SIGOR NUINDIE Charge LED Battery Table Lamp Instructions
- June 3, 2024
- SIGOR
Table of Contents
SIGOR NUINDIE Charge LED Battery Table Lamp
Use purpose
This product is meant to be used for lighting only. It must not be exposed to heavy mechanical load or strong pollution. The lamp is splash-proof according to protection class IP54.
Technical Specification
- Power: 2,2W
- Voltage: DC 3,7V
- Luminous flux: 212 Im
- Luminous colour: 2700K
- Number of LED: 23 pieces
- Capacity of rechargeable battery: 3 x 2200 mAH
- Charging time: ~9h
- Battery life: 20h/50% light power, 10h/100% light power
- Protection class: Il
- Iype of protection: IP54, splash water protected
- Dimmable: Yes
- Energy efficiency class: F
Charger
- Input: AC100-240V 50/60Hz
- Output: 5V/1A
- Length of cable: 1.2 m
Manual instructions
- Charge (the) battery before initial use.
- Touch the power switch to turn the light on /off.
- Press and hold the touch switch to gradually decrease the light intensity. After about four seconds the luminaire reaches its minimum light intensity. Press and hold the touch switch again to adjust the light intensity to increase again until the luminaire has reached its full brightness.
- While charging, the indicator light at the top shines red. When fully charged, it turns off.
- By pressing the switch on the bottom of the lamp head, you switch the charging function on / off.
DIMENSION
Important notice
- The support surface for the lamp must not exceed a 15° tilt or it will fall.
- The battery has overcharge protection.
- In case of need of repair, return to your local dealer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>