Protempo Us Dba Outdoor Tech THE TWIN PEAKS Wireless Speaker User Guide
- June 6, 2024
- Protempo Us Dba Outdoor Tech
Table of Contents
THE TWIN PEAKS WIRELESS SPEAKER
Good call on picking up the Outdoor Tech® The Twin Peaks Wireless Speaker. Your experience of the universe will soon be enhanced powerfully. This manual exists to help make sure that you use them correctly, so you’re definitely going to want to relax for a hot second and look through this. Kisses,
WHAT IS INCLUDED
Adjustable Wireless Speaker
USB charge cable
ANATOMY
A. Previous song
B. Volume down
C. Play/pause/answer/hang up
D. Volume up
E. Next song
F. Power on/off, mode switch
G. Micro SD card slot
H. Audio input port
I. DC5V charging port
J. LED charging indicator
K. Bluetooth mode indicator/call state indicator
CONTROLS
PREVIOUS SONG
NEXT SONG
VOLUME UP
VOLUME DOWN
PLAY /PAUSE ANSWER CALL
Short press to play and pause, short press to answer call, long press to
reject a call, when making a call short press to cancel the call, during a
call short press to hang up.
REJECT CALL CANCEL CALL HANG UP
POWER ON/OFF CHANGE BETWEEN MODES
Long press to turn on and off. Short press change aux/tf/Bluetooth mode
PORTS
Plug your Micro SD card with MP3 files into the Micro SD slot to play your
music.
Data Transmission jack: With a Micro SD card in the unit, connect the speaker
to a computer using the USB data charging cable, then you can download
materials from the computer to your Micro SD card, or delete or copy the
materials from the Micro SD card to computer.
AUX: Audio input jack, connect your audio player devices (computer, mobile
phone, MP3 player, etc.) using the 3.5mm to 3.5 mm audio cable.
Audio input jack, connect the speaker to a computer using the USB data
charging cable, then the audio of computer can be played through this the
speaker.
PAIRING
The blue LED light will flash to wait to pair with a Bluetooth device.
Choose: “ODT Twin Peaks” in your phone’s Bluetooth settings.
Once successfully paired you will hear a “connected” tone and the blue LED
light will stop flashing and stay solid.
(If prompted by your device to connect, select “Yes”. If prompted by your
device enter a password or use pairing code: 0000.)
If pairing fails, turn off the speaker or exit Bluetooth on your device and re-pair according to the method above.
If it doesn’t pair after about 20 seconds, blue LED lights will flash to wait to accept another audio source from AUX/Micro SD Card/Bluetooth.
CHARGING
The battery is low if you hear a “Du” tone or the speaker fails to turn on
(the blue LED will not be lit).
Use the USB charging data cable: Plug the micro USB end into the DC5V charging
port in the back of the speaker and plug the standard USB end into the USB
port of a computer or USB charging device.
When charging, the LED charging indicator will be lit up.
(We suggest using a standard “DC5V 500MA” charger to charge the speaker.)
MAKING CALLS / ANSWERING CALLS
(Speaker must be paired to your phone first)
Making calls: Choose one of the three methods on your mobile phone.
Transformer/iPhone/Speaker.
Transformer: The call audio will come through the speaker. Talk freely to the
speaker. (hands-free)
ANSWER CALLS – short press the play/pause button
HANG UP – short press the play/pause button
REJECT CALLS – long press the play/pause button
LED INDICATOR LIGHTS
Red LED light near the DC5V charging port:
Red LED will be solid when charging. The light will shut off when the charge
is complete.
The blue LED on the top of the speaker:
When Bluetooth pairing is successful the blue LED light will be solid.
When playing audio through Bluetooth the blue LED light will flash.
The blue LED light on the top of the speaker:
When on a call the blue LED light will flash.
SPECS
Bluetooth Version: V5.0
Operating Range Device to Speaker: 10 m (32 feet)
Play Time: 3-4 hrs
Charge Time: 2-3 hrs
Speaker Size: 52mm*2 Drivers
Speaker Sensitivity: 80±3dB
Speaker Impedance: 4ohm
Speaker Frequency Range: 160Hz~15KHz
Paired Devices: ODT Twin Peaks
Product Features: Answer call, end call, reject a call, volume control, track
control, Play/pause music, Micro SD card, AUX in play. Both sides ar rotatable
through 360° and provide new optics and sound in every direction.
FCC ID: 2A2L8-OT2875
DON’T BE SO ANTISOCIAL
Facebook.com/outdoortechnology
Twitter & Instagram: @outdoortech
Questions, comments, complaints, secret desires, or just to say what’s up
email
[email protected] K bye.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.