PureGear pureboom Bubble Wireless Speaker User Manual
- July 8, 2024
- PURegeaR
Table of Contents
PureGear pureboom Bubble Wireless Speaker
Product Information
Specifications
- Product Name: PureBoom Bubble Wireless Speaker
- Bluetooth Version: 4.2
- Connectivity: Bluetooth, Aux
- Additional Feature: Pairing 2 Speakers
Product Usage Instructions
Connecting / Bluetooth Pairing
- Ensure the PureBoom Bubble is in Bluetooth mode or Aux mode.
- Press the Bluetooth pairing button to activate pairing mode.
- On your device, enable Bluetooth and search for available devices.
- Select “PureBoom Bubble” from the list of available devices to pair.
Operating the PureBoom Bubble Wireless Speaker
- To play/pause music: Press the play/pause button once.
- To adjust volume: Use the volume buttons located on the speaker.
- To answer/end calls: Press the call button.
- To redial the last number: Double-click the call button.
Pairing 2 Speakers
- Ensure both speakers are in pairing mode.
- Follow the Bluetooth pairing steps mentioned above for each speaker.
- Once paired, you can enjoy synchronized audio playback from both speakers.
FAQ
Q: What should I do if the device causes interference?
A: If the device causes harmful interference to radio or television
reception, try turning it off and on to correct the issue. For further
assistance, visit pure-gear.com.
Bubble Wireless Speaker Altavoz inalámbrico Bubble
User Manual Manual del usuario
Connecting / Bluetooth Pairing
- Make sure the PureBoom Bubble Wireless Speaker is within 2-3 ft (0.6-0.9m) of the device you will be connecting to.
- Press and hold the power button to power on the speaker.
- Turn on your device’s Bluetooth. Most devices will automatically detect your speaker. Locate and select “PureBoom Bubble”. The flashing white LED will turn steady indicating your speaker is now connected or paired.
If your device does not automatically detect your speaker, make sure Bluetooth is turned on, do a SEARCH for “PureBoom Bubble” and then click CONNECT.
Operating the PureBoom Bubble Wireless Speaker
When playing music
To pause/play, press the button.
- To play previous track, press and hold the – button.
- To play next track, press and hold the + button.
- To decrease the volume, press the – button.
- To increase the volume, press the + button.
- Press the M button to switch between Bluetooth and Aux mode.
When on a call:
To answer a call, press the button, double-click to call back.
To reject an incoming call, press and hold the button.
Pairing 2 Speakers
- Make sure both speakers are not connected to your phone/device’s Bluetooth.
- Turn on both speakers. Speakers will prompt “Bluetooth Mode”.
- Press and hold the button on one of the speakers. You will hear a tone confirming the connection is complete.
- Once connected you will see a flashing white light on the primary speaker and a steady white light on the paired speaker.
Activating Siri®
- Press the power button to activate Siri (iOS ).
Features and Specifications
- Frequency response: 85Hz-20KHz
- Charging Input: 5V/1A
- Li-ion battery size: 800mAh
- Impedance: 4Ω
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
pure-gear.com
©2024 | F00223PG | 64951PG | 64952PG
Siri is a trademark of Apple Inc., registered in the U.S. and other countries
and regions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>