UMIDIGI A15 Pro Smartphone User Guide

Quick Start Guide
A15 Pro
PA3NB15PA

Greetings From UMIDIGI Mobile

This guide will show you how to use the phone and its important functions. You may also visit UMIDIGTI’s official website to get more information about the phone. Warning

• Security information (including BS, ES, and battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. UMIDIGI holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, and OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly.
• Do not place the phone or battery near or inside heating equipment, cooking equipment, or high-ressure vessels (such as microwave ovens, induction cookers, electric ovens, heaters, pressure cookers, water heaters, gas stoves, etc.} to prevent the battery from overheating which may lead to an explosion.
• The original charger, data cable, and battery shall be used. Unapproved chargers, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards.
• When charging, please place the device in an environment that has a normal room temperature and good ventilation, it is recommended to charge the device in an environment with a temperature ranging from 5°C~35°C.
• The back cover can’t be removed.

How to Restart the Phone
Press the Power Button for a few seconds until the UMIDIGI restart animation is displayed to restart the phone.
How to Transfer Old Mobile Content to a New Mobile
You can use UMIDIGI Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one in the following three approaches.
Google Account Backup and Restore

1. Ensure that both phones are connected to Wi-Fi and have your Google account signed in.
2. On the old phone, go to “Settings” > “System” > “Backup” and ensure that “Back up to Google Drive”is enabled. Back up your data.
3. On the new phone, sign in with the same Google account during setup. Your apps, contacts, calendar events, and some other settings should automatically sync and restore.

Transfer Cable
You can use a USB-C transfer cable to directly connect the old and new phones and transfer data.

Specifications

2400×1080 Resolution
Processor| MTK Helio G99 Octa-Core
[email protected] GHz [email protected] GHz Arm Mali-G57 MC2
Memory| 12+12GB Extended RAM, 256GB ROM
Battery & Charging| 5000mAh
66W Fast Charging Type-C/ USB 3.0
Rear Camera| 108MP Main Camera
50MP Ultra-Wide Camera 8MP Macro Camera
Front Camera| 32MP Front Camera
NFC| Support Google Pay
Hotkey| Yes
Security & Authentication| Al Face Unlock & Side Fingerprint Sensor
SIM Card & TF Card| Dual Nano-SIM Card
Operating System| AndroidTM 13
In the Box| lx UMIDIGI A15 Pro
lx Protector Film (applied)
lx Phone Case
lx Power Adapter
lx SIM Tray Ejector
lx USB Type-C to Type-C Cable
lx Quick Start Guide

Thanks for choosing UMIDIGI products!
We will always focus on innovation and continue to provide high-quality smart devices for a better user experience. Please leave us a review of feedback if you like it. We do appreciate it.
Follow UMIDIGI:

| YouTube: youtube.com/umidigi
---|---
| VK: vk.com/umidigi
| Facebook: facebook.com/umidigi
| Twitter: twitter.com/umidigi
| Instagram: instagram.com/umidigi

Safety Statement FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could  void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
ISED Warning
Operation of 5150-5250 MHz is restricted to indoor use only.
This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Specific Absorption Rate(SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC/ISED with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC/ISED that it does not exceed the exposure limit established by the FCC/ISED , tests for each phone are performed in positions and locations as required by the FCC/ISED.
For body-worn operation, this model phone has been tested and meets the FCC/ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the body.
Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.
The E-label information
To access the e-label information, in the device,
Choose: Settings > About phone > Authentication information
EU Regulatory Information:

| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| Fl| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK

In all EU member states, the operation of 5150-5250MHz is restricted to indoor use only.

EGSM900: 880-91 5MHz(TX), 925-960MHz(RX)
DCS1800: 1710-1785MHz(TX), 1805-1880MHz(RX)
WCDMA 2100: 1920-1980MHz(TX), 2110-21 70MHz(RX)
WCDMA 900: 880-915MHz(TX), 925-960MHz(RX)
LTE Band 1: 1920-1980MHZz(TX), 21 10-2170MHz(RX)
LTE Band 3: 1710-1785MHZz(TX), 1805-1880MHz(RX)
LTE Band 8: 880-915MHz(TX), 925-860MHz(RX)
LTE Band 28: 703-748MHz(TX), 758-803MHz(RX)
LTE Band 40: 2300-2400MHz(TX/RX)
Bluetoot/BLE 1M: 2402-2480MHz(TX/RX)
BLE 2M: 2404-2478MHz(TX/RX)
2.4G WI-Fi: 2412-2472MHz/2422-2462MHz(TX/RX)
5G Wi-Fi: §150-5250MHz, 5725-5850MH2(TX/RX)
NFC: 13.56MHz(TX/RX)
BDS B11, GLONASS G1, GPS L1 C/A, SBAS L1: 1559-1610 MHz(RX)
FM: 87.5-108MHz(RX)| RF-Output Power:
EGSM900: 33.21dBm (GMSK)
DCS1800: 30.68d8m (GMSK)
WCDMA 2100: 24.48dBm
WCDMA 900: 24.32dBm
LTE Band 1: 22.0dBm
LTE Band 3: 24.7dBm
LTE Band 8: 23.9dBm
LTE Band 28: 24.1dBm
LTE Band 40: 23.0dBm
Bluetooth: 5.29dBm
BLE: 2.03dBm
2.4G Wi-Fi: 17.49 dBm
5G WL-FI:
5150-5250MHz: 13.15dBm
5725-5850MH7z: 13.55dBm
NFC: 20.55dBuA/m @ 3m

Manufacturer:
Shenzhen Youmi Intelligent Technology Co., Ltd
Add: 406-407 Jingi Zhigu Building,4/F, 1
Tangling Road, Nanshan District,
Shenzhen City, Guangdong Province China
Made in China

Documents / Resources

| UMIDIGI A15 Pro Smartphone [pdf] User Guide
A15 Pro, A15 Pro Smartphone, Smartphone
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>