TRANSFORMERS TF-T63 Headphones with Hanging Ears Instruction Manual

TRANSFORMERS TF-T63 Headphones with Hanging Ears

Packing list

Product diagram

Tips

1. Except for the operation methods specifically marked in the manual, please do not try to disassemble or replace any parts in the earbuds.
2. Don’t put the earbuds in the water or any others liquid. The earbuds are not waterproof.
3. If any liquid enters the product by accidentally, please disconnect and remove the connection immediately.
4. Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electricshock.
5. Do not put the product near by the heat source or expose it to the fire source directly.
6. Do not put the product in the environment with strong electromagnetic force, otherwise it will cause product malfunction.

Product specification

• BT version: V5.4
• Transmission distance: ≥10m
• Speaker unit: 13mm 16
• sensitivity : 123÷3dB
• Frequency response range : 20-20kHz
• Music playing time: = 5hours
• C harging time (headphones): ~ 1.5 hours
• Charging time (charging case) : ~1.5 hours
• Battery capacity (charging case): 300 mAh
• Battery capacity (headset): 50mAh
• Rated current (headset): 50mA
• Rated current (charging box): 300mA

Product operation instructions

Power on:

Method 1. Remove the headphones from the charging bay. The headset turns on automatically.
Method 2. Long press the left/right multifunction key for 3 seconds, Keep the white light on for 1 second. (Voice prompt tone: “power

Shutdown:

Method 1: Replace the charging box, and the headphones will automatically turn off.
Method 2. The headphones are not connected within 3 minutes The device automatically shuts down. (Voice prompt tone: “power off”)

Bluetooth pairing:

1. Remove the headphones from the charging compartment, and the left and right headphones will automatically enter Bluetooth pairing mode, waiting for connection. (Voice prompt tone: “pairing”).
2. Open Bluetooth on your phone, search for the device name “TF-T63”, and click to enter the connection. (Voice prompt tone: “connected”)

Wearing method

1. Hold the ear with one hand and hang the earphones over your ears.
2. Rotate and adjust the horn position of the earphone, moving it up and down until the earphone completely fits the outline of the ear.
3. Pay attention to distinguish the wearing position of L/R, if it is reversed, it cannot be worn up.

LED indicator status

Touch Operation

Restore factory settings

1. If the earphone is not connected to the device after being powered on, click any earphone touch button five times to restore factory Settings.
2. When the headset is connected to the device, click the touch key of any headset five times, hold down the touch key of any headset for 10 seconds within 3 seconds, restore the factory Settings, and shut down the device.

Warranty Statement

Disclaimer
This user manual does not have any form of guarantee, position expression or other implication. The mentioned products, specifications and information are for reference only, and the content will also be updated on the web at any time without additional separate notice

Warranty Statement
The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase (“Warranty Period”), under normal conditions of use due to quality defects damaged, can be repaired. Free repair; free replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced product. Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchased by sale the ticket date shall prevail; if the purchase date cannot be determined, the warranty period shall be 13 (13) months If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us. When applying for warranty, you need to provide an accurate, complete and clearly filled out valid sales invoice.

The above guarantee does not apply to the following situations:

1. Exceeding the validity period of the three packs;
2. Altering the warranty card and product code does not match the product body;
3. Causes caused by misuse, abuse or improper transportation, use, maintenance or storage obstacles or damage;
4. Failure or damage caused by force majeure (such as earthquake, war, disaster, etc.) or accident bad;
5. The zipper and tower buckle are damaged due to excessive force;
6. Disconnection or tearing caused by excessive load;
7. Any damage caused by sharp objects;
8. Products with signs of burning of flooding;
9. Damage caused by unauthorized disassembly;
10. Aging, discoloration, abrasion, rupture and other losses that occur during the normal use of the product.
11. If the original identification label of the product is changed or damaged, this guarantee will become invalid.

The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies.
The above guarantees are all guarantees we make regarding the products, and are only applicable in mainland China. Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.

Service supervision hotline: 400-885-8808

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.

However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>