SIGOR 4815001 Recessed Mount Drywall Ring Instruction Manual
- May 15, 2024
- SIGOR
Table of Contents
4815001 Recessed Mount Drywall Ring
Instruction Manual
Recessed Mount Drywall Ring
Installation Guide
4815001 Recessed Mount Drywall Ring
Installation Instructions
Nivo ® Recessed Mount
Drywall Ring
4815001 Nivo® Recessed Mount Drywall Ring 115 mm
4815101 Nivo® Recessed Mount Drywall Ring 147 mm
The Signor Drywall Recessed Mount is designed for embedding in drywall panels
using standard adhesive. The recessed lights from the Nivo lighting series can
be seamlessly and flush-mounted into the surface, creating a particularly
spectacular effect.
To be used with lights with @ 111 mm:
4811401 Nivo® Recessed Built-in Light fixed 111mm 36° black
4811501 Nivo® Recessed Built-in Light fixed 111mm 36° white
4811601 Nivo® Recessed Built-in Light fixed 111mm 50° black
4811701 Nivo® Recessed Built-in Light fixed 111mm 50° white
4811001 Nivo® Swiveling Recessed Built-in Light 111mm 36° black
4811101 Nivo® Swiveling Recessed Built-in Light 111mm 36° white
4811201 Nivo® Swiveling Recessed Built-in Light 111mm 50° black
4811301 Nivo® Swiveling Recessed Built-in Light 111mm 50° white
4812401 Nivo® Pendant Light Recessed Installation 36° black
4812501 Nivo® Pendant Light Recessed Installation 36° white
4812601 Nivo® Pendant Light Recessed Installation 50° black
4812701 Nivo® Pendant Light Recessed Installation 50° white
To be used with lights with @ 142 mm:
4810401 Nivo® Swiveling Recessed Built-in Light 142 mm 36° black
4810501 Nivo® Swiveling Recessed Built-in Light 142mm 36° white
4810601 Nivo® Swiveling Recessed Built-in Light 142mm 50° black
4810701 Nivo® Swiveling Recessed Built-in Light 142 mm 50° white
Disposal
Sigor lights are RoHS compliant and should be returned to your dealer or an
electronic waste collection point at the end of their life. Please do not
dispose of them in household waste.
Scope of Delivery
– Nivo ® Recessed Mount Drywall Ring
– These installation and operating instructions
Disclaimer
Note: In case of non-compliance with these instructions and improper use, no warranty claim exists. Sigor Licht GmbH assumes no liability in such cases.
Installation
- Gypsum board thickness 9-25 mm. Create ceiling cutout accordingly with 120 or 150 mm diameter.
- Use the support plate as a template for drilling holes. Center the ring flush with the cutout.
- Create drill holes. Insert the support plate.
- Secure the support plate with the included M4 flathead screws.
- Install the recessed ring.
- Align and secure the recessed ring.
- Fill any gaps with suitable filler material.
- Paint the ceiling.
Sigor Licht GmbH
Eichenhofer Weg 81
42279 Wuppertal Germany
Tel. +49 2339 1261-0
Fax +49 2339 1261-61
www.sigor.de
info@sigor.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>