tp-link Aginet EX1110 AXE11000 Tri-Band 10G WiFi 6E Router Installation Guide

Quick Installation Guide
AXE11000 Tri-Band 10G Wi-Fi 6E Router

Connect the Hardware

If your internet comes from an Ethernet outlet, connect the router’s WAN port to it, then follow step 4 and 5 to complete the hardware connection.

Configure the Router

1. Connect your computer to the router (Wired or Wireless)
   • Wired
   Turn off the Wi-Fi on your computer and connect it to the router via an Ethernet cable.
   • Wireless
   Connect your device to the router’s Wi-Fi using the SSID (network name) and Wireless Password printed on the label at the bottom of the router.

2. Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to get started.
   Note: If the login window does not appear, please refer to FAQ > Q1.
   

3. Follow the step-by-step instructions of the Quick Setup to complete the initial configuration.

Enjoy the Internet

Access Point Mode

If you already have a router, you can switch this new router to an access point to extend your existing network. Follow the steps below.

1. Power on the router.

2. Connect the router’s 10G WAN port to your wired router’s Ethernet port via an Ethernet cable as shown above.

3. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (Network Name) and Wireless Password.

4. Launch a web browser and enter http://tplinkwifi.net in the address bar.
   Create a password to log in. Follow the Quick Setup instructions to set up your network.

5. Go to Advanced > Operation Mode, select Access Point and click Save.

6. Wait for the router to reboot, then log in to the router and run the Quick Setup to complete the setup.

Aginet APP

You can easily manage your network through the Aginet app. Download and install the Aginet app. Search for Aginet on the Apple App Store or Google Play, or simply scan the QR code.

https://www.tp- link.com/app/qrcode/?app=aginet

Button Explanation

client to start the WPS process.
Reset| Press and hold the button for more than 5 seconds until the Power LED blinks to reset the router to its  factory default settings.

LED Indicators

European Union – Disposal and Recycling Information
The symbol below means that according to local regulations your product and/or its battery shall be disposed of separately from domestic waste. If this product is end of life, take it to a recycling station designated by local authorities. At  the time of disposal, the separate collection of your product and/or its battery will help save natural resources and ensure that the environment is sustainable development.
GNU General Public License Notice
This product may include software code developed by third parties, including software code subject to the GNU General Public License (“GPL”). As applicable, TP-Link (“TP-Link” in this context referring to the TP-Link entity offering respective software for download or being responsible for distribution of products that contain respective code) provides, by itself or with the support of third parties (e.g. the TP-Link Corporation Limited), mail service of a machine readable copy of the corresponding GPL source code on CD- ROM upon request via email or traditional paper mail. TP-Link will charge for a nominal cost to cover shipping and media charges as allowed under the GPL. This offer will be valid for at least 3 years.
For GPL inquiries and the GPL CD-ROM information, please contact
GPL@tp-link.com or write to Suite 901, New East Ocean Centre, Tsim Sha Tsui, Hong Kong. Additionally, TP-Link provides for a GPL-Code-Centre under https://www.tp-link.com/support/gpl/ where machine readable copies of the GPL
source codes used in TP-Link products are available for free download.
The GPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For further information about GNU General Public License please refer to the following website:
https://static.tp-link.com/resources/document/GPL%20License%20Terms.pdf

FAQ (Frequently Asked Questions)

Q1. What should I do if I can’t access the web management page?

Q2. What should I do if I can’t access the internet?

• Power off your modem for about 5 minutes, then power it on and check the internet. If your modem has more than one Ethernet port, keep other ports unconnected. • Check if the internet is working normally by connecting a computer directly to the modem via an Ethernet cable. If it is not, contact your internet service provider. • Log in to the web management page, and go to the Network Map page to check whether the internet IP address is valid or not. If it’s valid, go to Advanced > Network > Internet, click Edit, configure the corresponding WAN connection, and then click Advanced, select Use the Following DNS Addresses, set the primary DNS to 8.8.8.8, and set the secondary DNS to 8.8.4.4. If it is not, check the hardware connection or contact your internet service provider. • For cable modem users, connect a computer directly to the router using an Ethernet cable, log in to the router’s web management page and go to Advanced > Network > Internet > MAC Clone. Select Clone Current Computer MAC Address and click OK. Then reboot both the modem and the router.

Q3. What should I do if I forget my wireless password?

Q4. How do I restore the router to its factory default settings?

• With the router powered on, use a pin to press and hold the Reset button on the back panel of the router for more than 5 seconds until the Power LED blinks. • Log in to the web management page of the router. Go to System Tools

Backup & Restore, and click Factory Restore. The router will restore and reboot automatically.

Q5. What should I do if I forget my web management page password?

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU)
2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at  https://www .tp-link.com/support/ukca/
Safety Information
Keep the device away from water, fire, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Adapter shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of device. Please use this product with care and operate at your own risk.

References

• Link: Simple, secure one-click payments
• Trying to configure the Router? | TP-Link
• CE Regulatory Compliance | TP-Link
• GPL Code Center | TP-Link
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>