UMIDIGI TG4FBG9TA G9 Tab User Manual

UMIDIGI TG4FBG9TA G9 Tab

Thank You

Building a great tablet is hard enough, so building a great tablet on a budget should be infinitely more difficult. Big thanks to all who made this super tablet super awesome by contributing valuable time and developing hardware, software & other developments. Thanks for choosing UMIDIGI products. Thanks to your support, our value can be realized and we can constantly move forward to create smart devices with better user experience.

Scan following QR-codes to follow us and enter giveaway to win a UMIDIGI smart device for free!

VK: vk.com/umidigi

YouTube : youtube.com/umidigi

Facebook: facebook.com/umidigi

Twitter: twitter.com/umidigi

Instagram: instagram.com/umidigi

Safety Statement

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radian technician for help.

ISED Warning

Operation of 5150-5250 MHz is restricted to indoor use only. This device complies with Innovation, Science, and Economic Development Canada license- exempt RSS standardly(s).Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

(SAR) information

The device has been tested and comply with FCC/ISED SAR limits.

In all EU member states, the operation of 5150-5250 MHz is restricted to indoor use only.

PRODUCT HEX-VISION IMAGE

VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.

POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen.

CARD INSERT MANUAL

Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card down when inserting into the slot.
Be aware of the direction of the cut edge when placing the Nano-SIM card into the slot.
Reminder:
Please use standard Nano-SIM card. Please don’t use a non-standard card that is hand-cut, in order to prevent the SIM slot and card tray from being damaged and card -rejection situation that Amy cause damage to the tablet.

TF Card Installation

Please place the metal contact of the TF card down, be aware of the direction of the cut edge. Place the card onto the tray and insert into the device.
Reminder:
Please turn off the tablet before changing or replacing the TF card. TF card does not come with the tablet, please purchase separately.

DUAL-SIM MANAGEMENT

Please choose which SIM card slot to be the main one to be for 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3G/ 2G via Setting > Network & Internet > Mobile network > Preferred network type.

NETWORK CONNECTION

Connecting WLAN
Into the setting of WLAN via Settings > Network & Internet > Wi-Fi When WLAN is on, a list available Wi-Fi connection will appear.
Click on the one you want to connect to, enter the password if the network is encrypted, then click Connect. When it’s a public network, just click Connect When the network shows “connected”, it is available to use.
Bluetooth Function
Into the setting of Bluetooth function via Settings > Connected devices > Bluetooth Enable the Bluetooth function by clicking the Menu Button then select “Refresh”, then the tablet will search for available Bluetooth devices for pairing and list on the screen.
Click on the one you want to pair with, then click “Pair “on the dialogue pop- up.
Documents are available for transmission after Bluetooth pairing .
Reminder:
Slide down the status bar to open the shortcut switches for Bluetooth and other functions.

WLAN Hotspot Setting

Click on via Settings > Network & tethering > Wi-Fi hotspot to turn on the Portable WL.AN Hotspot function.When setting up WL.AN hotspot, enter your user name in “Network Name”and password, then click Save. Another device can use the WL.AN hot-spot by searching and entering the password.

Reminder:
Please enable the Data Connection before enabling the network sharing function.
Your mobile traffic will be shared by other devices, so please use it carefully. The signal of the WLAN hot-spot depends on the signal strength and devices.

CAMERA
Aim the camera at the shooting object, the tablet will start focus automatically; or you can click on the screen to choose the object you want to focus on, then click “Capture”icon to take photos .
You can also choose other modes such as video recording to record videos.

INSTRUCTIONS FOR DUAL-CARD STANDBY

“Dual card, dual standby, single pass” means you can insert two SIM cards and have them both “standby”, but cannot make phone calls at the same time. During the standby mode both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls nor make phone calls.

SECURITY INFORMATION

Security information (including BS, ES, battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications.
UMIDIGI holds disclaimer for the peri or mance problem or incompatibility caused by third-party applications, registry editing, OS software modifying. Customizing the OS may cause the device or some applications fail to work properly.
Please prevent the device or the battery in extreme cold/hot condition.The extreme temperature will lead to deformation of the tablet and reduce the charging capacity and battery life.
Please only use the custom designed and approved battery and recharger by UMIDIGI. Incompatible battery and recharger may cause damage to the tablet.
Please abide by local regulation when disposing of the used batteries and tablet.
Please do not place the battery or the tablet onto or inside heating devices such as microwave, oven or radiator. The battery may explode if it gets too hot.
Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside, it may cause internal short and overheating.

Follow UMIDIGI community, a place where you can share and discuss with UMIDIGI user keep posted with the most up-to-day news.

Customer Support

Manufacturer:Shenzhen Youmi Intelligent Technology Co.,Ltd.Add:406-407 Jinqi Zhigu Building,4/F, 1 Tangling Road,Nanshan District, Shenzhen City,China.
Amazon service Email :
amazonservice@umidigi.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>