UMIDIGI G7 5G Smartphone User Guide

UMIDIGI G7 5G Smartphone

Product Information

• Specifications:
  • Front Camera: Ambient Light and Distance Sensor
  • Main Camera: Dual LED Flash, Infrared Light
  • Rear Camera: Infrared, Hotkey
  • Power Button: Fingerprint Sensor integrated
  • Audio: Dual MIC, Audio Jack, Speaker
  • Connectivity: Type-C USB

Product Usage Instructions

• Warnings:
  • Ensure to follow these warnings for safe usage of the device:
  • Avoid placing the phone or battery near heating equipment to prevent overheating.
  • Only use the original charger, data cable, and battery to avoid hazards.
  • The back cover is not removable.
• How to Restart the Phone:
  • To restart the phone, press and hold the Power Button until the UMIDIGI restart animation is displayed.
• Transferring Old Mobile Content to a New Mobile:
  • You can transfer data from your old phone to the new UMIDIGI G7 5G in two ways:
• Google Account Backup and Restore:
  • Ensure both phones are connected to Wi-Fi and signed in with the same Google Account.
  • Back up data on the old phone by going to Settings > System > Backup and enabling Back up to Google Drive.
  • Sign in with the same Google Account on the new phone during setup for automatic sync and restore.
• Transfer Cable:
  • Use a USB-C transfer cable to directly connect old and new phones for data transfer.

FAQs

• Q: Can I remove the back cover of the UMIDIGI G7 5G?
  • A: No, the back cover of the UMIDIGI G7 5G cannot be removed.
• Q: How do I restart the UMIDIGI G7 5G?
  • A: Press and hold the Power Button for a few seconds until the restart animation appears on the screen.

Greetings From UMIDIGI Mobile

• This guide will show you how to use the phone and its important functions.
• You may also visit UMIDIGI’s official website to get more information about the phone.

Warning

• Security information (including BS, ES, and battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications.
• UMIDIGI holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, and OS software modifying.
• Customizing the OS may cause the device or some applications to fail to work properly.
• Do not place the phone or battery near or inside heating equipment, cooking equipment, or high-pressure vessels (such as microwave ovens, induction cookers, electric ovens, heaters, pressure cookers, water heaters, gas stoves, etc.) to prevent the battery from overheating which may lead to an explosion.
• The original charger, data cable, and battery shall be used. Unapproved chargers, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards.
• When charging, please place the device in an environment that has a normal room temperature and good ventilation, it is recommended to charge the device in an environment with a temperature ranging from 5°C~35°C.
• The back cover can’t be removed.

MORE INFO

How to Restart the Phone

• Press the Power Button for a few seconds until the UMIDIGI restart animation is displayed to restart the phone.

How to Transfer Old Mobile Content to a New Mobile

• You can use the UMIDIGI Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one in the following two approaches.

Google Account Backup and Restore

1. Ensure that both phones are connected to Wi-Fi and have your Google Account signed in.
2. On the old phone, go to “Settings” > “System” > “Backup” and ensure that “Back up to Google Drive” is enabled. Back up your data.
3. On the new phone, sign in with the same Google Account during setup. Your apps, contacts, calendar events, and some other settings should automatically sync and restore.

Transfer Cable

• You can use a USB-C transfer cable to directly connect the old and new phones and transfer data.

Specification

1x Protector Film (applied) 1x Phone Case

1x Power Adapter 1x SIM Tray Ejector

1x USB Type-C Cable 1x Quick Start Guide

Google and Android are trademarks of Google LLC.

Thanks for choosing UMIDIGI products!

• We will always focus on innovation and continue to provide high-quality smart devices for a better user experience.
• Please leave us a review or feedback if you like it. We do appreciate it.

Follow UMIDIGI:

• YouTube: youtube.com/umidigi.
• VK: vk.com/umidigi.
• Facebook: facebook.com/umidigi.
• Twitter: twitter.com/umidigi.
• Instagram: instagram.com/umidigi.

FCC

Safety Statement FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISEDC Warning

Operation of 5150-5250 MHz is restricted to indoor use only. This device complies with the Innovation, Science, and Economic Development Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Specific Absorption Rate(SAR) information

• SAR tests are conducted using standard operating positions accepted by the FCC/ISED with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
• Before a new model phone is available for sale to the public, it must be tested and certified to the FCC/ISED that it does not exceed the exposure limit established by the FCC/ISED, tests for each phone are performed in positions and locations as required by the FCC/ISED.
• For body-worn operation, this model phone has been tested and meets the FCC/ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the body.
• Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.

The E-label information

To access the e-label information, in the device,

• Choose: Settings > About phone > Authentication information In all EU member states, the operation of 5150-5250MHz is restricted to indoor use only.

CONTACT

• Manufacturer:
  • Shenzhen UMIDIGI intelligent Technology Co., Ltd
• Add:
  • 406-407 Jinqi Zhigu Building,4/F, 1 Tangling Road, Nanshan District,
  • Shenzhen City, Guangdong Province China
  • PG3NBG7YB

References

• Login • Instagram
• VK.com | VK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>