BANNER 233717-3318483 Asset Monitoring Gateway with Snap Id User Guide

: September 6, 2024
: BANNER

Table of Contents

BANNER 233717-3318483 Asset Monitoring Gateway with Snap Id
Product Information
FAQ
Asset Monitoring Gateway Overview
Commission and Assign Connected Sensors
Limited Warranty
More Information
Mouser Electronics
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Product Information

Product Specifications

Product: Asset Monitoring Gateway with SNAP ID
Manufacturer: Banner Engineering Corp.
Warranty: 1 year limited warranty

Product Overview

The Asset Monitoring Gateway (AMG) with SNAP ID is designed to facilitate easy monitoring and management of connected sensors or converters. It provides a centralized hub for collecting data from various sensors and converters, enhancing asset monitoring capabilities.

FAQ

Frequently Asked Questions

Q: What is the warranty coverage for the Asset Monitoring Gateway with SNAP ID?
- A: The product is covered by a 1-year limited warranty from Banner Engineering Corp. This warranty covers defects in material and workmanship, and the company will repair or replace any defective product within the warranty period. However, it does not cover damage due to misuse, abuse, or improper installation.
Q: Where can I find a list of supported sensors and converters for the AMG with SNAP ID?
- A: You can refer to the Asset Monitoring Gateway with SNAP ID Brochure, part number b_51583459, for a comprehensive list of supported S15 converters, Modbus sensors, and accessories.

Asset Monitoring Gateway Overview

Asset Monitoring Gateway (AMG) with SNAP ID Overview

The Asset Monitoring Gateway (AMG) with SNAP ID provides commissioning, monitoring, and alarms for up to 20 supported Modbus® and SNAP SIGNAL® enabled sensors and converters. The gateway scans for individual sensors or converters andauto-detects model information, allowing users to change and assign Modbus server ID numbers to commission custom systems.

Identified devices report relevant register data every ten seconds, providing the quickest path to data that Banner Engineering offers for SNAP SIGNAL® and Modbus-equipped sensors. Connected units can be grouped and renamed. All relevant input registers can have threshold alarms assigned to them individually. The alarm status is indicated both on-screen locally by color and mirrored by the light on the enclosure.

All compatible sensors/converters attached to the Gateway are auto-detected locally (SNAP ID). All data and threshold settings/alarms are relayed to and mirrored in the Banner Cloud Data Services (BannerCDS) website using an Ethernet or cellular connection (requires additional BannerCDS data plan).

For more information, refer to the following documents on www.bannerengineering.com:

Asset Monitoring Gateway with SNAP ID Instruction Manual, p/n 234288
Asset Monitoring Gateway with SNAP ID Brochure, p/n b_51583459

Commission and Assign Connected Sensors

Commission and Assign Connected Sensors or Converters

When commissioning several sensors, connect each new sensor/converter one at a time and repeat these instructions for each new sensor/ converter.

After the AMG has initialized (about one minute), touch the Utilities icon in the lower right corner of the main page to go to the main configuration/device information menu.
In the Sensor Utilities column, touch Sensor Scan/ID Assign.
- The Sensor table will initially be unpopulated.
Connect any supported Banner Modbus sensor or S15 converter using a splitter cable or hub with power connected to the homerun cable and a branch connected to the Gateway M12 connector on the bottom right of the enclosure.
- See the Asset Monitoring Gateway with SNAP ID Brochure, p/n b_51583459 for lists of supported S15 converters, Modbus sensors, and accessories.
Select Scan IDs and touch YES when prompted to confirm.
- The Gateway scans for connected sensors for 20 seconds, as indicated by the red Scanning…. message displayed at the bottom of the screen. Previously undetected devices appear in the table as ID 1 in the second column. The model name and sensor type should match the attached sensor/converter. When initially commissioning devices, it is important to connect only one new sensor/ converter at a time. The gateway scans for new devices based on the default SID #1 so it is also important to change all identified devices’ SID # when you will be adding more than one device.
To change the detected devices’ SID #, highlight the sensor needing to be changed by touching the row in which it appears and select Change ID. Touch Yes to confirm. The Enter New ID field automatically increments to the closest available SID #. (This field is also manually configurable.) After a SID # has changed, the sensor table repopulates and displays the new SID # associated with the learned device. All previously learned sensors continue to appear in the table unless they are deleted from the system using this screen.

Connection example with limitless combinations of SNAP ID sensors and connectivity accessories

Asset Monitoring Gateway
Sensor
Molded Junction Block
Splitter
Cordset
Ethernet
Optional Cellular Connectivity
Banner Cloud Data Services

Limited Warranty

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.

For patent information, see www.bannerengineering.com/patents.