480GHz
  • Maximum transmitted power in frequency ranges: +2dbm
  • Sensitivity: 42dB±3dB
  • Impedance: 16Ω
  • Charging time: 2 hours
  • Weight: 9 g
  • Material: ABS + PC

In the box

  • 1 x Handsfree earset
  • 1 x Ear pads
  • 1 x USB-A to USB-C cable (30 cm)
  • 1 x Manual

Product details

  1. USB-C charging port
  2. Multifunction button
  3. Microphone
  4. Indicator light
  5. Volume + / Next song
  6. Volume – / Previous song

Initial setup

Turn on/off the handsfree
To turn on the handsfree earset press the multifunction button for 3 seconds (red and blue lights will alternately flash). To turn them off, do the same (red and blue lights will flash 3 times until powering off).

How to pair the handsfree

  • Long press the multifunction button for 3 seconds, red and blue lights will alternately flash to enter the pairing state
  • Turn on your phone’s Bluetooth function and search “BLUEX08” or “KSIX EXECUTIVE” on the devices list, then click it and will automatically connect.
  • In the standby process, double-click the multi-function key to redial the last number you called. Next time you power on your handsfree; it will automatically pair with the last mobile phone with which the headset was paired. Blue and red lights will automatically flash.
  • Troubleshooting : If the handsfree do not turn on automatically, it should be due to low battery. Please, charge the handsfree. If they do not pair with your device properly, reset the handsfree as instructed later in this manual.

Usage method

Play/Pause| Click the multifunction button

once to play or pause the music.

---|---
Volume – / +| Click (+) button to increase the volume. Click (-) button to

decrease the volume.

Previous/ Next song| Long press (-) button for 3 seconds to go to the previous song. Long press (+) button for 3

seconds to go to the next song.

Answer/ Hang up calls| Click the multifunction button to answer the call or hang up the call.
Reject calls| Long press the multifunction button.
Call last number called| Double-click the multi-function key.

How to disconnect/reset the handsfree
To disconnect the handsfree earset from the phone (for example, to connect your phone to another device), choose one of the following instructions:

  • Turn off the earset.
  • Use the phone’s Bluetooth function to disconnect the handsfree from the phone.
  • Move the earset 10M away from the phone.

Charging the handsfree
Before using the earset for the first time, we recommend to fully charge it. When charging, the indicator light is red, the battery will be full when the red light goes off. If the light flash once every 20 seconds it’s a reminder of low battery.

Troubleshooting : If the handsfree LED indicator does not turn on during its charge, it should be due to a power supply issue. Check both ends of the cable, as well as the power supply state and the device you are using to charge, whether it is a wall charger, a powerbank or a PC port.

Connect two phones
First of all, disconnect the handsfree from the paired phone, without forgetting the connection or removing the pairing. Then, the earset will automatically go back to pairing status. After that, search “BLUEX08” or “KSIX EXECUTIVE” with another phone. Once paired with the second phone, connect the handsfree earset again to the first phone. Connect or disconnect each phone to the handsfree depending on which one you will need to use.
Note : In case the device is not making any sound, make sure the earset is activated and fully charged, paired with your phone, your connection is enabled and that you are within 10m from the phone. If having checked all of this, it still does not work, try the following:

  • Re-charge the earset
  • Restart the phone
  • Start the phone Bluetooth and delete the previous pairing history
  • Re-match the earset with the phone

Maintenance recommendations

  • Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it.
  • Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
  • Avoid breaking the device. Do not put objects over it or bend it too strong.
  • If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
  • Do not wet the product. Keep it always in a dry place, away from humidity.
  • When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
  • If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
  • Avoid dropping or hitting the product. It might be damaged.
  • Do not use the product for anything other than its intended use.
  • Please recycle the product in accordance with local environmental laws and regulations.

Safety information
Please read the following instructions before using the device for the first time:

  • When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
  • If the product is wet or damaged do not use it.
  • Do not use the product with wet hands.
  • Do not leave the product in contact with flammable materials.
  • Do not expose the product to high temperatures (for example: inside a car during hot weather).
  • Do not throw the product into fire.
  • Keep the product away from children.
  • Disconnect or switch off the product if you are not going to use it for a long period of time.
  • Do not use the device if you perceive any visible defects.
  • Do not attempt to open or puncture the product. You might damage it.
  • Do not use the product with incompatible devices.
  • Do not dismount or modify the product. These actions will invalidate the Warranty.

Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product. Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.

  • This product is designated for separate collection at an appropriate collection point. Do not dispose of it as household waste.
  • The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
  • If the equipment uses batteries, they must be removed from the equipment and disposed of in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
  • Separate collection and recycling help conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
  • For more information, contact the retailer or the local authorities in charge of waste management.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals