CombiSteel 7526.0300, 7526.0305 Backbar Cooler User Manual

CombiSteel 7526.0300, 7526.0305 Backbar Cooler

Specifications

• Product: Backbar Cooler
• Models: Various models available
• Manufacturer: combisteel.com
• Intended Use: Storage and display of beer and beverages

Product Usage Instructions

Safety Precautions
Before operating the unit, read and adhere strictly to the safety precautions provided in the user manual.

Precautions for Installation
WARNING: Installation should only be performed by a dealer or a qualified expert to avoid water leakage, refrigerant leakage, electrical shock, or fire.

Precautions for Use
WARNING: All repairs, disassembly, and modifications should be done by qualified technicians to prevent fire, malfunction, and injury.

Additional precautions for use

• Do not splash water directly onto the product to avoid short-circuit and electrical leakage.
• Avoid putting flammable or volatile substances into the unit to prevent explosion and fire.
• Avoid damaging or modifying the power cord to prevent electrical shock or fire.
• Use a dedicated wall outlet; do not use extension cords to avoid electrical shock, overheating, and fire.
• Avoid using flammable spray cans near the unit to prevent explosion and fire.
• Use the cooler only for storing and displaying beer and beverages for sale.

FAQs

• Q: Can I install the backbar cooler myself?
  

  • A: No, installation should be performed only by a dealer or a qualified expert to avoid potential risks like water leakage, refrigerant leakage, electrical shock, or fire.

• Q: What should I do if I encounter a malfunction with the cooler?
  

  • A: All repairs, disassembly, and modifications should be done only by qualified technicians to prevent fire, malfunction, and injury. Do not attempt to fix it yourself.

Backbar Cooler
User Manual

Models : 7526.0300 – 7526.0305

Please read these instructions completely before operating the units.

SAFETY PRECAUTIONS

• To ensure proper use, please thoroughly study these SAFETY PRECAUTIONS before operating the unit.
• The purpose of the safety precautions in the manual is to ensure safe and correct use of the unit to minimize risks that could cause serious damage and injury to you or other persons. The safety precautions provided are divided into WARNINGS and CAUTIONS. Cases where improper handling of the unit could lead to death or serious injury are listed under the “WARNING” heading. However, the cases listed under the “CAUTION” heading could also lead to serious results. To ensure the safety, adhere strictly to both types of safety precautions.

WARNING Improper handling of the unit could lead to death or serious injury.

CAUTION Improper handling of the unit could lead to serious results depending on the circumstances.

• Text set off by the exclamation mark contains information that should be strictly adhered to.
• After reading the instruction manual, store it in an easily accessible place where the user(s) of this product can easily find it.

PRECAUTIONS FOR INSTALLATION

WARNING

Installation should be performed only by the dealer or a qualified expert. Attempting to install the unit yourself could result in water leakage, refrigerant leakage, electrical shock or fire.

PRECAUTIONS FOR USE

WARNING

All repairs, disassembly and modifications should be performed only by qualified technicians. Attempting to perform these yourself could result in a fire, malfunction and injury. Never splash water directly onto the product or wash with water as short-circuit and electrical leakage could result.

Never put flammable or volatile substances into the unit as explosion and fire could result. Do not damage, modify, excessively bend, strain, twist or bundle up the power cord. Also, placing heavy objects on the power cord or squeezing it in a tight place could damage it, possibly resulting in electrical shock or fire. Use a dedicated wall outlet. Do not use extension cords or convenience receptacles as this could result in electrical shock, overheating and a fire. Never use flammable spray cans or leave flammable substances near the unit. Sparks from electrical switches could result in explosion and fire.

The cooler is intended for storage and display of beer and beverages for sale. Do not use for other purpose than the intended as this could adversely affect items placed in the unit.

• Never attempt to insert fingers, sticks, etc. into the cold air suction outlet.
  A circulation fan is rotating at high speed inside the outlet. Injury, electrical shock and improper operation could result.

• For indoor use only. Using the unit in a location exposed to rain could result in electrical leakage and electrical shock.

• Never place heavy objects or items containing water on top of the unit. Objects could fall down and cause injury and spilled water could deteriorate the insulation of electrical components and result in electrical leakage.

• Install the unit in a location where the floor is sturdy enough to support the load of the unit. If the floor is not sturdy enough or installation is incorrectly performed, the unit could tip over and falling shelves and products could cause personal injury.
• If you find gas leakage, please don’t touch the cooler, and close gas and open the door for ventilation. Gas leakage can cause explosion, fire and fire injury.
• Store the unit in a location where it is not exposed to rain. Using a unit that has been exposed to rain could result in electrical leakage and electrical shock.
• Away from hot air sources. Cooling performance is reduced if the unit is placed near heat sources such as hot plates and stoves and if it is exposed to direct sunlight.

• Leave disassembly and disposal of the unit to qualified experts.

• Should the unit need temporary storage, make sure not to store the unit in a location where children play and take precautions so that the door cannot be completely closed. This will minimize the risk that a child becomes trapped inside the compartment.

• WELL VENTILATED PLACE
  Please leave more than 10cm space between chest freezer and wall. If there is no space, cooling capacity can drop down.

• If installation in a damp location is unavoidable, also install an electrical leakage circuit breaker. If no electrical leakage circuit breaker is installed, electrical shock could result.

• Never hang from the door or climb onto the unit. The unit could tip over or fall and cause material damage or injury.

• Disconnect the power cord plug from the wall outlet before moving the unit and make sure that the power cord is not damaged during transport. A damaged power cord could result in electrical shock and/or fire.

• Grasp the handle when closing the door. Holding at other positions could result in pinched fingers and injury.
• Do not push hand against or apply excessive force to glass surfaces as the glass could break and cause injury.
• When disconnecting the power cord plug from the wall outlet, hold at the plug main body close to the outlet. Pulling the cord could cause wire breakage, possible resulting in overheating and fire.
• Make sure that the unit does not tip over or fall when it is moved. A falling unit could cause serious injury.
• Do not throw items onto the shelves and do not place items totaling more than 30kg on each shelf. The shelf could fall down, possibly cause injury.
• Be sure to attach and secure shelves correctly. An improperly attached shelf could fall down and cause injury.

HOW TO USE

BEFORE USE

• Remove shipping package, tape, etc., and leave doors open for ventilation for a while.
• The unit is cleaned before shipment. However, clean the compartment interior once after delivery.
• Please insert power supply plug into the wall outlet, single-phase to cat voltage.
• Allow the unit to operate for about 1 hour to cool the compartment before placing items in the cooler.

WAIT 5 MINUTES OR MORE BEFORE RE-STARTING
Restarting the unit immediately after it has been turned off may cause fuses to blow and activate the circuit-breaker, the compressor may be overloaded and/or other damage may occur.

TEMPERATURE ADJUSTMENT
For showcase cooler, the interior temperature during fully loaded at factory default setting of position at 4-5 will be kept at 0-10°C. If the ambient temperature is extremely high or the stuffing food inside is too much, that might cause the interior temperature a little bit higher. So, it would be better turn the thermostat right so as to maintain the right temperature. On the opposite, if the ambient temperature is very low or empty loaded, or in less food storage, the interior temperature might be able to reach minus 0°C, and in return to cause the evaporator ice up; Thus, it would be better to switch the thermostat back to left so as to relieve something.

DRAIN TRAY

• Defrosting is performed automatically and drain water is collected in the drain tray.
• Water in the drain tray is evaporates automatically. In humid surroundings, there will be large amounts of water in the drain tray, so please throw away drain water once a day.

EFFICIENT USE
Please follow the instructions below, to save energy.

• To prevent cold air from escaping, open and close the door quickly and keep the door opened for as short a time as possible.
• Please install the unit in the place which is well-ventilated.

SHELF HEIGHT ADJUSTMENT
The shelf height can be adjusted. Arrange the shelves in accordance with the dimensions of the items to be placed in the cooler.

PLACING ITEMS IN THE SHOWCASE
This showcase employs a forced circulation of cold air system. If circulation of cold air is obstructed, the items will not be adequately refrigerated. Pay attention to the following points:

• Do not let items obstruct the cold air inlet and suction outlet.
• Place items so that they do not protrude from the shelves. The gap between the shelves and the door is used for circulation of cold air.
• Place items evenly on all shelves.
• Please do not display goods on the bottom. Please put goods on the shelf.

CLEANING

WARNING
To prevent any electrical shock hazards or injury by rotating circulation fan, always disconnect the power cord plug from the wall outlet before cleaning.

EXTERIOR AND COOLER COMPARTMENT
Wipe with a soft, dry cloth. If very soiled, wipe with a cloth that has been moistened with a detergent. Then wipe with a cloth that has been dipped in water.

WARNING
Do not splash water directly onto the cooler and do not wash with water. Short-circuiting and electrical shock could result.

• Clean the cooler regularly to keep it clean at all times.
• Never use polishing powder, soap powder, gasoline, oil or hot water as these will damage the painting and plastic components.

CHECKS AFTER CLEANING
To ensure the safety, perform the following checks after cleaning.

• Is the power cord plug firmly inserted into a dedicated wall outlet? Confirm that the plug is not abnormally hot.
• Check the power cord for cracks and damage. Should the slightest irregularity be observed, contact the dealer from whom you purchased this unit or our customer service.

TROUBLESHOOTING

Please check the following items if you encounter problems with the unit. If the problem continues after taking the proper remedial actions, disconnect the power cord plug from the wall outlet. Transfer the items stored in the cooler to a box or other container. Then contact the dealer from whom you purchased this unit and be ready to provide information as listed in the table below.

connections.
Poor electrical power| Check the power connection and electrical outlet.
Thermostat set to the minimum position| Adjust the thermostat setting to a higher number.
Not reaching the desired temperature| Unit is exposed to direct sunlight.| Relocate the unit to a shaded area.
Thermostat is not properly adjusted.| Adjust the thermostat setting to a higher number.
Door(s) not properly closed| Check the levelling of the unit and door seal.
Products poorly distributed or excess product load| Redistribute the product load according start instructions.
Clogged condenser| Clean the condenser.
Blocked grills| Clean the grills of any debris collected.
For models with electronic temperature controller, indicates E0 or E1.| Unplug the unit from the outlet. If the error continues, contact an authorized service technician.
Excessive noise| The unit is not properly levelled.| Level the unit, making sure all the feet are in firm contact with the floor.
Something is in contact with the appliance, e.g. boxes, mops, brushes, etc.| Keep the objects away from the appliance.
Water on the floor| Drain hose is outside of the drain pan.| Locate the hose in the drain pan.

References

• CombiSteel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>