TRANSFORMERS TF-T05 Clip On Bluetooth Headset Instruction Manual

TRANSFORMERS TF-T05 Clip On Bluetooth Headset

Packing list

• Earphone X2

• Charging box

• Type-C Charging

• Instructions & Warranty card

Product structure

Tips

1. Except for the operation methods specifically marked in the manual, please do not try to disassemble or replace any parts in the earbuds.
2. Don’t put the earbuds in the water or any others liquid. The earbuds are not waterproof.
3. If any liquid enters the product by accidentally, please disconnect and remove the connection immediately.
4. Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electrics hock.
5. Do not put the product near by the heat source or expose it to the fire source directly.
6. Do not put the product in the environment with strong electromagnetic force, otherwise it will cause product malfunction.

Product parameter

Headset parameters:

Bluetooth version: V5.3
Transmission distance: 10M
Music time: About 5 hours
Standby time: About 100 hours
Charging time: < 2 hours
Battery capacity: 30mAh/3.7V
Horn size: 13mm
Transmission frequency: 2.402-2.48GHz
Rated input: 5V 35mA

Charging box parameters:

Battery capacity: 200mAh/3.7V
Charging time: < 2 hours
Operating voltage: 3.2V~4.2V
Rated input: 5V 160mA
(All technical information is subject to actual performance)

Charge the charging box Connect the charging box to the 5V power adapter with a Type-C charging cable. (Warm tip: When the headset Battery is less than 3.2V,a low battery reminder will be broadcast (Voice prompt: “du” when the battery is low), The low battery indicator displays once every 1 minute. The low battery indicator blinks red.

Usage method

1. Press one hand over your ear and clip it like an earring.
2. First clip it above the ear and move it up and down to the best listening position.
3. Pay attention to the round in the front, flat in the back please do not mistake before and after.

Product Operation Instructions

1. Power on
2. Long press the button for about 3 seconds to turn on the headset;
3. Open the upper cover of the charging compartment when the earphone is in the charging compartment, take out the earphone and start up automatically; (LED indicator status: “White light flashes 3 times”)
4. Shutdown
5. Long press the button for about 5 seconds to turn off the headset;
6. Put the cover on the charging bin cover, automatically shut down and charge;
7. The device is disconnected and automatically shuts down after 5 minutes. The red light is steady on for one second and then off (LED indicator status: “The red light is long on”, voice prompt: “du”)
8. Bluetooth pairing
   • Step 1: Open the charging compartment, turn on the earphone, and match; (LED indicator state: left/right earphone red and white lights flashing alternately)
   • Step 2: Open the Bluetooth list of smart devices, search for “TF-T05” and connect
   • Warm tip: If the left and right earphones do not match, please restore factory Settings, put them back in the charging box and open the automatic pairing The left and right pairs are successfully matched, the red and white lights of the main ear flash alternately, and the auxiliary ear lights are off. This state also indicates that the headset is a Bluetooth device Search pattern.

Touch operation

• General mode
  

• General mode
  

• Call mode
  

Restore factory settings

Bluetooth startup is not connected, 5 clicks (either side can be used) to clear the pairing information with the device and automatically shut down The red light is on for one second and then off.

The name and content of harmful substances in the earbuds

Part Names|

Harmful Substances

---|---

Pb

|

Hg

|

Cd

|

Cr(VI)

|

PBB

| PBDE
Printed circuit assembly|

O

|

O

|

O

|

O

|

O

|

O

Small structural parts such as shell|

O

|

O

|

O

|

O

|

O

| O
This form is compiled in accordance with SJ/T 11364.
0:Indicates that the content of the hazardous substance in all homogeneous materials of the part is in below the limit required by GB/T 26572.
X:Indicates that the hazardous substance at least in a certain homogeneous material of the part exceeds The limit requirements specified in GB/T 26572.
The parts marked with “X” on the form are all harmful due to the limitations of global technological development. Substitution of substances.
Printed circuit board components:
Including printed circuit boards and their parts, electronic components, etc. and depending on the product model, the earbuds you purchased may not contain all the above components.
| Electronic and electrical products sold in the People’s Republic of China must mark this LOGO, the number in the logo represents the product under normal use Environmental protection use period.

Warranty statement

Disclaimer
This user manual does not have any form of guarantee, position expression or other implication. The mentioned products, specifications and information are for reference only, and the content will also be updated on the web at any time without additional separate notice

Warranty statement:
The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase(“Warranty Period”), under normal conditions of use due to quality defects damaged, can be repaired. Free repair; free replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced product. Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchased by sale the ticket date shall prevail; if the purchase date cannot be determined, the warranty period shall be 13 (13) months.
If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us. When applying for warranty, you need to provide an accurate, complete and clearly filled out valid sales invoice.

The above guarantee does not apply to the following situations:

1. Exceeding the validity period of the three packs;
2. Altering the warranty card and product code does not match the product body;
3. Causes caused by misuse, abuse or improper transportation, use, maintenance or storage obstacles or damage;
4. Failure or damage caused by force majeure (such as earthquake, war, disas- ter, etc.) or accident bad;
5. The zipper and tower buckle are damaged due to excessive force;
6. Disconnection or tearing caused by excessive load;
7. Any damage caused by sharp objects;
8. Products with signs of burning of flooding;
9. Damage caused by unauthorized disassembly;
10. Aging, discoloration, abrasion, rupture and other losses that occur during the normal use of the product.
11. If the original identification label of the product is changed or damaged, this guarantee will become invalid.

The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies.

The above guarantees are all guarantees we make regarding the products, and are only applicable in mainland China. Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.

Service supervision hotline: 400-885-8808

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

User info

User name| | Email|
Contact number| | Postal code|
Mailing address|
Product information
Product name| | Product number|
Product barcode / Serial number / Batch number|
Vendor information

Name|
Address|
Contact number| | Postal code|
Sales date| | Invoice number|
Remark|

Certificate of Approval

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>