TRANSFORMERS TF-G06 BT Dual Mode Headphones User Manual

TRANSFORMERS TF-G06 BT Dual Mode Headphones

Product Information

• Specifications
  • Compliance: Part 15 of FCC Rules
  • Radiation Exposure Limits: FCC approved for uncontrolled environment
  • Minimum Distance: 0cm between radiator and body

Product Usage Instructions

• Safety Guidelines
  • Always follow these safety guidelines to ensure proper and safe use of the product:
  • Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer.
  • Ensure that the device does not cause harmful interference and can accept any received interference.
  • Install and operate the equipment with a minimum distance of 0cm between the radiator and your body.
• Installation
  • Follow these steps to install the device:
  • Place the device in the desired location.
  • Connect the necessary cables and power source.
  • Ensure the minimum distance of 0cm between the radiator and your body is maintained during installation.
  • Power on the device and follow any specific setup instructions provided in the manual.
• Operation
  • To operate the device:
  • Refer to the user manual for detailed instructions on using the product features.
  • Keep the device within the recommended distance from your body during operation.
  • If you encounter any interference or undesired operation, contact customer support for assistance.

FAQs

• Q: What should I do if I experience interference while using the device?
  • A: If you experience interference, try repositioning the device or contacting customer support for further assistance.

Packing List

Product Diagram

1. Volume and buttons. Next track
2. Volume down button. Previous track
3. Multi-Function Button (MFB)
4. 3.5mm Audio Port
5. Microphone
6. Type-C Charging Port
7. BT indicator/power indicator

Caution On Battery

• Risk of explosion if battery is not replaced properly
• Replace with the same type of batteries only
• Self-replacement of battery is prohibited
• Return to manufacturer for service
• Keep batteries away from direct sunlight, high temperature and humidity

Headset specifications

• BT version: V5.4
• Transmission distance: ≥10m
• Horn diameter: 40mm
• Horn impedance: 32215%
• sensitivity: 116dB‡3dB @1kHz
• Frequency response: 20Hz-20KHz
• Charging time: About 2.5 hours
• Music time: About 8 hours
• Battery capacity: 250mAh 3.7V
• Rated input: 5V 200mA

Product operation instructions

1. Power On/Off
   • Earphone Off state: Press and hold 3 multi-function buttons (MFB), and the blue light will keep on for 1 second, and you will hear a “Power on” voice Hint, earphones on.
   • When the headset is powered on:
   • Method 1. Press and hold the 3 multi-function button. When the red light turns on for one second and you hear Power off, the headset is powered off.
   • Method 2. The device automatically shuts down after 5 minutes of no connection.
2. Pairing
   • Long press the 2 multi-function keys, open the smart devices BT and search for the “TF-G06” headset match, click the connection, and when the pairing is successful, you will hear “Connected.”.
   • Vote: When first used and turned on, the headset will automatically enter pairing mode. This product has a memory function. When you use it again, you only need to turn on the headset and the device and automatically connect back).
3. Volume Control
   • To lower the volume, press the “-” key. An announcement tone is played at the minimum volume.
   • Up the volume: Press the “+” key for the volume. At the highest volume, an announcement is made.
4. Phone Call
   • Answer/End Call: short press the MFB
   • Reject Call: Long press the MFB about 2 seconds
   • Redial: quick double press the MFB to call the last dialled number.
5. Music
   • Play/Pause: press MFB;
   • Previous: Long press the volume “-” key for 2 seconds;
   • Next: Long press the volume “+” key for 2 seconds.
6. Voice assistant control function
   • Wake up Siri: Three hits MFB.
7. Audio Cable Operation
   • When the headset is connected to the device using a 3.5mm audio cable, the headset enters the automatic shutdown. After unplugging the audio cable, follow the pairing steps to reconnect the BT function.
8. One drag two function
   • Step 1: Turn on the headset and connect to the first device;
   • Step 2: Turn off the Bluetooth of the first device and connect to the second device;
   • Step 3: Turn on the BT of the first device, and the headset automatically connects with the first device; Ability to switch between devices.

LED Indicator Status

Reset the Paired Device List

When the device is powered on, hold down the “+” and “-” keys for 5 seconds to clear the Pairing record. When pairing is entered, the audio prompt “pairing” is heard.

The name and content of harmful substances in the earbuds

Warranty Statement

Disclaimer

• This user manual does not have any form of guarantee, position expression or other implication.
• The mentioned products, specifications and information are for reference only, and the content will also be updated on the web at any time without additional separate notice

Warranty statement:

• The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase (“Warranty Period”), under normal conditions of use due to quality defects damaged, can be repaired.
• Free repair; free replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced product.
• Continue to enjoy the warranty during the ticket date the prevalence hours se date can be determined el by the sale it your app rods warranty, please call the product service hotline first and execute it in the manner instructed by us.
• When applying for a warranty, you need to provide an accurate, complete and filled out valid sales invoice.

The above guarantee does not apply to the following situations:

1. Exceeding the validity period of the three packs;
2. Altering the warranty card and product code does not match the product body;
3. Causes caused by misuse, abuse or improper transportation, use, maintenance or storage obstacles or damage;
4. Failure or damage caused by force majeure (such as earthquake, war, disaster. etc. or accident bad:
5. The zipper and tower buckle are damaged due to excessive force;
6. Disconnection or tearing caused by excessive load;
7. Any damage caused by sharp objects;
8. Products with signs of burning or flooding;
9. Damage caused by unauthorized disassembly;
10. Aging, discolouration, abrasion, rupture and other losses that occur during the normal use of the product.
11. If the original identification label of the product is changed or damaged, this guarantee will become invalid.
    • The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies.
    • The above guarantees are all guarantees we make regarding the products and are only applicable in mainland China.
    • Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.
    • Service supervision hotline: 400-885-8808

Warranty Service

• Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

Certificate of Approvall

• Product No: –
• Production Time:
• OC:-

FCC

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>