UMIDIGI G5 Mecha RP08 User Manual
- October 30, 2023
- Umidigi
Table of Contents
UMIDIGI G5 Mecha RP08
Product Information
The G5 Mecha is a smartphone manufactured by UMIDIGI, a registered trademark by Shenzhen Youmi Intelligent Technology Co., Ltd. It runs on the Android 13 operating system and is powered by a T606 chipset with 2 Cortex-A75 and 6 Cortex-A55 cores, and an Arm Mali G57 GPU. It comes with 8/4GB of RAM, 128GB of internal storage, and is equipped with a 6000mAh battery with a side- mounted fingerprint sensor for security. The phone features a 6.6-inch screen with a resolution of 1612×720 pixels, a 50MP+2MP rear camera and an 8MP front camera. It supports LTE FDD:B2/5/7/12, LTE TDD:B 41, WCDMA:B2/5, GSM:B2/5 bands for connectivity along with IEEE802.11 ac/a/b/g/n Wi-Fi, Bluetooth 5.0, GPS, Beidou, Glonass, and Galileo for navigation. It has a Type-C USB port for charging and data transfer.
Product Usage Instructions
- Insert a Nano SIM card or two Nano SIM cards or one Nano SIM card and one TF card into the SIM/TF slot.
- Charge the phone using the Type-C cable and power adapter provided in the package.
- Press and hold the side-mounted fingerprint sensor/power button to turn on the phone.
- Follow the on-screen instructions to set up the phone.
- Use the phone as per your requirement for making calls, sending messages, browsing the internet, taking photos, etc.
Building a great phone is hard enough, so building a great phone on a budget should be infinitely more difficult. Big thanks to all who made this superphone super awesome by contributing valu- able time and developing hardware, software & other developments. Thanks for choosing UMIDIGI products, thanks to your support our value can be realized and we can constantly move forward to create smart
Scan following QR-codes to follow us and enter giveaway to win a UMIDIGI smart device for free!
- VK : vk.com/umidigi
- YouTube : youtube.com/umidigi
- Facebook : facebook.com/Umidigi
- Twitter : twitter.com/umidigi
- Instagram : instagram.com/umidigi
UMIDIGI is registered trademark by Shenzhen Youmi Intelligent Technology Co., Ltd. All other trademarks are the property of their respective owner. Visit www.umidigi.com for more information
PRODUCT HEX-VISION IMAGE
POWER BUTTON : Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen.
CARD INSERT MANUAL
Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card down when inserting into the
slot. Be aware of the direction of the cut edge when placing the Nano-SIM card
into the slot.
Reminder:
Please use standard Nano-SIM card. Please don’t use a non- standard card that
is hand-cut, in order to prevent the SIM slot and card tray from being damaged
and card-rejection situationthat may cause damage to the phone.
TF Card Installation
Please place the metal contact of the TF card adown, be aware of the direction
of the cut edge. Place the card onto the tray and insert into the device.
Reminder:
Please turn off the phone before changing or replacing the TF card.TF card
does not come with the phone, please purchase separately. Please do not plug
in and out of the SIM card tray when the phone is on. Be careful when using
the slot thimble from scratching the phone.
DUAL-SIM MANAGEMENT
Please choose which SIM card slot to be the main one to be for 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3G/2G via Setting> Network&Internet> Mobile network Preferred network type
FINGERPRINT IDENTIFICATION
You can unlock the screen by fingerprint ID function. Click Setting> Security &Location> Fingerprint, please enter your fingerprint information by following the in structions on the screen.
Reminder:
Please ensure your finger clean and dry when giving your fingerprint
information to the phone. Please enter the information of your finger pulp for
fingerprint information. When unlocking the phone by fingerprint, please place
your finger pulp on the touch ID sensor for about a second
NETWORK CONNECTION
Connecting WLAN
Into the setting of WLAN via Settings> Network8Internet> Wi-Fi When WLAN is
on, a list available WiFi connection will appear. Click on the one you want to
connect to, enter the password if the network isencrypted, then click Connect.
When it’s a public network, justclick Connect When the network shows
“connected”, it is available to use
Bluetooth Function
Into the setting of Bluetooth function via Settings>Connected devices>
Bluetooth Enable the Bluetooth function by clicking the Menu Button then
select “Refresh”, then the phone will search for available Bluetooth devices
for pairing and list on the screen. Click on the one you want to pair with,
then click “Pair” on the dialog pop-up.Documents are available for
transmission after Bluetooth pairing.
Reminder:
Slide down the status bar twice to open the shortcut switches for Bluetooth
and other functions.
WLAN Hot-spot Setting
Click on via Settings>Network&Internet>Hotspot&tethering >Wi-Fi hotspot to
turn on the Portable WLAN Hot-spot function. When setting up WLAN hot-spot,
enter your user name in “Network Name” and password, then click Save. Another
device can use the WLAN hot-spot by searching and entering the password of the
password. Reminder: Please enable the Data Connection before enabling the
network sharing function. Your mobile traffic will be shared by other devices,
so please use it carefully. The signal of the WLAN hot-spot depends on the
signal strength and devices
CAMERA
Aim the camera at the shooting object, the phone will start focus
automatically; or you can click on the screen to choose the object you want to
focus on, then click “Capture” icon to take photos. You can also choose other
modes such as video recording, beautifying, panorama to take photos/videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
“Dual card, dual standby, single pass” means you can insert two SIM cards and
have them both “standby”, but cannot make phone calls at the same time. During
the standby mode both cards are available for receiving phone calls, but once
one of the cards is activated, the other one cannot receive phone calls nor
make phone calls.
SECURITY INFORMATION
Security information (including BS, ES, battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. UMIDIGI holds disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, OS software modifying. Customizing the OS may cause the device or some applications fail to work properly. Please prevent the device or the battery in extreme cold/hot condition. The extreme temperature will lead to deformation of the phone and reduce the charging capacity and battery life. Please only use the custom designed and approved battery and recharger by UMIDIGI. Incompatible battery and recharger may cause damage to the phone. Please abide by local regulation when disposing of the used batteries and phones. Please do not place the battery or the phone onto or inside heating devices such as microwave, oven or radiator. The battery may explode if it gets too hot. Please do not crush or pierce the batter. Prevent the batter from getting high pressure from outside, it may cause internal short and overheating
SPECIFICATIONS
BASIC INFORMATION
- Model G5 Mecha
- Operating System Android™ 13
- CPU T606 2xCortex-A75+6xCortex-A55 1.6GHz
- GPU Arm Mali G57 1 Cocre @650MHz
- RAM 8/4GB
- ROM 128GB
- Battery 6000mAh
- Touch ID Side Fingerprint
Display
- Screen Size 6.6 inch
- Resolution 1612×720 Pixels
- Touch Capacitive multi-touch
Cameras
- Rear Camera 50MP+2MP Camera
- Front Camera 8MP Camera
Connection(I/0)
- Band LTE FDD :B2/5/7/12
- LTE TDD: B41
- WCDMA: B2/5
- GSM :B2/5
- SIM/TF card 2 Nano SIM Card Or 1 Nano SIM and 1 TF Card
- WIEI IEEE802.11 ac/a/b/g/n
- Bluetooth Bluetooth 5.0
- GNSS GPS, Beidou, Glonass, Galileo
- FM Yes
- Earphone Port 3.5mm
- USB Port Type-C
Other Features
- Video File Format 3GP/MPEG4,etc.
- Audio File Format WAV/MP3/AAC/AMR/MIDI,etc.
- Card Extend Support TF card up to 256 GB
- Language Support Multi-language
- Sensor G-Sensor, P-Sensor, L-Sensor, Compass,
In the box
- 1x Phone
- 1× Screen Protector (pre-applied)
- 1x Type-C Cable
- 1x Power Adapter
- 1× Quick Start Guide
Amazon service Email :amazonservice@umidigi.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>