TRANSFORMERS TF-T03 True Wireless Bluetooth Headset Instruction Manual
- June 16, 2024
- TRANSFORMERS
Table of Contents
TRANSFORMERS TF-T03 True Wireless Bluetooth Headset Instruction Manual
Warranty Service
Der wer, this wormsey card is the proof of your future wamy pantion pleme cooperstowith the seller to fill it out and keep it for it for future use!
User info
User name| | Email|
Contact number| | Postalcode|
Mailing address|
Product information
Product name| | Product number|
Product barcode / Serial number / Batch number|
Vendor information
Name|
Address|
Contact number| | Postal code|
Sales date| | Invoice number|
Remark|
Certificate of Approval
Product No:
Production Time:-
QC:
Packing list
Headset X2
Charging CaseX1
Instructions Warranty card
Type-C Charging CableX1
Product diagram
Tips
- Except for the operation methods specifically marked in the manual,please do not try to disassemble or replace any parts in the earbuds.
- Don’t put the earbuds in the water or any others liquid. The earbuds are not waterproof.
- If any liquid enters the product by accidentally, please disconnect and remove the connection immediately.
- Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electricshock.
- Do not put the product near by the heat source or expose it to the fire source directly.
- Do not put the product in the environment with strong electromagnetic force, otherwise it will cause product malfunction.
Product specifications
Bluetooth version: V5.3
Transmission distance: 210M
Music time: 4 hours
Talk time: About 3 hours
Standby time: About 75 hours
Horn size: 13mm
Charging time: 1.5 hours
Battery capacity: 25mAh
Rated input: 5V-25mA
Charging case specifications
Battery capacity: 300mAh
Charging time: 1.5 hours
Rated input: 5V 300mA
Headset charging times: About 3.5 times
(All technical information is subject to actual performance)
To charge the charging bay, connect the bay to the 5V power adapter with a
Type-C charging cable.
(Warm tip: When the headset battery is lower than 3.3V, a low battery reminder
will be broadcast (sound prompt: “battery low”, once every 1 minute), and the
headset red light will blink slowly (every 5 seconds). Headset power below
3.2V will automatically shut down, and the red light will flash three times to
shut down (sound prompt: “power off”).
Rated input: 5V25mA (headset)
Rated input: 5V-300mA (charging cose)
Headset LED indicates status
. Power On| The blue light will be on for I second and tum.on red and blust
alteramaly
---|---
Power Off| The red light flashes there lives
Paving s| Before forming a team, red and blue alternate Team successfully,
left ear main engine red and blue alternate night ear auxiliary engine light
out
Disconnect| The red light is steccty on, and the full light suff
Charging bay light ndicates status
Chasge the eorphone| The ice blue light goes off after 21 counter clockwise
tums
---|---
Charging ben| Ice blue LED light has been breathing
Charging tray is fully charged| ce tilue LED light ling bright 305 after
extinguished
Chorge boty low power warring| e blue LED light bleiks 5 times and thers goes
out
Lift the lid| Turn the ice blue light clockwise 5 times and light up from the
bottom left corner
Left earphone in stormge| Torm the ice blue light clockwise for tum and
breathe 11 more tiities before extinguishing
Right earphone in storage| Turn the ice blue light crumerclockwise for 1 tum,
Breathe Il more times and then extinguish
Dosing cap| Ice blue light turme 30ml25 turma) counterclockwise and then goes
out
Product Operation Instructions
Power on
Method 1
Renove the earphone from the charging bay and the earphone will turn on
automatically
Method 2 :
Long press the touch button for 3 seconds, the blue light will light up for 1
second, and the earphone will start (Startup prompt tone “power on
@Shutdown
Method 1:
Put back to the charging bin, earphone automatically shut down
Method 2.
The headset outomatically shuts down if the device is not connected within 5
minutes (Shutdown tone: “power off”)
Pairing
Step 1
Left and right automatically search for nearby earphones to initiate pairing,
and the pairing is successfully locked in a team; prompt tone:
“Pairing”
Step 2
Open the Bluetooth list of smart devices, search for “TF-103 and connect or
automatically connect back The connection is successful (prompt tone:
“connected”)
Connecton succeeded: Volce prompt: “connected
Touch operation
**General mode
** Voice assistant Long press left headset ouch button for 2 seconds to start/close (” drip “sound release)
Volume Plus. Click the right headset touch button Volume reduction: Click the left headset touch button
**Music playback mode
** Play/Pause Double click any headset touch button
Last song: Three strikes left headset touch button
Next song Three strikes right headset touch button
**Call Mode
**
Answer: Double click the touch button of any headset touch button
End Call: Double click the touch button of any headset touch button
Reject a call Press and hold any headset touch button for 2 seconds
Game/Music mode switch
Music mode. Long press the right ear touch button for 2 seconds (Sound music mode”)
Game mode: Long press the right ear touch button for 2 seconds(Sound: “game mode”
Restore factory settings
If the earphone is not connected to the device, press the left/right earphone
touch button five times to restore factory Settings and power alf
The name and content of harmful substances in the earbuds
| Part Names | Harmful Substances |
|---|---|
| Pb | Hg |
| Printed circult assembly | |
OcIndicates that the content of the hazardous sultistance in homogeneous
materials of the part is in below the limit required by GB/T 26572Xindicates
that the hazardous substance at least in a certain homogeneous material of the
part exceeds. The limit requirements specified in GB/T 26572The parts marked
with “X” on the form are all harmful due to the limitations of global
technological development. Substitution of substances.
Including printed circuit boards and their parts electronic components etc.and
depending on the product model, the earbuds you purchased may not contain all
the above components.
Electronic and electrical products sold in the People’s Republic of China must
mark this LOGO, the number in the logo represents the product under normal use
Environmental protection use period
Warranty statement
Disclaimer This user manual does not have any form of guarantee, position expression or other implication. The mentioned products, specifications and information are for reference only, and the content will also be updated on the web at any time without additional separate notice Warranty statement The product attached to this document is guaranteed as follows If the product is twelve (12) months from the date of purchase(“Warranty Period”), under normal conditions of use due to quality defects damaged, can be repaired Free repair free replacement if the manufacturer confirms that it cannot be repaired, repaired or replaced product. Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchased by sole the ticket date shall prevail, if the purchase date cannot be determined the warranty period shall be 13 (13) months If you apply for a warranty please call the product service hotline first and execute it in the manner instructed by us. When applying for warranty, you need to provide an accurate, complete and clearly filled aut valid soles invoice
The above guarantee does not apply to the following situations
- Exceeding the validity period of the three packs
- Altering the warranty card and product code does not match the product body,
- Causes caused by misuse, obuse or improper transportation.use, maintenance or storage obstacles or damage,
- Failure or damage caused by force majeure (such as earthquake, war, disas ter, etc.) or accident bad,
- The zipper and tower buckle are damaged due to excessive force,
- Disconnection or teaing caused by excessive load,
- Any damage caused by sharp objects,
- Products with signs of burning of flooding,
- Damage caused by unauthorized disassembly;
- Aging, discoloration, abrasion, rupture and other losses that occur during the normal use of the product
- if the original identification label of the product is changed or damaged, this guarantee will become invalid
The completeness and appearance of the product and accompanying materials ore ore not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies.
The above guarantees are all guarantees we make regarding the products, and are only applicable in mainland China Nothing in this document affects consumer rights that cannot be excluded or restricted under the low profit.
Service supervision hotline: 400-885-8808
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. -
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance Ocm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>