UMIDIGI Urun S Smartwatch Fitness Instruction Manual
- October 27, 2023
- Umidigi
Table of Contents
- THANKS FOR CHOOSING UMIDIGI
- Key definition
- Bind Watch
- Synchronous Data
- Main interface operation
- Function Introduction
- Start sports
- Heart rate test
- Product Parameters
- Cleaning and Maintenance
- Frequently Asked
- Safety and Product Information Notes
- Safety and Product Information Notes
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
UMIDIGI Urun S Smartwatch Fitness
Please read the instructions carefully and keep it safe.
THANKS FOR CHOOSING UMIDIGI
Thanks
Thanks for choosing UMIDIGI products! We will always focus on innovation and continue to provide high quality smart devices for better user experience.
Please leave us review of feedback if you like it, we do appreciate.
Follow UMIDIGI:
YouTube:
youtube.com/umidigi.|
Facebook: facebook.com/umidigi.
---|---
Twitter:
twitter.com/umidigi.|
Instagram: instagram.com/umidigi.
UMIDIGI is registered trademark by Shenzhen Youmi Intelligent Technology Co.,
Ltd. All other trademarks are the property of their res pective owner.
Visit www.umidigi.com for more
information
Key definition
Instruction for Use
Charging schematic
Connect and charge the watch according to the picture. It needs to be charged to activate the watch when it is started for the first time.
Wear/Install Wear
Wear the device a inger’s distance froam the wrist bone and adjust the tightness of the wristband to a comfortable position.
Flp the switch and take out the wristband.
Tip: Wearing too loosely may affect the accuracy of heart rate data.
Bind Watch
Download and install App
You can set up the watch through the Paiactive app for iOS or Android devices. The steps are shown as follows: Notes: The hardware platform of the equipment system shall meet requirements.
| IOS 8.0 version or
above
---|---
|
IOS 8.0 version or above
Correct operation:
Scan the QR code below or download the Paiactive app with watch through the
mobile app store.
Wrong operation:
Pair the watch directly with the Bluetooth in your mobile phone’s settings.
Bind Watch
①Please charge to activate the watch before you use it.
② In the watch, enter the Settings about watch View Bluetooth address
③Turn on the Bluetooth on your mobile phone
④Open “Paiactive”APP, register, add device.
⑤Select product model: Urun S
⑥Click the next step
⑦Select watch Bluetooth address
⑧Show successful addition
⑨Click to view now to enter the operation interface
Synchronous Data
The data is synchronized in real time. and the sports mode can save a biece of
sports information shown as follows:
Main interface operation
Function Introduction
Enter the sports menu, you can choose different sports mode
| Record the most recent exercise data|
Current status; Number of steps, distance, heat.
---|---|---
A single heart rate measurement that monitors your heart rate data. The APP has a continuous heart rate measurement switch.
|
Monitor sleep quality
|
Monitoring blood oxygen levels.
Timer function
|
Control music play on your mobile phone (watch cannot store music)
|
For information prompt, set it in the APP inadvance to display synchronously.
Real-time display of weather and temperature in the area
|
The alarm function only supports setting time on the App
|
Turn on the flashlight, the screen can be used as a backup light source.
As long as the watch is in normal connection with the mobile phone, the alarm will ring even if the mobile phone is in silent state.
|
Before using the compass, azimuth calibration of the algorithm should be carried out to ensure accuracy.
|
After connecting the device can remote contral the camera on your phone
Countdown function.
|
Set the function
|
Notes: For more functions and operation, please check the Paiactive software of the mobile phone.
Start sports
➀ Enter sports
Click the sports icon select the sports type > enter the sports automatic
timing
➁ **During sports
Pause motion: Long press the key, prompt pause/restore, click Restore
Exercise: Click to resume exercise
➂ Stopexercise:** Remind whether to end this exercise Select Yes
Heart rate test
Note: Please wear the strap tightly to test accurately when testing heart rate.
Product Parameters
Model | Urun S | Screen type | 1.1-inch color screen |
---|---|---|---|
Battery capacity | 280mAh | Charging voltage | 5V±0. 2V |
Charging time | about 2.5 hours | Battery life | 7-15days |
Waterproof level | 5ATM | Weight of product | 43.6g |
Operating temperature | -20℃- 45℃ | Bluetooth version | BLE 5.0 |
GPS | NO | sensor | Accelerator sensor Geomagnetic sensor Optical heart rate |
sensor
Range of charging temperature: 10℃-45℃
Battery life: Actual battery life and charging time will vary depending
on usage and environment, etc.
Waterproof: Not suitable for diving, swimming in the sea, or sauna. But
suitable for swimming in swimming pool or in shower (cold water) and shallow
beach.
Cleaning and Maintenance
It is recommended to wear and maintain according to the following three points:
➀ Keep the product clean;
➁ Keep the product dry;
➂ Do not wear it too tight.
- Do not use household cleaners to clean the watch, but use the soap free detergent.
- It is recommended to use alcohol to scrub stains that are not easy to remove.
Frequently Asked
-
Mobile APP search for the watch failed
➀ It is recommended to restart Bluetooth after restarting the phone, and then connect.
➁ Confirm whether the mobile phone system meets Android 4.4 or iOS 8.0 or above. -
The watch received no alerts, text messages
➀ You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch.
➁ The phone needs to be paired with the watch via Bluetooth.
➂ You need to keep your watch connected to Bluetooth.
Note: The watch information prompt and caller ID are not supported by Android phones. iOS system mobile phone support. -
Bluetooth is often disconnected
➀ If the distance between the watch and the mobile phone is too far, the connection effect of more than 10m bluetooth is obviously weakened.
➁ Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc., will interfere with the bluetooth connection signal.
➂ Whether the bluetooth function of the mobile phone is abnormal. -
How to restart: Restart mode: long press the key, prompt whether to restart/shut down, select restart
-
Do I need to keep my bluetooth on when I wear my watch?
➀ For the three functions, i.e. counting steps, sleeping and alarm clock, you do not need to connect the watch to the mobile phone all the time. If you only need to wear a watch when you exercise, you can connect the watch and your mobile phone to view the data synchronously after the exercise.
➁ For the functions of call alert, message alert, find the phone, you need to turn on the mobile phone’s bluetooth, and maintain the connection with the mobile phone. -
How to set the watch time After opening the APP, opening the Bluetooth and connecting the watch, the time will be automatically synchronized.
More deatiled questions can be answered with help and feedback in the APP.
Safety and Product Information Notes
Battery warhing Do not disassemble, bore or damage the battery. Do not disassemble the built-in batteries of non-replaceable battery devices. Do not use sharp objects to remove the battery.
Health Warning
If you are wearing a pacemaker or other implanted electronic devices, please
consult your doctor before using the heart rate monitoring strap.
The optical heart rate sensor of the watch glows green and blinks. If you have epilepsy or are sensitive to flashing light sources, please consult your doctor if you can wear this product.
The device tracks your daily activities through sensors. These data are intended to tell you about your daily activities. such as steps, sleep, distance, heart rate and calories, but may not be completely accurate.
The device, accessories, heart rate sensors and other relevant data are designed for entertainment and fitness, not for medical purposes. They are not applicable to the diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The heart rate data is for reference only. We are not responsible for any consequences caused by any data deviation.
Safety and Product Information Notes
Cycling Warming
Please maintain good judgment at all times and ride in a safe manner. Make
sure your bike and hardware are properly maintained,.The watch has no
waterproof effect on seawater, acidic and alkaline solutions, chemical
reagents and other corrosive liquid. The damage or defects caused by misuse or
improper use are not covered by the warranty.Avoid wearing the watch too tight
indaily use. Please keep the parts of the watch touching the skin dryWhen your
heart rate is measured, keep your arm still during the test.
Caution Rise of explosion if battery is replaced by an incorrect type dispose of used batteries according to the instructions.
The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive 2011/65/EU and revised directive.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, inchuding interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.However,
there is no guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
References
- UMIDIGI (@umidigi) • Instagram photos and videos
- UMIDIGI Smartphones, Smart Wearables | Official Website - UMIDIGI
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>