BANNER WLS15 BSZ High Intensity LED Strip Light Instruction Manual

: May 15, 2024
: BANNER

Table of Contents

BANNER WLS15 BSZ High Intensity LED Strip Light
Features
Wiring
WLS15 BSZ Specifications
Dimensions
Performance Curves
Accessories
Banner Engineering Corp Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Features

Banner’s WLS15 BSZ High Intensity LED Strip Lights have sturdy aluminum inner frames, encased in polycarbonate shells, making them ideal for indoor and outdoor applications.

Low-profile, space-saving design
Rugged, water-resistant design
Available in four lengths from 360 mm to 1200 mm
Daisy chain power to multiple lights
Optional snap clips for easy installation and repositioning
Capability to dim lights using the wiring pinout (Hi/Lo/Off)

These Work Light Strips are available as either stand-alone models, or as cascade models that can be daisy-chained together for longer lighting runs, with a minimum of wiring. Stand-alone models have one end for power connection and no connections at opposite end. A stand-alone model may be used as the last in the cascade series. Cascade models have one end for power connection, and a connection at the opposite end for connecting to other lights in the cascade. A double-ended accessory cordset may be used between each pair of lights in a cascade to extend the distance between lights.

For PWM dimming, use with the LC15T-127AP2RBGQP dimmer module. For more information, refer to the LC15T In-Line Touch Switch datasheet, p/n 217460.

IMPORTANT: Read the following instructions before operating the light. Please download the complete WLS15 High-Intensity LED Strip Light technical documentation, available in multiple languages, from www.bannerengineering.com for details on the proper use, applications, Warnings, and installation instructions of this device.

WLS15 BSZ Models

Wiring

WLS15 BSZ Specifications

Supply Protection Circuitry
Protected against reverse polarity and transient voltages See electrical characteristics on product label

Supply Voltage
24 V DC (+20%/-10%) Use only with a suitable Class 2 power supply (UL) or a SELV power supply (CE)

Supply Current

Light Length

| Typical Current (A) at

25°C (1)

| Max. Current (A) at

-40°C

---|---|---
0360 mm| 0.285| 0.360
0640 mm| 0.570| 0.720
0920 mm| 0.855| 1.080
1200 mm| 1.140| 1.440

Light Characteristics

Daylight White Efficacy: 110 lumens/watt typical at 24 V DC at 25 °C (77 °F) CRI: 80, minimum

Color

| Dominant Wavelenth (nm) or Color Temperature| Lighted Length Lumens (Typical at 25°C) (2)
---|---|---
360

mm

| 640

mm

| 920

mm

| 1200

mm

Daylight

White

|

5000K (±300K)

|

750

|

1500

|

2250

|

3000

Warm

White

| 3000K (±200K,

-100K)

|

700

|

1400

|

2100

|

2800

Spacing Criterion

Vertical: 1.26
Horizontal: 1.26

Connections

2 m (6.5 ft) integral PVC-jacketed cable or 150 mm (6 in) PVC-jacketed cable with a 4-pin M12 male quick-disconnect connector Models with a quick disconnect require a mating cordset Do not spray cable with a high-pressure sprayer or cable damage will result.

Environmental Rating
Rated IP66 and IP67
Suitable for wet locations per UL 2108

Values shown at 25°C – current and lumen values decrease 0.4% per 1°C from ambient. For example, a 1200 mm unit will have a maximum current of 1.440 A at -40°C and 1.026 A at +50°C.
Values shown at 25°C – current and lumen values decrease 0.4% per 1°C from ambient. For example, a 1200 mm unit will have a maximum current of 1.440 A at -40°C and 1.026 A at +50°C.

Vibration and Mechanical Shock

Vibration: 10 Hz to 55 Hz, 1.0 mm peak-to-peak amplitude per IEC 60068-2-6
Shock: 15G 11 ms duration, half sine wave per IEC 60068-2-27

Construction
Clear anodized aluminum housing; Polycarbonate outer housing, Polyamide end caps

Application Note
When connecting cascadable lights in series, it is important not to exceed maximum current limitations: Maximum length of light at 24 V DC: 3.0 m (9.8 ft) At 50% intensity, double the lengths

LED Lifetime
Lumen Maintenance – L70 When operating within specifications, output will decrease less than 30% after 70,000 hours.

Mounting
Integral mounting slots for M4 (#8) screws, tighten to 5 in·Ibf max torque Multiple bracket options available Secure cables within 150 mm (5.9 inches) of the light

NOTE: For 920 mm and 1200 mm models in environments that vary more than 10 °C (18 °F), it is recommended to use one of the mounting bracket options instead of the endcap slots. If using the LMBWLS15 clip bracket and additional attachment is desired, only one end may be fastened using one of the spacers provided in the LMBWLS15 hardware packet to allow the opposite end to expand and contract. See ” Mounting Accessories” on page 5 for bracket and tape options that allow expansion and contraction over temperature variations.

Operating Temperature

40 °C to +50 °C (–40 °F to +122 °F)

Storage Temperature

40 °C to +70 °C (–40 °F to +158 °F)

Certifications

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM

Dimensions

Models	L1	L2	L3
WLS15..0640..	566.4 mm (22.3 inches)	614 mm (24.17 inches)	640 mm (25.2

Performance Curves

Optical data shown below is for daylight white only. To get lux and candela values for warm white multiply the values shown on the charts by 0.933.

WLS15 BSZ High-Intensity LED Strip Light Instruction Manual

Accessories

Cordsets
Use single-ended cordsets between the power source and the quick-disconnect connection of a stand-alone light or the first light in a cascade. Use double- ended cordsets between lights in a cascade.

LMBWLS15

Stainless steel clip bracket
Includes 3 clip brackets and 2 plastic spacers
Clearance hole for M5 hardware

LMBWLS15-150S

Set of 2 stainless steel swivel bracket, allows for 150° of movement
Clearance hole for M5 button head screw

LMBWLS15MAG

Set of 2 brackets
Magnetic mounting bracket for attachment to steel and iron surfaces

LMBWLS15TD

Includes 4 100 mm (4 in) strips of 3M™ Dual Lock™ reclosable fasteners
Recommended for mounting to metal and plastic surfaces
Strong, pressure-sensitive adhesive bonds on contact

LMBWLS15TF

Includes 2 100 mm (4 in) strips of double-sided foam urethane strips
Acrylic adhesive provides high bond strength to most surfaces
Bonds to low surface energy plastics such as polypropylene and powder-coated paints

ACC-CAP M12-10

10 Caps
Seal and protect exposed, unterminated cascade quick disconnect connectors

Power Supplies
For use with cascades of lights that do not exceed a total maximum operating current of 4A (refer to maximum current specifications):

PSD-24-4

90 to 264 V AC 50/60 Hz input
Includes a 1.8 m (6 ft) US-style 5-15P input plug
24 V DC UL Listed Class 2 M12 connector output
4 A total current

For use with all non-cascaded lights or cascades of lights that do not exceed a total maximum operating current of 1A (refer to maximum current specifications):

PSW-24-1

24 V DC, 1 A Class 2 UL Listed power supply
100 V AC to 240 V AC 50/60 Hz input
2 m (6.5 ft) PVC cable with M12 quick disconnect
Includes Type A (US, Canada, Japan, Puerto Rico, Taiwan), Type C (Germany, France, South Korea, Netherlands, Poland, Spain, Turkey), Type G (United Kingdom, Ireland, Singapore, Vietnam), and Type I (China, Australia, New Zealand) AC detachable input plugs

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND INSTEAD OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER THE COURSE OF PERFORMANCE, COURSE OF DEALING, OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO THE BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify, or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents.

Document title: WLS15 BSZ High Intensity LED Strip Light, Instruction Manual
Part number: 233618
Revision: Original Instructions
Banner Engineering Corp. All rights reserved.