TRANSFORMERS TF-Y01 BT Speaker User Manual

TF-Y01 BT speaker
Instruction manual

Packing list

Product specification

Effective distance: ≥ lOM
Horn diameter: φ 52mm
Impedance: 4 Ω
Signal to noise ratio: ≥ 90d8
D stortion: :≤ 5%
Frequency response: 20Hz-10KHz
Rated input: SV SOOmA
Rated capacity of lithium battery: 1200mAh
Rated power: 3W
Charging time: approximately 3 hours
Usage time: approximately 6 hours

Tips

1. Except for the operation methods specificaly marked in the manual,please do not try to disassemble or replace any parts in the earbuds.
2. Don’t put the earbuds n the water or any others liquid.The earbuds are not waterproof.
3. lf any l quid enters the product by accidentally,please disconnect and remove the connection mmediately.
4. Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electricshock.
5. Do not put the product near by the heat source or expose it to the fire source directly.
6. Do not put the product in the environment w th strong electromagnetic force, otherwise it will cause product malfunction.

Keys and functions

— On/Off button, long press to power on or off.
— Short press to display the previous song and long press to display the volume reduction.
— Short press to move to the next track, and long press to add volume.
–Click Answer/Hang up, double-click callback, and hold down to reject the call.
— Tap to play/pause, double-click to TWS couplet.
Double-click the pause/play button on any two speakers of the same model when they are powered on, wait about 5 seconds, and a “drip” sound appears, that is, TWS pairing is completed.
Double click the pause/play button again to disconnect.
Power off: When the speaker is not in use, long press the key to power off to prevent power loss. Low power alarm and automatic shutdown function: when the battery power is less than 10%, the speaker will sound a prompt tone, and the speaker should be
charged in time, when the power is less than 3%, the machine will automatically shut down.

Product operation instructions

1. BT use method

• Press and hold the “ ” key for about 3 seconds to power on.
  The prompt sound will sound and the blue light will flash quickly.

• Open BT device Settings, search for Bluetooth connection name “TF-Y01” and click Connect, Bluetooth connection success prompt sound, blue light long on; When you use the speaker again, turn on the BT between the speaker and the smart device, and it will automatically connect back.

• BT automatic connection function: After successful BT connection, when the effective distance is exceeded, it will be automatically disconnected, and after returning to the effective distance, the BT speaker and smart device will be automatically connected.

2. Indicator status

• BT mode: Connected state, the blue light is on for a long time, and the blue light blinks slowly when playing music.
• Pairing status: The blue indicator blinks quickly.
• Charging indicator: charging red light on, full red light off.

Common problems and solutions

require password: 0000
The music plays staccato| Whether the connection distance is out of range or there is an obstacle between the speaker and the phone
Play without sound| Check that the speaker is at its lowest
Unable to boot| Check whether the built-in battery of the speaker is charged
The power light is off| Check that the charging port is plugged in

The name and content of harmful substances in the earbuds

This form is compiled in accordance with SJ/T 11364.
O:Indicates that the content of the hazardous substance in all homogeneous materials of the part is in below the limit required by GB/T 26572.
X:Indicates that the hazardous substance at least in a certain homogeneous material of the part exceeds The limit requirements specified in GB/T 26572.
The parts marked with “X” on the form are all harmful due to the limitations of global technological development. Substitution of substances.
Printed circuit board components:
Including printed circuit boards and their parts,electronic components, etc.and depending on the product model,the earbuds you purchased may not contain all the above components.
Electronic and electrical products sold in the People’ s Republic of China must mark this LOGO,the number in the logo represents the product under normal use Environmental protection use period.

Warranty statement

Disclaimer
This user manual does not have any form of guarantee, position expression or other implication. The mentioned products,specifications and information are for reference only,and the content will also be updated on the web at any time without additional separate notice

warranty statement:
The product attached to this document is guaranteed as follows:If the product is twelve (12) months from the date of purchase(““Warranty Period””),under normal conditions of use due to quality defects damaged,can be repaired.Free repair;free replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced product.Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days).Purchased by sale the ticket date shall prevail;if the purchase date cannot be determined,the warranty period shall be 13 (13) months
If you apply for a warranty,please call the product service hotline first and execute it in the manner instructed by us.When applying for warranty,you need to provide an accurate,complete and clearly filled out valid sales invoice.

The above guarantee does not apply to the following situations:

1. Exceeding the validity period of the three packs;
2. Altering the warranty card and product code does not match the product body;
3. Causes caused by misuse,abuse or improper transportation,use,maintenance or storage obstacles or damage;
4. Failure or damage caused by force majeure (such as earthquake,war,disas- ter,etc.) or accident bad;
5. The zipper and tower buckle are damaged due to excessive force;
6. Disconnection or tearing caused by excessive load;
7. Any damage caused by sharp objects;
8. Products with signs of burning of flooding;
9. Damage caused by unauthorized disassembly;
10. Aging,discoloration,abrasion,rupture and other losses that occur during the normal use of the product.
11. If the original identification label of the product is changed or damaged,this guarantee will become invalid.

The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee.You should check on the spot and raise objections to any discrepancies.

The above guarantees are all guarantees we make regarding the products,and are only applicable in mainland China.Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.
Service supervision hotline: 400-885-8808

Warranty Service
Dear user,this warranty card is the proof of your future warranty application,please cooperatewith the seller to fill it out and keep it for future use!

User info

User name| | Email|
---|---|---|---
Contact number| | Postal code|
Mailing address|

Product information

Product name| Product number|
---|---|---
Product barcode / Serial number / Batch number|

Vendor ntorrnatron

Name|
---|---
Address|
Contact number| | Postal code|
Sales date| | Invoice number|
Remark|

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>