BANNER EG24-ILVX-Q7 Precision Edge Sensor User Guide
- June 1, 2024
- BANNER
Table of Contents
BANNER EG24-ILVX-Q7 Precision Edge Sensor
Specifications
- Supply Voltage (Vcc): 10 V DC to 30 V DC
- Power Consumption, exclusive of load: 0.75 W
Product Information
The EG24 Precision Edge Sensor is a versatile sensor designed for precise edge detection in various industrial applications. It features a compact design and easy installation options for flexibility.
Features and Indicators
- Feature 1: Green LED (Power indicator)
- Feature 2: Amber LED (Output indicator)
- Feature 3: TEACH button (Mode selection and teach)
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
The EG24 can be ordered without the retroreflective arm or the arm can be removed for mounting flexibility. The provided retroreflective tape must be mounted 30 mm to 40 mm away from the lens for optimal performance.
Wiring Information
- Connector: 4-pin, M8
- Analog Out: + 10-30 VDC
- Key: 1 = Brown, 2 = White, 3 = Blue, 4 = Black
Configure the Sensor
The default configuration scales the 4 mA to 20 mA output across the full width of the 24 mm (0.94 in) sensing beam. The green LED flashes a number of times to indicate the measurement mode.
Certifications
Banner Engineering Corp. provides a limited warranty for the EG24 Precision Edge Sensor. For warranty details, refer to the product documentation.
FAQ
Q: What is the warranty period for the EG24 Precision Edge Sensor?
A: Banner Engineering Corp. offers a one-year warranty for the product starting from the date of shipment.
Quick Start Guide
Precision edge measurement sensor for web alignment, small part detection, and
width measurement.
This guide is designed to help you set up and install the EG24 Precision Edge
Sensor. For complete information on programming, performance, troubleshooting,
dimensions, and accessories, please refer to the Instruction Manual at
www.bannerengineering.com. Search for part
number 239439 to view the Instruction Manual. Use of this document assumes
familiarity with pertinent industry standards and practices.
WARNING
- Do not use this device for personnel protection
- Using this device for personnel protection could result in serious injury or death.
- This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition.
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
The EG24 can be ordered without the retroreflective arm or the arm can be removed for mounting flexibility. In either case, the provided retroreflective tape must be used and must be mounted 30 mm to 40 mm away from the lens to ensure optimal performance. If a replacement reflector is needed, contact Banner Engineering.
Features and Indicators
Wiring
NOTE: For model EG24-ILVA-Q7B, the analog output is on the black wire (pin 4) and the remote teach is on the white wire (pin 2)
Configure the Sensor
The default configuration scales the 4 mA to 20 mA output across the full
width of the 24 mm (0.94 in) sensing beam.
To configure the sensor, press and hold the TEACH button for 2 seconds to
enter teach mode. Then, do one of the following:
- Position the edge of the target for the 4 mA position and press the TEACH button one time. Move the edge of the target to where the 20 mA will be positioned and press the TEACH button one time. Teach twice with no target to set the maximum 4 mA to 20 mA span. This is the Default mode.
- Press the TEACH button two times to enter Width Measurement mode.
- Press the TEACH button three times to enter Gap Measurement mode.
The green LED flashes a number of times, which corresponds to the measurement mode, and the sensor returns to run mode.
Specifications
- Supply Voltage (Vcc)
- 10 V DC to 30 V DC
- Use only with a suitable Class 2 power supply (UL) or Limited Power Supply (CE)
- Power Consumption, exclusive of load
0.75 W
Banner Engineering BV
Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM
Turck Banner LTD Blenheim House Blenheim Court
Wickford, Essex SS11 8YT GREAT BRITAIN
Banner Engineering Corp Limited Warranty
- Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
- THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
- This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
- Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.
- For patent information, see www.bannerengineering.com/patents.
- Document title: EG24 Edge Measurement Sensor Quick Start Guide
Part number: 240133
Revision: B
Original Instructions
© Banner Engineering Corp. All rights reserved.