VigilLink VLSW-41H20R 4X1 HDMI2.0 Switch with Audio ARC 18Gbps User Manual
- June 3, 2024
- VigilLink
Table of Contents
VigilLink VLSW-41H20R 4X1 HDMI2.0 Switch with Audio ARC 18Gbps
Thank you for purchasing this product
Please read these instructions carefully for optimum performance and safety before connecting, operating, or adjusting this product. Please keep this manual for future reference.
Introduction
This high-performance HDMI 4×1 switcher supports HDTV formats up to 4Kx2K@60Hz and all HDMI 3D TV formats. It can extract HDMI stream audio to separate digital and analog audio output. This product supports HDCP repeater/CEC/ARC functions. Select any inputs by the front panel button or IR Remote; the corresponding indicator LED on the front panel will be illuminated.
Package
- 1 x HDMI 4×1 Switcher
- 1 x 5V/1APower Adapter
- 1 x 38KHz IR Rx cable
- 1 x Optical convert header (for SPDIF audio output)
- 1 x HDMI 4×1 IR Remote
- 1 x Operation Manual
Features
- Compliant with HDMI 2.0a, DVI 1.0 standards
- HDCP 2.2 and HDCP 1.4 compliant
- Video formats up to 4Kx2K@60 and all HDMI 3D video formats
- Supports PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH
- Digital and analog audio output
- Supports innovative EDID management (Auto/2CH/5.1CH/7.1CH selectable)
- Supports input port auto-switching or manual switching mode
- Audio Return Channel (ARC) supports
Specifications
Technical
Frequency Bandwidth| 18Gbps
HDCP Compliance| HDCP 1.4, 2.2
ESD Protection| Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Connection
Input Ports| 4 HDMI Female ports, 1 IR Receive port and 1RS232
port
Output Ports| 1 HDMI Female port and 1 L/R & Optical port
HDMI Audio Output| PCM2.1/5.1/7.1CH,Dolby5.1, DTS5.1, Dolby-
TrueHD, DTS-HD
Mechanical
Dimensions (mm)| 180 (D) x85 (W) x 11.6 (H)
Weight| 300g
Power Consumption| Max 2.5 W
Operating Temperature| 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature| -20˚C ~ 60˚C / -4˚F ~ 140˚F
Switcher Operation controls and Functions
Front Panel
- Input indicator LED, the corresponding port LED will be illuminated when its port is selected.
- Auto or manual select button:
- Press this button for>2 seconds to select auto-switching or manual-switching mode.
- Under manual switching mode, short pressing this button to select the input port.
- EDID status LED (Auto means using TV EDID).
- EDID select button (Press this button to choose EDID mode Auto/2.1CH/5.1CH/7.1CH)
- ARC status LED (this LED will be illuminated if ARC is enabled successfully)
- ARC function on/off button
Rear Panel
- HDMI output port, connect with HDTV or monitor by HDMI cable
- HDMI input ports, connect with DVD, PS4, or Set-top Box HDMI cable
- Audio output (including L/R analog and optical audio out)
- RS232 port
- IR receiver port
- DC 5V input port
IR Remote
- ARC: Press this button to enable or disable the ARC function. ARC LED on the front panel will be illuminated if the ARC function is enabled successfully.
- Auto/2.1ch/5.1ch/7.1ch: Press these buttons to select different EDID settings, and the corresponding LED on the front panel will be illuminated.
- Auto Source: Press this button to select auto-switching or manual switching mode.
- In1/In2/In3/In4: Under manual switching mode, press this button to select the input port.
Application Example
