TRANSFORMERS TF-T07 Headphones with Hanging Ears Instruction Manual

TRANSFORMERS TF-T07 Headphones with Hanging Ears

Packing list

Product diagram

Tips

1. Except for the operation methods specifically marked in the manual, please do not try to disassemble or replace any parts in the earbuds.
2. Don’t put the earbuds in the water or any other liquid. The earbuds are not waterproof.
3. If any liquid enters the product by accidentally, please disconnect and remove the connection immediately.
4. Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electricshock.
5. Do not put the product near by the heat source or expose it to the fire source directly.
6. Do not put the product in an environment with strong electromagnetic force, otherwise, it will cause product malfunction.

Product specification

• BT version: V5.4
• Transmission distance: 10m
• Speaker unit: ∅14.2mm 160
• sensitivity: 118+3dB @1kHz
• Frequency response range: 20-20kHz
• rated power: 10mW
• Music playing time: ~ 4.5 hours
• Charging time (headphones): 1.5 hours
• Charging time (charging case): 1.5 hours
• Battery capacity (charging case): 300mAh
• Battery capacity (headset): 40mAh
• Number of charges available for headphones: ~ 3 times

Product operation instructions

Power on
Method 1. Remove the headphones from the charging compartment and the headphones will automatically turn on. Method 2. Press and hold the left/right multifunction button for 3 seconds, The blue light is on for 1 second, and the headphones are turned on. (Voice prompt tone: “power

Shutdown:
Method 1: Replace the charging box, and the headphones will automatically turn off. Method 2. The headphones are not connected within 3 minutes The device automatically shuts down. (Voice prompt tone: “power off”)

Bluetooth pairing:

1. Remove the headphones from the charging compartment, and the left and right headphones will automatically enter Bluetooth pairing mode, waiting for a connection. (Voice prompt tone: “pairing”)
2. Open Bluetooth on your phone, search for the device name “TF-TO7”, and click to enter the connection. (Voice prompt tone: “connected”)

Wearing method

1. Hold the ear with one hand and hang the earphones over your ears.
2. Rotate and adjust the horn position of the earphone, moving it up and down until the earphone completely fits the outline of the ear.
3. Pay attention to distinguish the wearing position of L/R, if it is reversed, it cannot be worn up.

LED indicator status

Touch operation

Restore factory settings

1. If the headset is not connected to the device after being powered on, click any headset function key five times to restore the factory Settings and shut down the headset.
2. When the headset is connected to the device, click any headset function key five times, and hold down any headset function key for 10 seconds within 3 seconds. After restoring factory Settings, power off the device.

The name and content of harmful substances in the earbuds

Warranty Statement

Disclaimer
This user manual does not have any form of guarantee, position expression or other implication. The mentioned products, specifications and information are for reference only, and the content will also be updated on the web at any time without additional separate notice

Warranty statement
The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase( “Warranty Period”), under normal conditions of use due to quality defects damage can be repaired. Free repair; free replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced the product. Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchased by sale the ticket date shall prevail; it the purchase date cannot be determined, the warranty period shall be 13 (13) months If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us. When applying for a warranty, you need to provide an accurate, complete and filled-out valid sales invoice. The above guarantee does not apply to the following situations:

1. Exceeding the validity period of the three packs;
2. Altering the warranty card and product code does not match the product body;
3. Causes caused by misuse, abuse or improper transportation, use, maintenance or storiure or damage caused by force majeure (such as earthquake, war, disaster etc. or accident bad;
4. The zipper and tower buckle are damaged due to excessive force; Disconnection or tearing caused by excessive load; /Any damage caused by sharp objects;
5. Products with signs of burning or flooding;
6. Damage caused by unauthorized disassembly;
7. Aging, discolouration, abrasion, rupture and other losses that occur during the normal use of the product.
8. If the original identification label of the product is changed or damaged, this guarantee will become invalid.
9. The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies.

The completeness and appearance of the product and accompanying materials raise ot rectify any discrepancierantee. You should check on the spot and The above guarantees are all guarantees we make regarding the products and rights that cannot e excited restoreth under the purport affects consumer Service supervision hotline: 400-885-8808

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>