TRANSFORMERS TF-T26 Pro Ear Mounted BT Earphones Instruction Manual

TRANSFORMERS TF-T26 Pro Ear Mounted BT Earphones

Product Specifications

• Product Name: TF-T26 Pro Ear mounted BT earphones
• Product Number: 128
• Dimensions : 66.5 x 95mm

Product Usage Instructions

Setting Up Bluetooth

To pair your device with the earphones:

1. Enter device pairing status by ensuring the red and blue lights in the primary ear flash alternately, and the secondary ear turnsoff.
2. Select ‘TF-T26 Pro’ on your device to complete pairing.

Wearing Method

Follow these steps to wear the earphones correctly:

1. Hold the earphones with one hand and place them over your ears.
2. Adjust the horn position of the earphone by moving it up and down until it fits the outline of your ear completely.
3. Ensure proper L/R orientation for correct wearing.

LED Indicator Status

• Power On: Blue light stays on for 1 second
• Power Off: Red light stays on for 1 second
• TWS Pairing Status : Red and blue lights flash alternately
• Earphone Low Battery Warning: Headset blinks red
• Earphone Charging: Headset’s red light remains on
• Headphones Fully Charged: The headphone red light turns off

Touch Operation

• General Mode:
  • Voice Assistant: Press and hold the left function key for 2 seconds to start/stop.
  • Volume Increase: Click the right function key.
• Music Playback Mode:
  • Volume Down: Click the left function button.
  • Play/Pause: Double-click any headset touch button.
  • Previous Track: Three hits on the left ear function key.

Packing list

Product diagram

Tips

1. Except for the operation methods specifically marked in the manual, please do not try to disassemble or replace any parts of the earbuds.
2. Don’t put the earbuds in the water or any other liquid. The earbuds are not waterproof.
3. If any liquid enters the product accidentally, please disconnect and remove the connection immediately.
4. Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electric shock.
5. Do not put the product near the heat source or expose it to the fire source directly.
6. Do not put the product in an environment with strong electromagnetic force, otherwise, it will cause product malfunction.

Specification parameter

• BT version: V5.4
• Pairing model: TF-T26 Pro
• Transmission distance: ≥10m
• Speaker unit: Φ13mm 32Ω
• Sensitivity: 109±3dB@1kHz
• Frequency response range: 20-20kHz
• Transmission frequency: 2.402-2.480MHz
• Rated power: 3mW
• Music playback time: About 8 hours (50% Volume) Charging time: 1.5 hours
• Battery capacity: 50mAh 3.7V
• Charging time: About 2 hours
• Battery capacity : 550mAh 3.7V
• Number of headphone charges: About 3 times
• input: 5V 320mA

Product operation instructions

Boot:
Method 1: Open the top cover of the charging case, and the earphones will turn on automatically. Method 2. Press and hold the left/right multi-function button for 3 seconds, and the blue light will turn on for 1 second. (Voice prompt tone: “power on”)

Shutdown:
Method 1. Put back the charging case, close the upper cover, and the earphones will automatically turn off. Method 2. If the headset is not connected within 3 minutes, the device automatically shuts down. (Voice prompt tone: “power off”)

BT pairing:

1. Remove the earphones from the charging case, and the left and right earphones automatically enter Bluetooth pairing mode, waiting for a connection. (Audio notification tone: “pairing”)
2. Turn on BT on the mobile phone, search the device name “TF-T26 Pro”, and tap to enter the connection. (Voice prompt tone: “connected”)

Wearing method

1. Hold the ear with one hand and hang the earphones over your ears.
2. Rotate and adjust the horn position of the earphone, moving it up and down until the earphone completely fits the outline of the ear.
3. Pay attention to distinguish the wearing position of L/R, if it is reversed, it cannot be worn up.

LED indicator status

Touch operation

Restore factory settings

• Method: Power on is not connected: click the left/right earphone 5 times, and then the red light will be on for 1 second.
• Method: Power-on connection status: Tap the left and right earphone five times, press and hold for 10 seconds within 3 seconds, and turn off the red light for 1 second to clear the pairing information between the earphone and Bluetooth device.

The name and content of harmful substances in the earbuds

This form is compiled by SJ/T 11364.

• O: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit required by GB/T 26572.
• X: Indicates that the hazardous substance at least in a certain homogeneous material of the part exceeds The limit requirements specified in GB/T 26572.

The parts marked with “X” on the form are all harmful due to the limitations of global technological development. Substitution of substances.

Printed circuit board components:
Including printed circuit boards and their parts, electronic components, etc., and depending on the product model, the earbuds you purchased may not contain all the above components.
Does not contain 6 kinds of toxic and harmful substances or contains but is less than the limit value, the letter “e” stands for the English letter electronic; The initials of electrical and environment; The curved arrows around it indicate recyclability.

Warranty Statement

Disclaimer
This user manual does not have any form of guarantee, position expression or
other implication. The mentioned products, specifications, and information are for
reference only  and the content will also be updated on the web at any time
without additional notice

Warranty statement
The product attached to this document is guaranteed as follows If the product is twelve (12) months from the date of purchase(“Warranty Period”), under normal conditions of use due to quality defects damaged, can be repaired. Free repair; free replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced product. Continue to enjoy the warranty during the ticket date shall prevail the purchase date can 5 be determined, tal by sale warranty period shall be 13 (13) months
If you apply for a warranty please call the product service hotline first and execute it in the manner instructed by us. When applying for a warranty, you need to provide an accurate complete, and filled-out valid sales invoice.

The above guarantee does not apply to the following situations:

1. Exceeding the validity period of the three packs;
2. Altering the warranty card and product code does not match the product body;
3. Causes caused by misuse, abuse, or improper transportation, use, maintenance, or storage obstacles or damage;
4. Failure or damage caused by force majeure (such as earthquake, war, disaster, etc.) or accident Badi
5. The zipper and tower buckle are damaged due to excessive force;
6. Disconnection or tearing caused by excessive load;
7. Any damage caused by sharp objects;
8. Products with signs of burning or flooding;
9. Damage caused by unauthorized disassembly;
10. Aging, discoloration, abrasion,rupture, and other losses that occur during the normal use of the product.
11. If the original identification label of the product is changed or damaged, this guarantee will become invalid.
    The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies.

The above warranties are all warranties we make concerning our products.
Nothing in this document affects what cannot be done under law Exclusion or limitation of consumer rights.

Service supervision hotline: 400-885-8808

Warranty Service
Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

User info

• User name: Email
• Contact number : Postal code
  Mailing address

Product information

Product name: Product number
Product barcode / Serial number / Batch number

Vendor information

• Name
• Address
• Contact number: Postal code
• Sales date: Invoice number
• Remark

Certificate of Approval

FCC

FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Frequently Asked Questions

• Q: Are the earbuds waterproof?
  • A: No, the earbuds are not waterproof. Do not expose them to water or any other liquids.
• Q: How do I restore factory settings?
  • A: Keep the red light on for 1 second to restore factory settings.
• Q: What should I do if liquid enters the product accidentally?
  • A: If any liquid enters the product, disconnect and remove the connection immediately and allow it to dry before use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>