TAKSTAR WRAV1 Wireless Video Microphone User Manual

TAKSTAR WRAV1 Wireless Video Microphone

Specifications

• Brand: Takstar
• Model: V1 Wireless Video Microphone
• Applications: Live streaming, vlogging, filming, interviews

Product Usage Instructions

Transmitter

1. Power Button: Press and hold for 2 seconds to turn on/off the transmitter. Double-click while powered on to toggle between mute and unmute modes.
2. Display Screen: Provides real-time information such as battery levels, noise reduction mode, signal strength, volume level, pickup status, and channel settings.
3. Function Switch Button: Press to enable/disable noise reduction mode. Press and hold for 2 seconds to switch between mono and stereo modes.
4. dB Button: Press to adjust the volume level (0dB, 5dB, 10dB). Default is 5dB.
5. Type-C Interface: Connect to power source for charging. Supports OTG function for digital transmission with smartphones.
6. Belt Clip: Can be attached to a DSLR shoe mount for convenience.

Receiver

• Power Button: Press and hold for 2 seconds to turn on/off the receiver. Double-click while powered on to toggle between mute and unmute modes. Press and hold for 7 seconds when powered off to enter pairing mode.
• Display Screen: Shows battery levels, noise reduction mode, signal strength, volume level, pickup status, and channel settings.
• Function Switch Button: Enables/disables noise reduction mode. Press and hold for 2 seconds to switch between mono and stereo modes.
• dB Button: Adjusts volume levels (0dB, 5dB, 10dB).
• Type-C Interface: Connect for charging and supports OTG function for digital transmission with smartphones.
• Belt Clip: Attaches to a DSLR shoe mount.

Frequently Asked Questions (FAQ)

• Q: How can I charge the transmitter and receiver?
  A: Connect the Type-C interface of the transmitter and receiver to a power source using a Type-C data cable.

• Q: How do I toggle between mono and stereo modes?
  A: Press and hold the Function Switch Button on the transmitter/receiver for 2 seconds to switch between mono and stereo modes.

• Q: What do the different volume levels (0dB, 5dB, 10dB) signify?
  A: The volume levels indicate the intensity of the audio signal being transmitted. Adjust as needed based on the audio input.

Wireless Video Microphone
User Manual

Wireless Video Microphone

Preface
Dear Customer,
Thank you for purchasing Takstar V1 Wireless Video Microphone. To better understand and use the product, please read this manual thoroughly. If you have any questions or suggestions, please contact our local sales outlet.

Features

• Compact design for streaming, vlogging, filming, interviews on cameras/DSLRs/smartphones.
• 50m wireless range in open areas using 2.4GHz band.
• LCD screens on both receiver and transmitter for status overview.
• Built-in condenser mic with 3-level volume control for flexibility.
• Intelligent environmental noise reduction for cleaner audio.
• Mono/stereo mode switching on dual channel receiver.
• Use transmitter directly on lapel or with a wired external mic.
• Monitor audio in real-time via monitor output on receiver.
• Rechargeable lithium-polymer battery lasts up to 8 hours.

Applications
Live streaming, vlogging, filming, and interviews.

Specifications

Transmitter

• Modulation Type: Frequency Hopping/Digital FSK
• Transmit Power: 10dBm
• Ant enna Type: Ceramic Antenna
• Mic Pickup Pattern: Omnidirectional (Built-in mic and external lapel mic)
• Display Type: TFT
• Input Interface: Ø3.5mm TRS
• Battery Type: Built-in Li-Po
• Charging Interface: Standard Type-C, 5V
• Charger Specification: 5V 1A / 5V 2A / 5V 3A
• Charging Time: Approx. 1.5 hours
• Usage Time: Approx. 8 hours

Receiver

• Transmission Type: Frequency Hopping/Digital FSK
• Receiver Sensitivity: -86dBm
• Antenna Type: Ceramic Antenna
• Display Type: TFT
• Output Interface: Ø3.5mm TRS, Type-C Digital
• Battery Type: Built-in Li-Po
• Charging Interface: Standard Type-C, 5V
• Charger Specification: 5V 1A / 5V 2A / 5V 3A
• Charging Time: Approx. 1.5 hours
• Usage Time: Approx. 8 hours

Overall System

• Audio Frequency Response: 60Hz-20kHz
• Signal-to-Noise Ratio: 82dB (circuit performance)
• Max Input Sound Pressure: 97dB SPL (Built-in mic)
• Pairing Method: Automatic
• Effective Range: 50 meters (in open areas)

Note: The above data are measured by Takstar laboratory which has the final interpretation right!

Function Descriptions

Receiver

1. Power Button: Press and hold for 2 seconds to turn on/off the receiver. While powered on, double-click to toggle between mute and unmute modes.
   While powered off, press and hold for 7 seconds to enter pairing mode.

2. Display Screen: Shows real-time info such as battery levels of the receiver and transmitter, noise reduction mode, signal strength, volume level, pickup status, and channel settings.

3. Function Switch Button: Press to enable/disable noise reduction mode. Press and hold for 2 seconds to switch between mono and stereo modes (Mono mode by factory default).

4. dB Button: Press to adjust the volume level. Three volume levels available: 0dB, 5dB, and 10dB, which cycle in sequence. 5dB by factory default (medium level).

5. Ø3.5mm Audio Output: Connect audio devices such as DSLRs or audio interfaces using a Ø3.5mm audio cable for audio output.

6. Type-C Interface: Connect the receiver to a power source using a Type-C data cable for charging. This interface also supports OTG function, allowing seamless digital transmission when connected to Apple or Android smartphones using an OTG data cable, enabling simultaneous charging and transmission.

7. Ø3.5mm Monitor Output: Insert a Ø3.5mm TRS/TRRS headphone for real-time monitoring.

8. Belt Clip: Can be attached to a DSLR shoe mount.

Receiver Display Screen

1. dB Volume Display: Shows three volume levels: 0dB, 5dB, and 10dB. The volume bar is gray when set to 0dB, half blue when set to 5dB, and fully blue when set to 10dB.

2. OTG Icon: Appears when connected via OTG and disappears when not.

3. Noise Reduction Icon: appears when enabled and disappears  when disabled.

4. Channel Info: Shows mono icon when in mono mode, where  audio is recorded identically to both left and right channels, regardless of which transmitter picks up the audio.
   Shows stereo icon when in stereo mode, where audio pickup from  transmitter mic 1/2 is recorded to left/right channel respectively.

5. Mic Status: indicates that the mic is muted, and indicates unmuted.

6. Channel Indicator: Displays the channel of the transmitter. When using two transmitters simultaneously, one is assigned to Channel 1, and the other to Channel 2. When pairing with a single transmitter, Channel 1 is prioritized for pairing.

7. Mic Signal: Shows the strength of the mic signal. When mic signal is lost, the mic battery level and dynamic volume meters disappear as well.

8. Battery Level: Displays the battery status of both the receiver and transmitter. Turns red when low battery and requires prompt charging. Shows a lightning symbol during charging, and turns green in full bars when fully charged.

9. Mic Volume Meter: Shows the real-time volume level of the transmitter. If the volume is too high and causes distortion, the volume meter will jump to red at the end. Green indicates normal pickup, yellow indicates pre-clipping, and red indicates clipping.

Transmitter

1. Power Button: Press and hold for 2 seconds to turn on/off thetransmitter.
   While powered on, double-click to toggle between mute and unmute modes.
   While powered off, press and hold for 7 seconds to enter pairing mode.

2. Display Screen: Shows real-time info about the transmitter’s battery level, noise reduction mode, signal strength, volume level, and pickup status.

3. Built-in Mic: Built-in condenser mic is used for audio pickup if no external wired mic is connected.

4. External Mic Input: Standard Ø3.5mm TRS mic input that provides 2.5V plug-in power for compatible mics.

5. Type-C Interface: Connect the transmitter to a power source using a Type-C data cable for charging.

6. Belt Clip: Can be attached to clothing collars.

Transmitter Display Screen

1. Noise Reduction Icon: appears when enabled and disappears when disabled.
2. Channel Indicator: Displays the channel of the transmitter. When using two transmitters simultaneously, one is assigned to Channel 1, and the other to Channel 2. When pairing with a single transmitter, Channel 1 is prioritized for pairing.
3. Mic Signal: Shows the strength of the mic signal. When mic signal is lost, the mic battery level and dynamic volume meters disappear as well.
4. Battery Level: Battery Level: Displays the battery status of the transmitter. Turns red when low battery and requires prompt charging. Shows a lightning symbol while charging, and turns green in full bars when fully charged.
5. Mic Status: indicates that the mic is muted, and indicates unmuted.
6. Mic Volume Meter: Shows the real-time volume level of the transmitter. If the volume is too high and causes distortion, the volume meter will jump to red at the end. Green indicates normal pickup, yellow indicates pre-clipping, and red indicates clipping.

Operating Instructions

A. Pairing Method
The product comes pre-paired and will automatically connect upon powering on. However, if you need to re-pair the devices due to special circumstances, please follow the steps below:

1. Press and hold the power button on the receiver for 7 seconds to enter pairing mode. During pairing, the screen will show a flashing icon and prompt about “Pairing” as shown below.
2. Press and hold the power button on the transmitter for 7 seconds to enter pairing mode. During pairing, the screen will show a flashing icon and prompt about “Pairing” as shown below.
3. Pairing is successful once both the receiver and transmitter screens display “Pairing successful”, as shown below.
4. If the receiver or transmitter displays “Pairing failed”, please retry the afore pairing steps.
5. Both mics are shown as TX. They have memory function, which retains the pairing settings from the previous power cycle.

Note: To clear pairing history and re-pair, press and hold the power button for 7 seconds continuously without releasing while powered off. If you have pressed the button for over 2 seconds but released before reaching 7 seconds, it will only power up the device.

B. Device Connection and Usage

Transmitter

1. Using the Built-in Mic
   Attach the transmitter directly to the collar using the belt clip. To install the furry windscreen, align the tabs on the windscreen with the groove on the transmitter and rotate clockwise to tighten it.

2. Using an External Mic
   Insert the plug of the Ø3.5mm lapel mic into the mic input interface of the transmitter. Clip the transmitter to your belt and attach the lapel mic on the collar.

3. Connection with Audio Interface
   Use the included 3.5mm audio cable. Connect one end to the audio output port on the receiver, and the other end to the 3.5mm mic input on your audio interface. This will route the audio output to the audio interface.

Receiver

1. For Use with a Camera
   Securely mount the receiver onto the camera shoe mount using the belt clip. Connect one end of the provided Ø3.5mm audio cable to the output interface of the receiver, and connect the other end to the camera’s mic input. Optionally connect headphones for monitoring.

2. For Use with a Smartphone
   iOS System

3. Attach the receiver to the phone holder using the belt clip. Connect the receiver to the phone using the provided Apple OTG cable.

4. Swipe down the upper right corner of the phone screen to access the settings interface. Then, tap the window with the icon in the upper right corner.

5. Check if the speaker device is TAKSTAR V1 in the dialog box. If it is, connection is successful, as shown.

Note: You can charge both the receiver and your phone while simultaneously using the devices, by connecting a Takstar C2-5 OTG data cable (not included) as shown below.

Android System

1. Attach the receiver to the phone holder using the belt clip. Connect the receiver to the phone using the provided Android OTG cable.
2. This wireless video mic is compatible with most Android smartphones with OTG function. However, please note that some phone models and apps may restrict OTG function. This is not a product quality issue. Please consult your mobile device supplier to confirm if your phone supports OTG functionality. For certain brands like OPPO and VIVO, you may need to enable the OTG function for proper usage.
3. For Use with a Computer
4. Insert one end of the provided Android OTG cable into the Type-C interface of the receiver, and connect the other end to the computer. Use a USB adapter if necessary. The computer will automatically recognize the driver.
5. Right-click on the speaker icon in the bottom right corner of your desktop and select Open Sound Settings.
6. Click Sound Control Panel to access the Sound settings. Then, select the Recording tab and set TAKSTAR V1 as the default device. Speak into the transmitter mic to test if the mic is working properly, the volume bar should fluctuate as you speak.

Safety Instructions

To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use:

1. Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to proper level during operation. Do not operate at over-power or high-volume level for extended time to avoid product malfunction.
2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the local after-sales service for repair.
3. Power adapter used, if any, should be approved by CCC certification or similar standards and comply with the power supply requirements.
4. Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.
5. The product must, when installed on walls or ceilings, be fixed firmly in place at adequate strength to prevent from falling.
6. Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accident.
7. Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local after-sales service.

Label Meanings

This device is compliant with the limits of the European Council Directive on the approximation of the laws of the member states relating to electromagnetic compatibility according to RL2004/108/EG and European Low Voltage Directive RL2006/95/EG.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the complying party may cause the user to lose permission to operate the device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: WRAV1

This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with WEEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

About This Manual
This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. Also, specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local sales outlet. For the latest version/more information, please visit our website: https://www.takstar.com/
Copyright ©2024 TAKSTAR. TAKSTAR, 得胜 and their respective logos are registered trademarks or trademarks of Guangdong Takstar Electronic Co., Ltd. in the PRC, and/or other countries. All other trademarks are the property of their respective owners.

References

• 得胜官网-广东得胜电子有限公司

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>