TRANSFORMERS TF-T36 True Wireless BT Headphones Instruction Manual
- August 28, 2024
- TRANSFORMERS
Table of Contents
- TRANSFORMERS TF-T36 True Wireless BT Headphones
- FAQs
- Packing list
- Product diagram
- Product specifications
- Charging compartment specifications
- LED indicator lights and warning sounds
- Charging bin status
- Product operating instructions
- Touch operation
- Name and content of harmful substances in the product
- Warranty Statement
- Warranty card
- FCC
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TRANSFORMERS TF-T36 True Wireless BT Headphones
FAQs
Q: Can I modify the device without voiding its operation authority?
A: No, any changes or modifications not explicitly approved by the manufacturer could void your authority to operate this equipment.
Q: What are the compliance conditions for this device?
A: The device complies with FCC Part 15 rules, ensuring it does not cause harmful interference and accepts any interference received.
Q: How should I maintain the minimum distance between the radiator and my body?
A: To comply with radiation exposure limits, ensure there is a minimum of 0cm distance between the radiator and your body during installation and operation.
Packing list
Product diagram
- Charging compartment indicator
- Type-C charging port
- MFB key
- Headphone indicator
- Headphone charging contact
- Headphone-out port
Tips
- Do not attempt to disassemble or replace any parts inside the product, except for the operation methods specified in the manual.
- Do not put the product into water or any other liquid, as this product is not designed to be waterproof.
- If any liquid accidentally enters the product, please immediately disconnect and remove the product.
- To avoid electric shock, please ensure that your hands are not wet when installing or uninstalling the product.
- Please do not place this product near a heat source or directly expose it to a fire source.
- Do not place this product in an environment with a strong electromagnetic force, otherwise, it may cause product malfunction.
Product specifications
- Bluetooth version: 5.4
- Transmission distance: ≥ 10M
- Speaker diameter: 10mm
- Speaker impedance: 320
- Sensitivity: 1083dB @1kHz
- Frequency range: 20-20kHz
- Charging time: about 1.5 hours
- Music time: about 5 hours
- Battery capacity: 30mAh/3.7V
- Rated input: 5V === 30mA
Charging compartment specifications
- Battery capacity: 300mAh/3.7V
- Charging time: About 1.5 hours
- Rated input: 5V === 300mA
- (All technical information is subject to actual performance)
- Charge the charging compartment and connect it to a 5V power adapter using a Type-C charging cable. Reminder: When the battery level of the earphones is below 3.3V, a low battery reminder will be\ played (once every minute), and the earphone blue light will flash quickly.
LED indicator lights and warning sounds
Charging bin status
Product operating instructions
- Power on
- Method 1: Remove the headset from the charging compartment to switch on automatically.
- Method 2: Long press the left/right headphone function button for 3 seconds to switch on the phone.
- Power off
- Method 1: Put the earphones into the charging compartment and automatically shut them off;
- Method 2: If the headphones are not connected to the device after 3 minutes, they will automatically shut down.
- Pairing
- Step 1: Pair left and right earphones: Remove the earphones from the charging compartment and automatically pair them left and right.
- Step 2: After the left and right earphones are automatically paired successfully, they enter pairing mode and wait for the earphones to connect to the device.
- Step 3: Turn on the Bluetooth function of the device, select “TF-TO1 Pro” to connect, and if the device is not connected within 3 minutes, it will automatically shut down.
Touch operation
- Conventional mode
- Music Mode
- Talk mode
- Game/Music / transparent/normal mode
Name and content of harmful substances in the product
Warranty Statement
DISCLAIMER
No warranty, representation of position, or other implication of any kind is made in this manual. The products, specifications, and information mentioned in this manual are for reference only and are subject to change without notice. Warranty Statement. The products attached hereto are warranted as follows: If the product is damaged due to defects in quality under normal use within twelve (12) months from the date of purchase, the product will be repaired free of charge if it can be repaired, or replaced free of charge if it cannot be repaired as confirmed by the manufacturer, and the product will continue to be covered by the warranty for the remainder of the warranty period (a minimum of not less than 30 days) after the product is repaired or replaced. After repair or replacement, the product will continue to enjoy the warrantyduring the remaining warranty period (at least 30 days). The date of purchase is based on the date of the sales invoice. If the date of purchase cannot be determined, the warranty period will be calculated on the basis of thirteen (13) months from the date of manufacture of the product. For warranty claims, please call the product service hotline first and follow our instructions. To claim the warranty, you will need to provide a valid sales invoice that is accurate, complete and egibly filled out. The above warranty does not apply to the following.
- Exceeding the validity period of the three packages:
- Altered warranty card, product code does not match the product body
- Failure or damage caused by misuse, abuse, or improper transportation, use, maintenance, or storage.
- Failure or damage caused by force majeure (e.g. earthquake, war, fire, etc.) or accidents
- Damage to zippers, towers, or buckles due to excessive force
- Unraveling or tearing due to overloading.
- Any damage caused by sharp objects
- Products that show signs of burns or flooding.
- Damage caused by unauthorized modification.
- Aging, discoloration, wear and tear, cracks, and other wear and tear that occur during normal use of the product.
- This warranty will be void if the original labeling of the product is altered or destroyed
The product and the accompanying materials are complete and intact appearance is not within the scope of the warranty, you should receive the product on- site inspection and any discrepancies to raise objections.\ The above warranty is our entire warranty in respect of the product and applies only within mainland China. Nothing in this document affects the rights of consumers which cannot be excluded or restricted under the law. Email: service@qscxsm.com
Warranty card
Dear user, this warranty card is a proof of your future warranty application. Please cooperate with the seller to fill it out and keep it properly for future use!
FCC
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two
conditions: This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation. This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 0cm between the radiator and
your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>