UMIDIGI MT07 A13 Tab User Manual
- October 30, 2023
- Umidigi
Table of Contents
A13 Tab MT 07
Thanks for choosing UMIDIGI products.
www.umidigi.com
UMIDIGI MT07 A13 Tab
Thanks
Building a great tablet is hard enough, so building a great tablet on a
budget should be infinitely more difficult. Big thanks to all who made this
super tablet super awesome by contributing valuable time and developing
hardware ,software & other developments, Thanks for choosing UMIDIGI products,
thanks to your support our value can be realized and we can constantly move
forward to create smart devices with better user experience.
www.umidigi.com
Scan following QR-codes to follow us and enter giveaway to win a UMIDIGI smart
device for free!
|
---|---
https://vk.com/umidigi|
http://youtube.com/umidigi/
|
https://www.facebook.com/Umidigi|
https://twitter.com/umidigi
https://www.instagram.com/umidigi
VK: vk.com/umidigi
YouTube: youtube.com/umidigi
Facebook: facebook.com/Umidigi
Twitter: twitter.com/umidigi
Instagram: instagram.com/umidigi
UMIDIGI is registered trademark by
Shenzhen Yumi Intelligent Technology Co.,Ltd.
All other trademarks are the property of their respective owner.
Visit www.umidigi.com for more information
PRODUCT HEX-VISION IMAGE
VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.
POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen.
CARD INSERT MANUAL
Insert Nano-SIM Card
Pleases face the chip side of the Nano-SIM card adown when inserting into the
slot. Be aware of the direction of the cut edge when placing the Nano-SIM card
into the slot.
Reminder:
Please use standard Nano-SIM card .Please don’t use a nonstandard card that is
hand-cut ,in lrder to prevent the SIM slot and card tray from being damaged
and card -rejecting situating that amy cause damage to the tablet.
TF Card installation
Please place the metal contact of the TF card adown ,be aware of the direction
of the cut edge. Place the card onto the tray and insert into the device.
Reminder:
Please turn off the tablet before changing or replacing the TF card.TF card
does not come with the tablet please purchase separately.
Please do not plug in and out of the SIM card tray when the tablet is on. Be
careful when using the slot thimble from scratching the tablet.
DUAL-SIM MANAGEMENT
Please choose which SIM card slot to be the main one to be for 4G network via Setting > SIM Card . Choose your preferred network types of 4G/3G/2G via Setting > Network & internet >Mobile network >Preferred network type.
NETWORK CONNECTION
Connecting WLAN
lento the setting of WLAN via Settings > Network & internet > Wi-Fi When WLAN
is on, a list available WiFi connection will appear.
Click on the one you want to connect to, enter the password if the network is
encrypted, then click Connect .When it’s a public network, just click Connect
When the network shows “connected”, it is available to use .
Bluetooth Function
Into the setting of Bluetooth function via Settings > Connected devices >
Bluetooth Enable the Bluetooth function by clicking the Menu Button then
select “Refresh”, then the tablet will search for available Bluetooth devices
for pairing and list on the screen. Click on the one you want to pair with
,then click “Pair “on the dialog pop-up. Documents are available for
transmission after Bluetooth pairing .
Reminder :
Slide down the status bar to open the shortcut switches for Bluetooth and
other functions.
WLAN Hot-spot Setting
Click on via Settings > Network & tethering > Wi-Fi hotspot to turn on the
Portable WLAN Hot-spot functiong.
When setting up WLAN hot-spot , enter your user name in “Network Name” and
password ,then click Save .Another device password of the password.
Reminder :
Please enable the Data Connection before enabling the network sharing
function. Your mobile traffic will be shared by other devices, so please use
it carefully .The signal of the WLAN hot-spot depends on the signal strength
and devices .
CAMERA
Aim the camera at the shooting object, the tablet will start focus automatically ; or you can click on the screen to choose the object you want to focus on, then click ” Capture” icon to take photos . You can also choose other modes such as video recording ,beautifying , panorama to take photos/videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
“Dual card, dual standby, single pass” means you can insert two SIM cards and
have them both “standby “,but cannot make phone calls at the same time .During
the standby mode both cards are available for receiving phone calls , but once
one of the cards is activated, the other one cannot receive phone calls nor
make phone calls.
SECURITY INFORMATION
Security information (including BS, ES, battery security information)of third-
party software installation and function may vary in different regions or by
different hardware specifications.
UMIDIGI holds disclaimer for the performance problem or incompatibility caused
by third-party applications, registry editing ,OS software modifying
.Customizing the OS may cause the device or some applications fail to work
properly.
Please prevent the device or the battery in extreme cold/hot condition. Then
extreme temperature will lead to deformation of the tablet and reduce the
charging capacity and battery life.
Please only use the custom designed and approved battery and recharger by
UMIDIGI.lncompatible battery and recharger may cause damage to the tablet .
Please abide by local regulation when disposing of the used batteries and
tablet.
Please do not place the battery or the tablet onto or inside heating devices
such as microwave, oven or radiator. The battery may explode if it gets too
hot.
Please do not crush or pierce the battery . Prevent the battery from getting
high pressure from outside , it may cause internal short and overheating .
SPECIFICATIONS
BASIC INFORMATION
Model | A13 Tab |
---|---|
Operating System | Android™ 13 |
CPU | T616 2 x A75@2.0GHz + 6 x A55@1.8GHz |
GPU | Arm Mali G57 1Cocre @750MHz |
RAM | 6GB/8GB |
ROM | 128GB/256GB |
Battery | 7500mAh |
Display
Screen Size | 10.5 inch |
---|---|
Resolution | 1920*1200 Pixels |
Touch | Capacitive multi-touch |
Cameras
Rear Camera | 13MP+5MP Camera |
---|---|
Front Camera | 8MP Camera |
Connection(I/O)
Band| GSM:B2/5
WCDMA :B2/5
FDD:B2/5/7/12
TDD:B41F (2535-2655)
---|---
SIM/TF card| 2 Nano SIM Card Or 1 Nano SIM Card and 1 TF Card
WiFi| IEEE802.11 a/b/g/n/ac
Bluetooth| Bluetooth 5.0
GNSS| GPS/Glonass/Galileo/Beidou
FM| YES
Earphone Port| 3.5mm
USB Port| Type-C USB
Other Features
Video File Format | 3GP/MPEG4,etc |
---|---|
Audio File Format | WAV/MP3/AAC/AMR/MIDI/APE/WMA, etc. |
Card Extend | Support TF card up to 512 GB |
Language | Support Multi-language |
Sensor | G-Sensor, Compass. |
In the box
1tablet
1Type-c Cable
1 Power Adapter
1Quick Start Guide
1*Phone case
Safety Statement
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISEDC Warning
Operation of 5150-5250 MHz is restricted to indoor use only. This device
complies with Innovation, Science, and Economic
Development Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
BE | BG | CZ | DK | DE | EE | IE | EL |
---|---|---|---|---|---|---|---|
ES | FR | HR | IT | CY | LV | LT | LU |
HU | MT | NL | AT | PL | PT | RO | SI |
SK Fl | SE | NO | IS | _ LI | _CH | TR |
In all EU member states, operation of 5150-5250 Lm is restricted to indoor use only.
Follow UMIDIGI community. A place where you can share and discuss with UMIDIGI user keep posted with the most up-to-day news.
Google™ app and Google Chrome™ pre-installed
Android is a trademark of Google LLC.
Manufacturer: Shenzhen Yumi Intelligent Technology Co.,Ltd.
Add:406-407 Jingi Zhigu Building,4/F,1 Tangling Road,Nanshan District,
Shenzhen City, China.
Amazon service Email :
amazonservice@umidigi.com
Made in China
Documents / Resources
|
UMIDIGI MT07 A13
Tab
[pdf] User Manual
2ATZ4-A3TAB, 2ATZ4A3TAB, MT07 A13 Tab, MT07, MT07 Tab, A13 Tab, Tab
---|---
References
- card.tf
- UMIDIGI Smartphones, Smart Wearables | Official Website - UMIDIGI
- UMIDIGI Smartphones, Smart Wearables | Official Website - UMIDIGI
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>