UMIDIGI ABF5X AbleBuds Free Wireless Earbuds User Manual
- June 4, 2024
- Umidigi
Table of Contents
UMIDIGI ABF5X AbleBuds Free Wireless Earbuds
OVERVIEW
Choose Eartips
Please try medium ear tips first as they fit most people.
The above pictures are for reference only and practical items may vary.
How to connect
Open lid and pick up earbuds to power them on. On phone, search for AirBuds Free and tap to connect. Power on earbuds and they will auto-reconnect to the last phone in connectivity records if any.
One Press to Turn Connectable
- Earbuds have been connected to the phone.
- Push earbuds into the case, open the case, and keep pressing the button on case for 3s or until the LED blinks white 905. Pick up earbuds again to turn them connectable.
Factory setting
Push earbuds into case, open lid and keep pressing the button on case for 10s or until LED blinks red 4 times to reset and power on earbuds.
LED for Battery Level(Open lid)
- Battery level>60%, LED will turn solid green for 10s, then off
- Battery level>20%, <60%,LED will turn solid yellow for 10s, then off
- Battery level<20%, LED will turn solid red for 10s, then off
Use Instruction
LED on Case
- Battery level >90%: LED will turn solid green when case is charging
- Battery level <90%: LED will turn solid yellow when case is charging
Function
-
Power-on: open lid, or keep touching panels for 1.5s if earbuds are out of case.
-
Power-off: Push earbuds into case and close lid
-
Answer/end call: double touch panel
-
Playback/pause:double touch left/right panel to play/pause
-
Ignore call: keep touching panel for 2s
-
Mode switch: keep touching panel for 2s to switch among ANC on, Pass-though and ANC off modes.
Download and install APP
Tips
- Before using the earbuds, please read the manual carefully and keep it for future reference.
- The earbuds need to be fully charged prior to first-time use
- If the earbuds are left unused for over two weeks, please recharge.
- Please use the chargers made by a qualified manufacturer.
- If the earbuds cannot be found by your phone, please check whether they are in pairing mode; if left unconnected for a long while, the earbuds will exit pairing mode, please re-enter the mode;if a procedure error of your phone occurs, reboot it; if a procedure error of the earbuds occurs, reboot or reset it.
Caveats
- Never disassemble or modify your earbuds for any reason to avoid any damage and danger.
- Do not store the earbuds in extreme temperatures(under 0°C or above 45°C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the earbuds during a thunderstorm to avoid dysfunction and increased risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the earbudsNote: please do not use earbuds for a long time as may damage your hearing.
FCC/ISEDC Statement
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. f this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Innovation, Science, and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.