TRANSFORMERS TF-T50 True Wireless BT Headphones User Manual

TF-T50 True Wireless BT headphones user manual

Packing list

Product diagram

Warm reminders

1. Do not attempt to remove or replace any parts in the product except for the operation method specifically indicated in the instruction manual.
2. Do not put the product into water or any other liquids. This product is not waterproof.
3. If any quid accidentally enters the product, immediately disconnect and remove. the product.
4. To avoid electric shock, please make sure that your hands are not stained when installing or the product.
5. Do not place this product near the heat source or directly expose it to the fire source.
6. Do nat place this product in a strong tromagnetic environment, Shere the product to foil .

Product Specification

BT version: V5.4
Transmission distance: 210 meters
Music time: about 6 hours (80% volume)
Speaker size: O13mm
Charging time: about 1.5 hours
Battery capacity: 35mAh
Roted input:5V-==30mA

Specifcations of charging compartment

Battery capacity: 320mAh
Charging time: about 1.5 hours.
Rated input: 5V===300mA
Number of headphones available for charging: about 3 times
(All technical information is subject to actual performance)
To charge the charging compartment
The Type-C charging cable is connected to the charging compartment to the 5V power adapter.
Then the headphone battery announces a low-power reminder {sound prompt: battery low, once every minute), please charge the eadphonesin time.

LED indicates the status

Product how to instructions

1. Start up
   Method 1: Open the fid of the charging cose and turn on the headphones automatically.
   Method 2: Long press the left/right multi-function button for 5 seconds, and the headphones turn on.(Power-on tone: “power on”)

2. Shut down
   Method: Put it bock in the charging compartment, and the headphones wil automatically turn off.
   Method 2: The headphones will automatically shut down without connecting the device within 3 minutes. (Shut down tone: “power off”)

3. Pairing
   Step 1: After turning on, the left and right headphones wil automatically interconnect and enter the paring state with the mobile more (prompt tone: “pairing”)
   Step 2: Open the BT list of smart devices, search for “TF-150” ond connect
   Tips: When the left and t headphones ore not ed, please restore the factory setto thorn beck in the charging case ond then opens) the autocratic poling. oy nest Put

Touch operation

Restore factory settings

Method 1 Unconnected state: After 5 consecutive dicks on the left/right headphones, the white ight turns on for 1 second to tum off, clear the pairing information, turn off the left/right headphones;
Method 2 Power-on connection stotus: the left/right headphones ore repectedly cicked 5 times, ond the white light lasts for 10 seconds within 3 seconds to turn off for 1 second to dear the pawing information between the headphones and the BT device and then turn it off.
The name and content of harmful substances in the earbuds

This form is compiled in accordance with SJ/T 11364.
O:Indicates that the content of the hazardous substance in all homogeneous materials of the part is in below the limit required by GB/T 26572.
X:Indicates that the hazardous substance at least in a certain homogeneous material of the part exceeds The limit requirements specified in GB/T 26572.
The parts marked with °X”on the form are all harmful due to the limitations of global technological development. Substitution of substances.
Printed circuit board components:
Including printed circuit boards and their parts electronic components, etc and depending on the product model, the earbuds you purchased may not contain all the above components.
Electronic and electrical products sold in the People’ s Republic of China must mark this LOGO, the number in the logo represents the product under normal use Environmental protection use period.

Warranty statement

Disclaimer
This user manual does not have any form of guarantee, position expression or other implication The mentioned products specifications and information are for reference only and the content will also be updated on the web at any time without additional separate notice Warranty statement:
The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase(“Warranty Period” ),under normal conditions of use due to quality defects damaged, can be repaired. Free repair; free replacement if the manufacturer confirms that it cannot be repaired; repaired or re- placed product. Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days).Purchased by sale the ticket date shall prevail; if the purchase date cannot be determined, the warranty period shall be 13 (13) months
If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us. When applying for warranty, you need to provide an accurate, complete and clearly filled out valid sales invoice.
The above guarantee does not apply to the following situations:

1. Exceeding the validity period of the three packs;
2. Altering the warranty card and product code does not match the product body;
3. Causes caused by misuse abuse or improper transportation,use,maintenance or storage obstacles or damage;
4. Failure or damage caused by force majeure (such as earthquake, war disaster etc.) or accident bad;
5. The zipper and tower buckle are damaged due to excessive force;
6. Disconnection or tearing caused by excessive load,
7. Any damage caused vf sharp objects,
8. Products with signs of burning of flooding;
9. Damage caused by unauthorised disassembly;
10. Agi ng.discoloration,abrasion,ru pure and other losses that occur during the normal use of the product.
11. If the original identification table of the product is changed or damaged, this guarantee will become invalid.

The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee You should check on the spot and raise objections to any discrepancies.
The above guarantees are all guarantees we make regarding the products and are only applicable in mainland China Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.
Service supervision hotline: :400-885-8808

Warranty Service

Dear user this warranty card is the proof of your future warranty application please cooperate with the seller to fill it out and keep it for future use!

User info

User name| | Email|
Contac number| | Postal code|
Mailing address
Product information
Product name| | Product number|
Product barcode / Serial number / Batch number|
Vendor information

Name|
Address|
Contact number| | Postal code|
Sales date| | Invoice number|
Remark|

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance Ocm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>