FORTIN EVO-ALL Immobilizer Bypass Installation Guide

REV.: 20231220
GUIDE # 113431
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

EVO-ALL Immobilizer Bypass

TOYOTA
Corolla| H-Key| 2024

Vehicle functions supported in this diagram (functional if equipped)

MANUFACTURED AFTER: 2019

FIRMWARE VERSION VERSION LOGICIELLE
88.[22] MINIMUM

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

| UNIT OPTION| DESCRIPTION
---|---|---
Program bypass option:| C1| OEM Remote status (Lock/Unlock) monitoring
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11 | Hood trigger (Output Status).
Program bypass option
(If equiped with OEM alarm):| D2| Unlock before / Lock after (Disarm OEM alarm)

Parts required (Not included)
1X 5 Amp Fuseode

MANDATORY INSTALL

* HOOD PIN

HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

This guide may change without notice. See www.fortin.ca for latest version.

DESCRIPTION

*TPMS: CONNECTION ONLY REQUIRED IF REMOTE START CONTROL FROM OEM REMOTES IS DESIRED AND VEHICLE IS EQUIPPED WITH TIRE PRESSURE MONITORING SYSTEM (TPMS).

WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)
FLASH LINK UPDATER,
FLASH LINK MANAGER
SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection
Ordinateur Microsoft Windows avec connection Internet

OR

FLASH LINK MOBILE
FLASH LINK MOBILE APP
Smartphone Android or iOS with Internet connection (Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

| Press and hold the programming button:
Connect the 4-Pin Data-link connector.
The LEDs will alternate between BLUE, RED,YELLOW & BLUE/RED flashes.
---|---
| Release the programming button when the LED is BLUE.
If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.
| Insert the required remaining connectors.
| Turn the key to the Ignition ON/RUN position.
↳ The BLUE LED will flash rapidly.
Wait,
↳ The BLUE LED will turn ON solide.
| Start the vehicle.
↳ The BLUE LED will turn OFF.
↳ The RED LED will turn ON.
| Turn the key to the OFF position.
Remove the key from the ignition switch.
| Start the vehicle.
↳ The RED LED will turn OFF.
↳ The YELLOW LED will turn ON.
Wait,
↳ The RED and YELLOW LEDs will alternate.
| Turn the key to the OFF position.
| Disconnect all the connectors and after the Data-Link (4-pins) connector.
| Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
*Parts required (not included)
| AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.
The module is now programmed.| REMOTE STARTER / ALARM VERIFICATION PROCEDURE
Test the remote starter. Remote start the vehicle.

REMOTE STARTER FUNCTIONALITY

| All doors must be closed.
---|---
| Remote start the vehicle.
| Unlock the doors with the remote-starter remote or the OEM remote.
| Insert and Turn the key to the Ignition ON/RUN position.
| Press the brake pedal.
| The vehicle can now be put in to gear and driven.

Module label

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>