NEEWER CB60 RGB LED Studio Light Instruction Manual
- June 12, 2024
- NEEWER
Table of Contents
NEEWER CB60 RGB LED Studio Light
Safety notes
To ensure the safety of you and others, please ensure you read the following safety advice before using this product. Please pay attention to the precautions highlighted in the manual. Please check the product before use and do not use damaged parts.
- Do not place flammable materials near the constant video light
- Please use a blower brush or clean cloth to remove dust and moisture.
- Do not expose the product to direct sunlight for long periods of time. The product should not be stored in direct sunlight.
- Do not cover the ventilation holes at any time.
- Do not attempt to disassemble or repair the device.
- Do not use in the rain, a humid environment, or other adverse weather conditions.
- Keep the working environment clear of cables. Keep this product out of reach of children and pets.
- Please turn off and remove the power supply before maintenance, and installing or removing accessories.
- Do not use chemicals or liquids to clean the lamp. Do not immerse any part of the device in liquid.
- The constant video light will heat up during use. Do not touch with your hands.
Product overview
This product is a constant video light designed with high-quality, durable aluminum alloy shell housing. It supports 3 operating modes: CCT, scene and HSI. It can be remotely controlled by a mobile app and also supports 2.4GH receiver control for added convenience.
Package Contents
Product Diagram
- 2.4GHz antenna
- Brightness “-“
- Brightness “+”
- Infinity/2.4GHz switch
- Power indicator
- Power switch
- Screen
- HSI mode/ temperature check
- FX mode/channel adjustment
- CCT mode/Infinity reset
- Switching within modes/ settings adjustment
- Power interface
- Long-press the “CCT” button for 5s to reset the Infinity function.
Installation
Installing the strobe light
- Mount the base of the light stand adapter onto a light stand and tighten the locking knob.
- Rotate the angle adjustment handle to adjust the angle of the strobe light.
Installing the standard reflector and photography lighting umbrella
- Push the latch toward the back, turn the protective cover counterclockwise until the tabs are aligned with the gaps, and then remove the protective cover.
- Align the standard reflector tabs with the mounting holes, push the reflector in, and turn it clockwise until the standard reflector is locked.
- Open your photography lighting umbrella and pass the soft light umbrella handle through the standard reflector and the umbrella support.
- The installation of the photography lighting umbrella is now complete.
- The photography lighting umbrella is not included in the accessories and needs to be purchased separately.
Instructions
Power on
- Power the strobe light using the supplied cable and turn on the power switch.
Brightness adjustment
- Short-press the” ” or “ ” button to adiust the brightness from 0% to 100%.
- Long-press the “ ” or “ ” button to quickly adjust the brightness.
Color temperature adjustment
- Short-press the”CCT” button to enter CCT mode.
- Short press the” ” knob until the color temperature value flashes.
- Rotate the” ” knob to adjust the color temperature.
Red and green compensation adjustment
- Short-press the ” CCT” button to enter CCT mode.
- Short-press the ” ” knob until the GM value flashes.
- Rotate the “‘ ” knob to adjust the red and green compensation.
Saturation adjustment
- Short-press the ” ” button to enter HSI mode.
- Short-press the” ” knob until the Svalue flashes.
- Rotate the “ ” knob to adjust the saturation.
Hue adjustment
- Short-press the “ ” button to enter the HSI mode.
- Short-press the “ “knob until the H value flashes.
- Rotate the “ ” knob to adiust the hue.
Scenes
- Short-press the ” FX/CH” button to enter FX mode.
- Rotate or short-press the ” ” knob to select different scenes.
Scene modes
Infinity mode
Move the “BT-2.4G” switch to the left, and the” ” icon will flash as the device enters the Infinity mode. The device can also be controlled through your Smartphone. To do so, please ensure the “Neewer” app is downloaded and connect through this medium. For detailed instructions, please scan the QR code of the “App Guide Page” on the app prompt card.
Please reset the Infinity before connecting the app. Long-press the “CCT” button for 5s to reset the Infinity function.
2.4GHz mode
- Move the “BT-2.4G” switch to the right to enter the 2.4GHz mode and the “ ” disappears.
- Long-press the ” FX/CH ” button until the CH value flashes and then turn the “ ” knob to adjust the channel from CHO to CH99.
- In 2.4GHz mode, set multiple lights to the same channel, for example, CH88. When adjusting one of the strobe lights, the other lights on the same channel will also change synchronously.
Temperature check
- Long-press the “ ” button for 3s to check the temperature of the light.
- Short-press the “ ” button to exit.
Notes
- Do not drop the product or expose it to a strong physical impact.
- When using, do not look directly at the light to prevent possible damage to your eyesight.
- Do not place the product near inflammable and explosive materials.
- Do not use the product in a damp or humid environment.
- Do not touch the product with wet hands.
- Please turn off the power when not in use.
- Please remove the protective cover before use.
- If not to be used for a long period of time, the product should be kept in a ventilated, dry place away from heat sources and magnetic fields.
Specifications
- Model: CB60 RGB
- Power Input: AC 100-240V, 50/60Hz
- Maximum Power: 70W
- Maximum ColorRendering Index: CRI 97
- Maximum Illuminance: 18000Lux/1m
- Brightness Range: 0%~100%
- Color Temperature Range: 2700K~6500K
- GM Value Range: -50~50
- Hue Range: 0~360
- Saturation Range: 0~100
- Scene Mode: 17
- Channel Range: CH.O~CH.99
Copyright
© 2022 Shenzhen Newer Technology Co., Ltd. All Rights Reserved. This document is the sole property of Shenzhen Newer Technology Co., Ltd and shall not be, reproduced, transmitted, transcribed, stored in a retrieval system or translated in any form, by any means, without prior written permission from Shenzhen Newer Technology Co., Ltd. Shenzhen Newer Technology Co., Ltd reserves the right to change content in this instruction manual at any time and without prior notice.
Version Control
Documents / Resources
|
NEEWER CB60 RGB LED Studio
Light
[pdf] Instruction Manual
2ANIV-CB60RGB, 2ANIVCB60RGB, CB60, CB60 RGB LED Studio Light, RGB LED Studio
Light, LED Studio Light, Studio Light, Light
---|---