NICREW Aquarium Volcano Ornament Kit Instruction Manual
- August 29, 2024
- NICREW
Table of Contents
NICREW Aquarium Volcano Ornament Kit
Product Information
Specifications:
- Product Name: Aquarium Volcano Ornament Kit
- Package List:
- 1 x Volcano Decoration
- 1 x Bubble Maker with Built-in LED Light
- 1 x Airline Tubing
- 1 x Power Adapter
- Warranty: 1-year limited warranty from the date of purchase
Product Usage Instructions
Installation:
- Place the Volcano Decoration in your aquarium according to your desired layout.
- Connect the Bubble Maker to the Volcano Decoration using the provided Airline Tubing.
- Plug the Power Adapter into a suitable power source.
- Turn on the Bubble Maker to create bubbles and activate the LED light.
Tips:
Ensure the air pump’s volume and pressure are suitable for the desired
bubble output area on the volcano decoration.
Maintenance:
Regularly clean the components to ensure proper functioning. Do not dispose
of the product as normal household waste; take it to your local refuse
collection site.
Limited Warranty:
NICREW products come with a one-year limited warranty. Contact
support@nicrew.com for replacement parts or
service within the warranty period.
FAQ (Frequently Asked Questions):
-
Q: How do I adjust the bubble output of the Bubble Maker?
A: You can adjust the bubble output by regulating the air pump’s volume and pressure. -
Q: Can I use this ornament kit in saltwater aquariums?
A: This kit is designed for freshwater aquariums only.
Important Safety Instructions
To guard against injury, basic safety precaution should be observed including the following:
- READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
- Ensure your hand is dry when inserting/removing the power cord from the receptacle.
- Never plug in a wet cord. If a plugged in unit or socket does get wet, DON’T touch it. Instead, promptly disconnect the fuse or circuit breaker that supplies power to the appliance.
- If the appliance show a any sign of abnormal water leakage, immediately unplug it from the power source. Carefully examine the appliance after installation. It should not be plugged in if there is water on the parts not intended to be wet.
- Close supervision is necessary when any appliance is used by or near children.
- The operating voltage must be compatible with the transformer voltage requirements.
- A G.F.C.I (Ground fault circuit interrupter) & surge protector is recommended for all electrical appliances.
- Alway unplug an appliance from the outlet when not in use, before putting on or taking off parts, and before cleaning. Never yank the cord to pull plug from the outlet. Grasp the plug and pull to disconnect.
- Make sure an appliance mounted on a tank is securely installed before operating it.
- Save these safety instructions.
Package List
- 1 x Volcano Decoration
- 1 x Bubble Maker with Build-in LED Light
- 1 x Airline Tubing
- 1 x Power Adapter
Installation
- Connect the airline tubing to airline inlet on the bubble maker.
- Choose a location in your aquarium for the bubble maker. If placing on the aquarium bottom, remove all gravel and debris from chosen location. Keeping the cord in place with suction cup. DO NOT submerge female transformer connector in aquarium water.
- Connect opposite end of airline tubing to air pump. Follow manufacturer’s instructions, warnings and safeguards when installing air pump.
- Connect female plug on bubble maker to the male plug on power adapter.
- Place the volcano stone over the bubble maker.
- Plug in air pump power cord and bubble maker transformer into a G.F. C.I outlet utilizing a drip loop.
Note: To achieve the desired amount of air bubbles, either insert a control valve in the airline tubing, or purchase an air pump with adjustable airflow.
Tips
- Allow bubble maker to soak for one hour in the water before turning on air supply.
- If algae buildup reduces airflow after extended use, remove bubbler disk from aquarium and clean surface with a stiff brush.
- Use more powerful air pump if the bubbler is not equally distributing.
- For suction cups to adhere properly, the surface must be completely clean.
Note: The volume and pressure output of your air pump will determine how large an area of the disk will release bubbles.
Maintenance
- Every week, remove gravel or debris that may have covered the airstone to ensure best possible performance.
- Every week, use a soft, non-abrasive cloth to remove any algae buildup on bubble maker.
- Periodically check airline tubing to make sure no water, debris or condensation has settled in. If there are any obstructions, remove airline tubing, soak in a 50-50 vinegar-water solution for 10 minutes. Rinse thoroughly with room-temperature water and allow to air dry completely. Re-attach airline tubing.
Note: Do not dispose of this product as normal household waste. Take it to you local reuse collection site.
Limited Warranty
NICREW products carry a one year limited warranty from the date of purchase.If
your product is within warranty and you require a replacement part or service,
please contact us at support@nicrew.com. For more
information, please visit www.nicrew.com.