SIGOR Nivo LED Swiveling Ceiling Light Instruction Manual
- August 31, 2024
- SIGOR
Table of Contents
Installation Instructions
4810001 Nivo® Surface-mounted luminaire swiveling 36° black
4810101 Nivo® Surface-mounted luminaire swiveling 36° weiß
4810201 Nivo® Surface-mounted luminaire swiveling 50° black
4810301 Nivo® Surface-mounted luminaire swiveling 50° weiß
Nivo ® Surface-mounted luminaire swiveling
Before starting work
4810001 Nivo® Surface-mounted luminaire swiveling 36° black 4810101 Nivo® Surface-mounted luminaire swiveling 36° weiß 4810201 Nivo® Surface-mounted luminaire swiveling 50° black 4810301 Nivo® Surface-mounted luminaire swiveling 50° weiß Please read and follow this installation and operating manual carefully. The installation of this luminaire must be carried out by an electrician for your safety. Follow safety and health regulations for all activities, especially the relevant selection of VDE 0100. Before starting the installation, isolate the relevant part of the system following the five safety rules. Check the luminaire for integrity before commissioning, only operate undamaged products!
Intended Use
The Nivo® Surface-mounted luminaires ensure protection class IP30 and are
intended for mounting on stable and load-bearing surfaces indoors at ambient
temperatures of -20 to +40°C with 220-230 V 50Hz AC. Proper use also includes
observing all information in this manual, especially the safety instructions.
Note: The luminaires are not intended to be covered with insulating
material such as mineral wool. Any other use is considered improper and may
result in property or personal damage. Use the included cotton gloves for
installation.
Non-user-replaceable light source
The light source of this luminaire may only be replaced by Sigor Licht GmbH or
an authorized service technician or a similarly qualified person. (EN 60598-1
3.3.21)
Caution! Risk of electric shock.
Disposal
Sigor luminaires are RoHS compliant and should be returned to their dealer or
an electronic waste collection point at the end of their life. Do not dispose
of them in household waste .
Scope of delivery
– Nivo® Surface-mounted luminaire with 5 years Sigor functional guarantee
– 2 screws, 2 dowels for concrete or masonry
– 2 screws, 2 dowels for drywall
– This installation and operating manual
– Cotton gloves
Disclaimer
Note: In case of non-compliance with this manual and improper use, there
is no warranty claim, and Sigor Licht GmbH assumes no liability in such cases.
This manual is an integral part of the product and must be included in the
construction documentation
Installation
- Mount the housing base on a level and solid foundation. Adjust the included mounting material if necessary for different surfaces.
- With mounting options on all installation boxes Ø 68 mm.
- Create a 230 V connection, observing occupational safety. The clamps can be unlocked with the brackets. Operation only with locked brackets.
- Connect the plug and coupling of the secondary side.
- Insert the insert (b) into the fit of the housing base (a), press it down, and rotate it about 20° to the click with a right turn (c). The correct position is marked with arrows. [6] To open, press the insert down slightly and turn it about 20° counterclockwise out of the lock. The insert can now be removed. Tip: Rotate the insert to lock or unlock it up to the respective stop.
Lens Replacement
The lens insert (a) is held in the luminaire by three magnets; with a slight
rotation of the lens insert in the luminaire (b), the magnets separate, and
the lens insert (b) falls out.
Warning The luminaire head can become hot up to 60°C during operation.
Please wait a moment after switching off or use the included gloves to work on
the luminaire immediately.
Disposal Instructions according to ElektroG
«Owners of old devices must dispose of them separately from unsorted municipal
waste. Old devices must not be disposed of with household waste but through
special collection and return systems.
Owners of old devices must separate batteries and accumulators not enclosed by
the old device, as well as lamps that can be removed from the old device
without destruction, from the old device before handing it over to a
collection point.
This does not apply if old devices are handed over to public-law waste
disposal authorities and are separated there for the purpose of preparing them
for reuse. Owners of old devices from private households can hand them in free
of charge at the collection points of public-law waste disposal authorities or
at the collection points set up by manufacturers and distributors in
accordance with the ElektroG.
An online directory of collection and return points can be found here:
https://www.e-schrott-entsorgen.org/
Some old devices contain sensitive personal data, especially devices in
information and communication technology such as computers and smartphones. It
is in your own interest to ensure that you are responsible for deleting the
data on the old de- vices to be disposed of. The symbol of a crossed-out
dustbin on electrical and electronic equipment means that the device must be
disposed of separately from unsorted municipal waste at the end of its service
life.”
Warranty Conditions
The warranty is exclusively for consumers. Warranty protection applies only to
products purchased within the Federal Republic of Germany. The warranty period
begins on the invoice date.
If material or manufacturing defects in the goods you purchased arise during
this period and affect the function of the product, we will provide you with a
new, defect-free product as part of this warranty. This does not apply in the
case of a battery performance fault. In the event of a warranty claim, please
contact us as the warranty provider: Sigor Licht GmbH Phone: +49 2339 1261 0
Eichenhofer Weg 81 Email: reklamation@sigor.de
42279 Wuppertal
Warranty claims are excluded for damage to the goods due to normal wear and
tear and improper or non-intended use or treat- ment. A prerequisite for
claiming warranty service is that you enable us to examine the warranty case
(e.g., by sending the goods).
If you send the goods for this purpose, please ensure that damage to the goods
during transport is avoided through appropriate packaging. A copy of the
invoice must be included with the goods shipment for the warranty claim to be
reviewed, so we can verify whether the warranty period has been adhered to.
Alternatively, you can send the copy of the invoice to us by email. We reserve
the right to reject the warranty service if it cannot be determined whether
the warranty period has expired. There are no shipping costs for justified
warranty claims. In this case, we will refund any shipping costs for the
return of the defective goods and bear the costs of shipping a new, defect-
free product to you.
Important Note: This warranty does not limit your statutory rights.
Instead, the warranty promise is separate from the statutory warranty rights
to which you are entitled free of charge.
Sigor Licht GmbH Eichenhofer Weg 81 42279 Wuppertal Germany
Tel. +49 2339 1261-0
Fax +49 2339 1261-61
www.sigor.de info@sigor.de
01/2024
Rechte und Änderungen vorbehalten 3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>