BANNER OS80 Series Operator Station Button User Manual
- June 1, 2024
- BANNER
Table of Contents
BANNER OS80 Series Operator Station Button
Custom Product Supplemental Instructions
Custom Model: OS80K2MX1XYQ-814246, p/n 814246.
This product has been modified from the standard product OS80K2LX1GRQ, p/n
804815. For standard product information, refer to p/n 205302 at
www.bannerengineering.com, or contact
Banner Engineering.
Banner verifies this configuration and does not guarantee product performance
in specific applications.
No cancelations and no returns (”NCNR”) on any accepted orders of Banner non-
standard or custom products.
Banner Engineering Corp. reserves the right to change, modify, or improve the
design of the product without assuming any obligations or liabilities relating
to any product previously manufactured by Banner Engineering Corp.
© Banner Engineering Corp. All rights reserved.
Modifications
- Custom operation, laser marking
2 Position Switch
Model
|
Operator
|
Illumination
|
Contacts
|
Out put
Color 1
|
Color 2
OS80K2MX1XYQ814246
|
2 Position, Off-On
|
N/A
|
Solid Yellow (activated)
|
2 NO
| Actuation (position 2) activates Color 2, and closes both NO outputs.
- Position 1
- Position 2
Color Key
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
WARNING:
- Do not use this device for personnel protection
- Using this device for personnel protection could result in serious injury or death.
- This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or deenergized (off) output condition.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>