UMIDIGI Power 5 Smartphone User Guide

UMIDIGI Power 5 Smartphone

Thanks
Building a great phone is hard enough, so building a great phone on a budget should be infinitely more difficult. Big thanks to all who made this superphone super awesome by contributing valu- able time and developing hardware, software & other developments. Thanks for choosing UMIDIGI products, thanks to your support our value can be realized and we can constantly move forward to create smart devices with better user experience.
www.umidigi.comn

Scan the following QR codes to follow us and enter the giveaway to win a UMIDIGI smart device for free!

• VK: vk.com/umidigi
• YouTube: youtube.com/umidigi
• Facebook: facebook.com/Umidigi
• Twitter: twitter.com/umidigi
• Instagram: instagram.com/umidigi

UMIDIGI is a registered trademark by Shenzhen Youmi Intelligent Technology Co., Ltd. All other trademarks are the property of their respective owner.

Visit www.umidigi.com for more information

PRODUCT HEX-ViSION IMAGE

POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the Screen.

VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.

CARD INSERT MANUAL

Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card down when inserting into the slot. Be aware of the direction of the cut edge when placing the Nano-sIM card into the slot.
Reminder:
Please use a standard Nano-SIM card. Please don’t use a non- standard card that is hand-cut, in order to prevent the SIM slot and card tray from being damaged and the card-rejection situation that may cause damage to the phone.

TF Card Installation
Please place the metal contact of the TF card adown, be aware o the direction of the cut edge. Place the card onto the tray and insert into the device.
Reminder:
Please turn off the phone before changing or replacing the TF card.TF card does not come with the phone, please purchase separately. Please do not plug in and out of the SIM card tray when the phone is on. Be careful when using the slot thimble from scratching the phone.

DUAL-SIM MANAGEMENT

Please choose which SIM card slot to be the main one to be for the 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3G/2G via Setting> Network&Internet> Mobile network >Preferred network type

FINGERPRINT IDENTIFICATION

You can unlock the screen by the fingerprint ID function. Click Setting> Security8&Location> Fingerprint, fingerprint information by following the instructions on the please enter your Screen.
Reminder:
Please ensure your finger clean and dry when giving your fingerprint information to the phone. Please enter the information of your finger pulp for fingerprint information. When unlocking the phone by fingerprint, please place your finger pulp on the touch ID sensor for about a second.

NETWORK CONNECTION

Connecting WLAN
Into the setting of WLAN via Settings> Network&Internet> Wi-Fi When WLAN is on, a list of available WiFi connections will appear Click on the one you want to connect to, enter the password if the network is encrypted, then click Connect. When it’s a public network, just click Connect When the network shows “Connected”, it is available to use.
Bluetooth Function
Into the setting of Bluetooth function via Settings>Connected devices> Bluetooth Enable the Bluetooth function by clicking the Menu Button then select “Refresh”, then the phone will search for available Bluetooth devices for pairing and list on the screen. Click on the one you want to pair with, then click Pair on the dialog pop-up. Documents are available for transmission after Bluetooth pairing.
Reminder:
Slide down the status bar twice to open the shortcut switches for Bluetooth and other functions. WLAN Hot-spot Setting Click on via Settings>Network&Internet>Hotspot&tethering >Wi-Fi hotspot to turn on the Portable WLAN Hot-spot function. When setting up the WLAN hot-spot, enter your user name in “Network Name” and password, then click Save. Another device can use the WLAN hot-spot by searching and entering the password of the password.
Reminder:
Please enable the Data Connection before enabling the network sharing function. Your mobile traffic will be shared by other devices, So please use it carefully. The signal of the WLAN hot-spot depends on the signal strength and devices.

CAMERA
Aim the camera at the shooting object, the phone will start focus automatically; or you can click on the screen to choose the object you want to focus on, then click the “Capture” icon to take photos. You can also choose other modes such as video recording beautifying, and panorama to take photos/videos.

INSTRUCTIONS FOR DUAL-CARD STANDBY

“Dual card, dual standby, single pass” means you can insert two SIM cards and have them both “standby”, but cannot make phone calls at the same time. During the standby mode both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls nor make phone calls.

SECURITY INFORMATION

Security information (including BS, ES, and battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. UMIDIGI holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, and OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly. Please prevent the device or the battery in extreme cold/hot conditions. The extreme temperature will lead to the deformation of the phone and reduce the charging capacity and battery life. Please only use the custom-designed and approved battery and recharger by UMIDIGI. An incompatible battery and recharger may cause damage to the phone. Please abide by local regulations when disposing of used batteries and phones. Please do not place the battery or the phone onto or inside heating devices such as microwaves, ovens or radiators. The battery may explode if it gets too hot. Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside, it may cause internal short and overheat.

SPECIFICATIONS

BASIC INFORMATION

• Model Power 5
• Operating system Android™ 11
• CPU MTK,Helio,G25, 8x ARM Cortex-A53 up to 2GHz ,
• GPU IMG PowerVR GE8320 up to 650MHz
• RAM 3GB
• ROM 64GB
• Battery 6150mAh
• Touch ID Side-mounted Fingerprint sensor

Display

• Screen Size 6.53 inch
• Resolution 720*1600 pixels
• Touch Capacitive multi-touch

Cameras

• Rear Camera 16MP+8MP+5MP Camera
• Front Camera 8MP Camera

Connection(I/O)

• Band LTE FDD:B1/2/3/4/5/7/8/12/13/17/18/19/20/26/28A/28B/B66
  • LTE TDD: B34/38/39/40/41
  • TD-SCDMA: B34/39
  • WCDMA: B1/2/4/5/6/8/19
• SIM/TF card GSM:B2/3/5/8
• WIFI 2 Nano SIM Card and 1 TF Card
• Bluetooth Bluetooth 5.0
• GPS Build in GPS/Glonass/Beidou
• FM Yes
• Earphone Port 3.5mm
• USB Port Type-CUSB

Other Features

• Video File Format 3GP/AVI/MP4
• Audio File Format MP3/M4A/FLACIAPE/WAV/MID/OGG
• Card Extend Support TF card up to 64GB
• Language Support Multi-language
• Sensor Support Multi-language

In the box

• Phone x1
• Type-C cable x1
• Power Adapter x1
• User Menu x1
• phone case x1

Google™ app and Google Chrome™ pre-installed Android is a trademarks of Google LLC.

Safety Statement

FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is Connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISEDC Warning
Operation of 5150-5250 MHz is restricted to indoor use only. This device complies with the Innovation, Science, and Economic  Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause into
2. this device must accept any interference, including interference that may cause undesired rence, and

Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC/iSEDC with the phone transmitting at its highest certified power level in al tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Before a new model phone is a available for sale to the public, it must be tested and certified to the FCC/ISEDC that it does not exceed the exposure limit established by the FCC/ISEDC, tests for each phone are performed in positions and locations as required by th
FCC/ISEDC.
For body-worn operation, this model phone has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the body. Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.

In all EU member states, the operation of 5150-5250 MHZ IS restricted to indoor use only

Follow the UMIDIGI community.a place where you can share and discuss with UMIDIGI users keep posted with the most up-to-day news.

Manufacturer: Shenzhen Youmi Intelligent Technology Co., Ltd. Add:406-407 Jinqi Zhigu Building,4/F,1 Tangling Road, Nanshan District, Shenzhen City,China Google TM app and Google Chrome TM pre-installed Android is a trademark of Google LLC.
Amazon service Email
amazonservice@umidigi.com.

References

• UMIDIGI Smartphones, Smart Wearables | Official Website - UMIDIGI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>