RemoteTech RT-HK4F11 Electronic Key User Manual
- June 12, 2024
- RemoteTech
Table of Contents
RemoteTech RT-HK4F11 Electronic Key
Product Information
- FCC ID: 2AOKM-HK14
- IC: 24223-HK14
- Model: RT-HK4F11
- Part Numbers:
- RT-D5310
- RT-G2010
- RT-G2500
- RT-G2000
- RT-D3110
- RT-D3100
Product Usage Instructions
This electronic key remote provides the following functions:
- LOCK Button: Pressing this button locks all the doors of the vehicle.
- UNLOCK Button: Pressing this button unlocks the driver’s door. Pressing it again within 5 seconds unlocks the other doors.
- Liftgate Unlock Hold Button: Press and hold this button to open the trunk or hatch if the vehicle is equipped with a power liftgate.
- PANIC HOLD Button: Pressing this button activates the alarm system, causing the vehicle to sound the horn and flash the hazard lamps. To stop the alarm, press any button on the electronic key.
Please note the following:
-
This device complies with part 15 of the FCC Rules.
-
Operation is subject to the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including
interference that may cause undesired operation.
-
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
User’s Manual Electronic Key
- FCC ID: 2AOKM-HK14
- IC: 24223-HK14
- MODEL: RT-HK4F11
PART NUMBER:
RT-D5310,RT-G2010,RT-G2500,RT-G2000,RT-D3110, RT-D3100
This remote has lock, unlock, Liftgate Unlock Hold Button and panic buttons;
you can lock and unlock the vehicle doors and trunk/hatch with the remote
transmitter.
BUTTON FUNCTION
LOCK Button:
When you press the LOCK button, it locks all the doors.
UNLOCK Button:
Pressing the button unlocks the driver’s door. Pressing the button again
within 5 seconds unlocks the other doors.
Liftgate Unlock Hold Button:
Press and Hold. Will open if equipped with power liftgate
PANIC HOLD Button:
When you press the PANIC button, the vehicle will start sounding the horn and
flushing the hazard lamp. To stop the alarm, press any button on the
electronic key.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: