kdln TATU Table Lamp Instruction Manual
- June 17, 2024
- kdln
Table of Contents
ASSEMBLY INSTRUCTIONS
TATU
MR SMITH STUDIO
TATU Table Lamp
WARNING
The safety is guaranteed by the appropriate use of the following instructions,
so you must keep them.
Always disconnect the main voltage before working on the appliance.
Never use abrasive products or aggressive detergents for cleaning the lamp.
If the external cable of this appliance is damaged, it must be replaced by the
manufacturer, its after sales service or other equivalent qualified person only
in order to avoid any danger.
KDLN will not provide a replacement until the nature of defect has been
determined.
ASSEMBLY INSTRUCTIONS
Dimmer
A slight amount of pressure is required to switch the lamp on and off. To
adjust the levels, hold down until the desired intensity is reached.
Adjustment of the minimum: when switched on, press and hold the power button.
After 30 seconds, the lamp will switch off. When it is switched back on, check
the minimum level. The dimmer includes three minimum levels.
To change the level, repeat the procedure.
Kdln Srl
Viale L. da Vinci, 277
20090 Trezzano sul Naviglio, Milano
T. +39 0236538950 [email protected]