TRANSFORMERS TF-T02 True Wireless Bluetooth Headset Instruction Manual

TRANSFORMERS TF-T02 True Wireless Bluetooth Headset

Product Information

Specifications

• Device Type: [Product Name]
• Approved Manufacturer: [Manufacturer Name]
• Compliance: FCC part 15
• Radiation Exposure Limits: FCC-compliant
• Minimum Distance: 0cm between radiator and body

Product Usage Instructions

Caution
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Limits
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It is recommended to install and operate the equipment with a minimum distance of 0cm between the radiator and your body.

Frequently Asked Questions (FAQ)

• Q: What is the FCC compliance for this device?
  A: This device complies with part 15 of the FCC Rules.

• Q: How far should I keep the device from my body?
  A: It is recommended to maintain a minimum distance of 0cm between the radiator and your body.

TF-TO2 True Wireless Bluetooth Headset Instruction manual.

Packing list

Product Diagram

Important Tips

1. Except for the operation methods specifically marked in the manual, please do not try to disassemble or replace any parts of the earbuds.
2. Don’t put the earbuds in the water or any other liquid. The earbuds are not waterproof.
3. If any liquid enters the product accidentally, please disconnect and remove the connection immediately.
4. Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electricshock.
5. Do not put the product near the heat source or expose it to the fire source directly.
6. Do not put the product in an environment with a strong electromagnetic force, otherwise, it will cause product malfunction.

Product specifications

• Bluetooth version: V5.3
• Transmission distance: 10M
• Music time: About 5 hours
• Talk time: About 3.5 hours
• Standby time: About 90 hours
• Horn size: Φ 13mm
• Charging time: 1.5 hours
• Battery capacity: 33mAh
• Rated input: 5V 30mA

Charging case specifications

• Battery capacity: 300mAh
• Charging time: 1.5 hours
• Rated input: 5V 300mA
• Headset charging times: About 3 times

(All technical information is subject to actual performance)

To charge the charging box
The Type-C charging cable connects the charging bay to the 5V power adapter. (Warm tip: When the headset battery is less than 3.3V, it will broadcast a reminder of low battery (voice prompt: battery low). The red light flashes slowly, reminding me once every minute. Please charge the earphones in time.

LED Indicator Status

Operating Instruction

1. Power on

   • Method 1: Remove the earphones from the charging bay and turn on the earphones
   • Method 2: Long press the left and right earphone touch area for 3 seconds (Startup prompt tone: “power on”

2. Shutdown

   • Method 1: Put it back in the charging bay, and the headset automatically shuts off
   • Method 2: If the headset is not connected within 5 minutes, the device will automatically shut down
     (Shutdown prompt tone: “power off”)

3. Pairing

   • Step 1: After the device is started, the left and right earphones are automatically connected and enter the pairing state with mobile phones (prompt tone: “Pairing”).
   • Step 2: Open the Bluetooth list of the smart device, search for “TF-TO2” and connect
     Tips: If the left and right earphones do not match, please restore the factory Settings, put them back in the charging box and turn on the automatic pairing

Touch operation

• General mode
• Music playback mode
• Call mode
• Game/Music mode switch

Restore factory settings

If the left and right earphones are powered on and not connected to the device, press L/R 5 times and the earphones turn off with a red light flash three times. Factory Settings are restored successfully.

The name and content of harmful substances in the earbuds

Warranty Statement

Disclaimer
This user manual does not have any form of guarantee, position expression or other implication. The mentioned products, specifications and information are for reference only, and the content will also be updated on the web at any time without additional separate notice.

Warranty statement:
The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase(“Warranty Period”), under normal conditions of use due to quality defects damaged, can be repaired.Free repair; free replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced product. Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchased by sale the ticket date shall prevail; if the purchase date cannot be determined, the warranty period shall be 13 (13) months.

If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us. When applying for a warranty, you need to provide an accurate, complete and filled-out valid sales invoice.

The above guarantee does not apply to the following situations:

1. Exceeding the validity period of the three packs;
2. Altering the warranty card and product code does not match the product body;
3. Causes caused by misuse, abuse or improper transportation, use, maintenance or storage obstacles or damage;
4. Failure or damage caused by force majeure (such as earthquake, war, disaster, etc.) or accident;
5. The zipper and tower buckle are damaged due to excessive force;
6. Disconnection or tearing caused by excessive load;
7. Any damage caused by sharp objects;
8. Products with signs of burning or flooding;
9. Damage caused by unauthorized disassembly;
10. Aging, discolouration, abrasion, rupture and other losses that occur during the normal use of the product
11. If the original identification label of the product is changed or damaged, this guarantee will become invalid.

The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies. The above guarantees are all guarantees we make regarding the products and are only applicable in mainland China. Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.

• Service supervision hotline: 400-885-8808.

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>