UMIDIGI G6 Smartphone User Guide

UMIDIGI G6 Smartphone User Guide

This guide will show you how to use the phone and its important functions. You may also visit UMIDIGI’s official website to get more information about the phone.

Warning

• Security information (including BS, ES, and battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications.
  UMIDIGI holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, and OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly

• Do not place the phone or battery near or inside heating equipment, cooking equipment, or high-ressure vessels (such as microwave ovens, induction cookers, electric ovens, heaters, pressure cookers, water heaters, gas stoves, etc.) to prevent the battery from overheating which may lead to an explosion.

• The original charger, data cable, and battery shall be used. Unapproved chargers, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards.

• When charging, please place the device in an environment that has a normal room temperature and good ventilation, it is recommended to charge the device in an environment with a temperature ranging from 5°C~35°C.

• The back cover can’t be removed.

How to Restart the Phone

Press the Power Button for a few seconds until the UMIDIGI restart animation is displayed to restart the phone.

How to Transfer Old Mobile Content to a New Mobile

You can use UMIDIGI Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one in the following three approaches.

Google Account Backup and Restore

1. Ensure that both phones are connected to Wi-Fi and have your Google account signed in.
2. On the old phone, go to “Settings” > “System” > “Backup” and ensure that “Back up to Google Drive” is enabled. Back up your data.
3. On the new phone, sign in with the same Google account during setup. Your apps, contacts, calendar events, and some other settings should automatically sync and restore.

Transfer Cable

You can use a USB-C transfer cable to directly connect the old and new phones and transfer data.

Specification

IMG PowerVR GE8320
Memory| 4+4GB Extended RAM128GB ROM, 1TB TF Expansion
Battery & Charging| 5000mAh 10W Charging
Rear Camera| Main Camera Infrared Rear Camera
Front Camera| Infared Front Camera Front Camera
NEC| Support Google Pay
Hotkey| Yes
Security & Authentication| Al Face Unlock & Side Fingerprint Sensor
SIM Card & TF Card| SIM1 + Hybrid(SIM2 or MicroSD)
Operating System| Android”‘ 13
In the Box|

• lx UMIDIGI G6
• lx Protector Film (applied)
• lx Phone Case
• lx Power Adapter
• lx SIM Tray Ejector
• lx USB Type-C to Type- C Cable lx Quick Start Guide

Thanks for choosing UMIDIGI products!
We will always focus on innovation and continue to provide high-quality smart devices for a better user experience. Please leave us a review of feedback if you like it. We do appreciate it.

Follow UMIDIGI:

YouTube: youtube.com/umidigi

VK: vk.com/umidigi

Facebook: facebook.com/umidigi

Twitter: twitter.com/umidigi

Instagram: instagram.com/umidigi

Safety Statement FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules

These limits are designed to provide reasonable protection against harmful interference in a residential  installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISEDC Warning

Operation of 5150-5250 MHz is restricted to indoor use only.
This device complies with lnnovation, Science, and Economic Development Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device

Specific Absorption Rate(SAR) information

SAR tests are conducted using standard operating positions accepted by the FCC/ISED with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC/ISED that it does not exceed the exposure limit established by the FCC/ISED, tests for each phone are performed in positions and locations as required by the FCC/ISED.

For body-worn operation, this model phone has been tested and meets the FCC/ISED RF exposureguidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the body.
Non-compliance with the above restrictions may result in a violation of RF exposure guidelines

The E-label information
To access the e-label information, in the device,
Choose: Settings > About phone > Authentication information

EU Regulatory Information:

In all EU member states, the operation of 5150-5250MHz is restricted to indoor use only.

Manufacturer:
Shenzhen Youmi lntelligent Technology Co., Ltd

Add:
406-407 Jinqi Zhigu Building,4/F, 1 Tangling Road, Nanshan District, Shenzhen City, Guangdong Province China

References

• Login • Instagram
• VK.com | VK

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>