UMIDIGI F3 Smart Phone User Manual
- June 5, 2024
- Umidigi
Table of Contents
UMIDIGI F3 Smart Phone
Building a great phone is hard enough, so building a great phone on a budget
should be infinitely more difficult. Big thanks to all who made this
superphone super awesome by contributing valu- able time and developing
hardware, software & other developments. Thanks for choosing UMIDIGI products,
thanks to your support our value can be realized and we can constantly move
forward to create smart devices with better user experience.Scan following QR-
codes to follow us and enter giveaway to win a UMIDIGI smart device for free!
PRODUCT HEX VISION IMAGE
POWER BUTTON
Long press to turn on the device; When the device is on, short press Power
Button to shutdown or turn en the screen.
VOLUIIE BUTTON:
Short press to adjust the volume orto mute incoming calls.
CARD INSERT MANUAL
Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card adown when Inserting Into the
slot. Be aware of the direction of the cut edge when placing the Nano-SIM card
into the slot.
Reminder:
Please use standard Nano-SIM card. Please don’t use a nonstandardcard that Is
hand-cut, In order to prevent the SIM slot and card tray from being damaged
and card-rejection situation that may cause damage to the phone.
TF Card lnstallatlon
Please place the metal contact of the TF card adown, be aware of the direction
of the cut edge. Place the card onto the tray and insert into the device.
Reminder:
Please turn off the phone before changing or replacing the TF ca rel. TF card
does not come with the phone, please purchase separately. Please do not plug
In and out of the SIM card tray when the phone is on. Be careful when using
the slot thimble from scratching the phone.
DUAL-SIM MANAGEMENT
Please choose which SIM card slot to be the main one to be for 4G network
via Setting> SIM Card. Choose your preferred network
FINGERPRINT IDENTIFICATION
You can unlock the screen by the fingerprint ID function. Click Setting>Security&Location>Fingerprint. please enter your lnt Information by following the In structlons on the
Reminder:
Please ensure your finger clean and dry when giving your fingerprint
information to the phone. Please enter the information of your finger pulp for
fingerprint information. When unlocking the phone by fingerprint, please place
your finger pulp on the touch ID sensor for about a second
Connecting WLAN
Into the setting ofWLAN via Settlngs>Network&.lntemet>WI-FI When WLAN is on,a
list available WiFi connection will appear. Click on the one you want to
connect to, enter the password if the network isencrypted, then click Connect.
When it’s a public network, justcllck Connect When the network shows
“connected”, It Is available to use
Bluetooth Function
Into the setting of Bluetooth function via Settlngs>Connected
devlces>Bluetooth Enable the Bluetooth function by cllcklng the Menu Button
then select “Refresh”, then the phone will search for available Bluetooth
devices for pairing and list on
the screen. CIiek on the one you want to pair with, then ell ck “Pair”on the
dialog pop-up.Documents are available for transmission after Bluetooth
pairing.
Reminder:
Slide down the status bar twice to open the shortcut switches for Bluetooth
and other functions.
WLAN Hot-apot Setting
CIiek on via Settinga>Network&lnternet>Hotspot&tethering WI-Fl hotspot to turn
on the Portable WLAN Hot-spot function. When setting up WLAN hot-spot,
enteryouruser name in “Network Name” and password, then cllck Save. Another
device can use the WLAN hot-spot by searching and entering the password of the
password.
Reminder:
Please enable the Data Connection before enabling the network sharing
function. Your mobile traffic will be shared by other devices, so please use
it carefully. The signal of the WLAN hot-spot depends on the slgnal strength
and devices
CAMERA
Aim the camera at the shooting object, the phone will start focus automatically; or you can click on the screen to choose the object you want to focus on, then click “Capture” icon to take photos. You can also choose other modes such as video recording, beautifying, panorama to take photos/videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
“Dual card, dual standby, single pass” means you can insert two SIM cards
and have them both “standby”, but cannot make phone calls at the same time.
During the standby mode both cards are available for receiving phone calls,
but once one of the cards is activated, the other one cannot receive phone
calls nor make phone calls.
SECURITY INFORMATION
Security information {including BS, ES, and battery security information)
of third-party software installation and function may vary in different
regions or by different hardware specifications. UMIDIGI holds a disclaimer
for the performance problem or incompatibility caused by third-party
applications, registry editing, OS software modification. Customizing the OS
may cause the device or some applications to fail to work properly. Please
prevent the device or the battery in extreme cold/hot conditions. The extreme
temperature will lead to the deformation of the phone and reduce the charging
capacity and battery life. Please only use the custom-designed and approved
battery and recharger by UMIDIGI. An incompatible battery and recharger may
cause damage to the phone. Please abide by local regulations when disposing of
the used batteries and phones. Please do not place the battery or the phone
onto or inside heating devices such as microwaves, ovens or radiators. The
battery may explode if it gets too hot. Please do not crush or pierce the
battery. Prevent the battery from getting high pressure from outside, it may
cause internal short and overheat
SPECIFICATIONS
- 1x Phone
- 1x Screen Protector (pre-applied)
- 1x Phone Case
- 1x Type-C Cable
- 1x Power Adapter
- 1x SIM Tray Ejector
- 1x Quick Start Guide
Android is a trademark of Google LLC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>